SMERAL LZK2500 28/65 SPM MECHANICAL HOT FORGING PRESS
2500 TON SMERAL MECHANICAL HOT FORGING PRESS
Model LZK2500
2500 Ton Rating
28/65 SPM
12.60” Ram/Slide Stroke
0.39” Slide Adjustment
35.60” Shut Height, SDAU
2” Stroke Upper Knockout
2.80” Stroke Lower Knockout
52” x 43” Slide Size
55” x 53” Bed Size
New Quick Change Hydraulic Bolster
Floor Space: 160” L x 157” W x 264” Ht. Above Floor
Weight: 320,000 Lbs.
Complete With AC Motor Drive With Electrical Controls
3/Phase/50-60 Hz/200-500 Volts.
Ref. CGS81437
EUMCO 2000 TON HOT FORGING PRESS
2000 TON EUMCO HOT FORGING PRESS
2000 Tons Capacity
300 mm Stroke
820 mm Die Height
800 mm x 1000 mm Slide Dimensions
920 mm x 1700 mm Bed Dimensions
20 mm Stroke Upper Knockout
50 mm Stroke Lower Knockout
100 Kw Main Motor Power
75 SPM
Ref. CGS81438
GLAMA-DEMAG GSM 120/250 RAIL MOUNTED MANIPULATORS
GLAMA-DEMAG GSM 120/250 RAIL MOUNTED MANIPULATORS
13.2 Ton, GLAMA-DEMAG GSM 120/250 RAIL MOUNTED MANIPULATORS W/ INGOT CARS (2AVAILABLE)
Manufacturer - Glama Demag SMS
Year - 1991
Status - Installed and under power
Specifications
Carrying Capacity: 13.2 US tons (120kN)
Clamping Moment: 90 ft tons (250 kNm)
Load Moment (Related to Center of Front Wheel): 173 ft tons (480kNm)
Peel Rotating Torque: 9 ft tons (25kNm)
Traction Force: 11 US tons (100 kN)
Parallel Horizontal Position of Tongs Center Above Floor: 41.34" - 76.77"
(1050mm-1950mm)
Parallel Vertical Stroke: 35.43" (900mm)
Vertical Tilt of Tongs (Up/Down): 6 degree up to floor down
Parallel Side Shift: +/- 7.87" (200mm)
Angular Side Shift: +/- 4 degree
Rail Gauge: 10' 6" (3200mm)
Overall Length - approx. 36'+ (11260mm)
Overall Width - approx. 12'+ (3720mm)
Overall Height - approx. 10'+ (3300mm)
Tongs Opening:
13" to 48" Square
13" to 55" Round
Tongs Opening with Inserts:
6" to 26" Square
6" to 31" Round
Max Turning Diameter of Fully Opened Tongs: 88.98" (2260mm)
Wheel Loads
Wheel Loads (Front Wheel w/o Load): 28600 lbs (13000 kg)
Wheel Loads (Rear Wheel w/o Load): 26400 lbs (12000 kg)
Wheel Loads (Front Wheel w/ Load): 52800 lbs (24000 kg)
Wheel Loads (Rear Wheel w/ Load): 15400 lbs (7000 kg)
Speeds
Travel Speed Forwards/Backwards
Forging - 23.5 IPS (0-600mm/s)
Transport - 32 _ IPS (0-833 mm/s)
Peel Rotate Speed Left/Right - 0-23 rpm
Lifting Lowering Speed - 5.5 IPS (140mm/s)
Vertical Tilt Speed - Up / Down: 3 degrees/s
Parallel Side Shift Speed: 4 ips (100mm/s)
Time for Tongs to Open / Close: 7s
Two (2) Ingot Cars
Capacity - 16.5 Tons (150 kN)
Travel Speed - 36m/min
Rotation Speed - 2 RPM
Travel Drive Powering - 5.5 kW
Rotary Drive Powering - 1.5 kW
Supply Voltage 460V/60 Hz
Overall Height - 1100mm
Overall Length - 4485mm
Overall Width - 1830mm
Turntable Diameter - 1600mm
Total Weight - 11,000 Lbs (50 kN)
STATUS
MACHINES ARE INSTALLED AND OPERATING INCLUDES ELECTRICAL, MECHANICAL AND
HYDRAULIC SPARE PARTS
Ref. CGS81439
SHL Alubin Cast House Line for producing aluminium billets of 7’’ and 8’’
SHL Alubin Cast House Line for producing aluminium billets of 7’’ and 8’’
Cast House Line for producing aluminium billets of 7’’ and 8’’
Make: SHL Alubin
Year: 1994 and up
- Input material: ingots and scrap
- Casting length: 5800 mm
- Gas-heated tilting furnace by Sistem Teknik/TR of 14 tons
and burner make Maxon
Melting capacity: 10 tons/h
- Filter box of Pyrotek of 15'' and controlled by PLC
- Hydraulic billet caster, hot top with 24 moulds, with water
cooling system and crane for billets
Ref. CGS81441