Strangpressanlage 2350 t
2350 t Strangpressanlage
Consisting off:
Log Heater Elhaus, year 1996, capacity approx. 4,3 ton/hour, with chain conveyor ,
1 pre-heating and 3 heating zones, modernization of gas control in 2004.
Log magazine, Elhaus, year 1996, log length up to 7000mm
Formats Ø 228, Ø 178,(flat-oval billets 160 x 332 mm, not complete - upper guide rolls are missing).
Hot shear Elhaus, year1996, changing sets for 3 formats
Blillet loader, Haginger, year 1991, modernization ( cylinder with measure system, 1999 ).
2350 Mton Extrusion Press, make Haginger, year 1991
- 4 tie rods
- Billets formats: Ø 228, Ø 178, flat-oval billets 162 x 334, in total 6 containers,
- Oilgear hydraulic, 3 Oilgear-main-pumps (1 x PVL + 2 x PVV) , 3 x 200 kW)
- Operational pressure: 285 bar
- Oil cooler, capacity 1200 kW
- oil tank 14000 litre
- PLC S7 press control, , new main cylinder and plunger in 2004,
- tool package: D 500 x 500,
- 6 press stems.
Run-out system
- Profile cooling by air fans / water
- Hot saw Elhaus, year 1996
- Single puller Elhaus, year 1996
- slat conveyor, Haginger, year 1991 with axial fans (2009).
- Cooling table 42.000 mm, belt distance 1200 mm, year 1991
- Cooling triangle with axial fans under cooling table, 3 rows of fans
- 90 ton Stretcher, Haginger, with Elhaus toongs,
- staorage table, Haginger, year 1991
- saw roller table, width 1000 mm, Haginger, year 1991, PU coat renewed in 2008
- Under-table finishing saw, make Kopischke, saw blade dia. 800 mm, year 1993, suction 4 kW, PLC Siemens S7
- Saw table, Kopischke, ca. 13.500 mm long, year 1993
- Saw measure bedstop, Haginger, ca. 13.500 mm, year 1991
- Container pre-heating furnace, Haginger, year 1991
- Spare Parts, e.g. 1 main hydraulic pump, misc. cylinder, valves, …
Ref. CGS121343
SMERAL LKM-4000 Hot forging press (Maximum strokes of lower ejector: 80
Hot forging press SMERAL LKM-4000
YOM: refurbished in 2012
Manufacturer: SMERAL
Made in: Czech Republic
Specification:
Slide stroke: 400 mm
Number of continuous strokes per minute: 50
Shut height, slide up: 1400 mm
Distance between press columns under slide guides: 1500 mm
Table dimensions LR x FB: 1120x1600 mm
Slide dimensions LR x FB: 1320x1320 mm
Maximum force in lower dead point: 4000 tons
Compressed air working pressure: 6 bar
Total compressed air consumption per stroke with 6 bar pressure: 75 liters
Main electrical motor: 220/730 kW/rpm
Overall dimensions for shop layout LR x FB: 6280x4885 mm
Maximum height over above floor level: 7315 mm
Total height of the press: 8870 mm
Total weight of the press: 285 tons
Number of lower ejectors (pneumatic): 1
Maximum force of lower ejector: 25 tons
Maximum strokes of lower ejector: 80
Ref. CGS1142
WILKINS & MITCHELL L66-5-4-10 - 600T Straight-sided PRESS
Straight-sided PRESS WILKINS & MITCHELL
Type L66-5-4-10 - 600T.
TECHNICAL DATA
Capacity 600 T.
Stroke 254 mm
Stroking rate 28 str./min
Adjustment with wedge areaunder the ram10 mm
Die height (stroke down, without the adjustment system under the ram and with false table 225 mm thick) 762 mm
Table area 1650 x 1300 mm
Ram area
False table Thickness: 230 mm
Dimensions of the press:
2700 x 2000 mm
Height: 5700 mm
Weight (approx.) 42 T.
Remarks:
- 4 rods
- 2 side balancers
- centralised lubrication system
Ref. CGS1147
LASCO KH 12,5 Forging Hammer Build : 1964
LASCO Forging Hammer
Type : KH 12,5
Build : 1964
Technical dates :
Capacity 1 ¼ "
Variable electrical/ hydraulic speeds
Total weight 28 Ton
CGS11410
TITAN CNC HORIZONTAL FLOOR BORER
Build : 1986
Rebuild : 2004
Command : CNC 840D / SIEMENS
Technical details
Spindle Diameter: 200 mm
Spindle travel: 1.500 mm
Table longitudinal travel: 9.000 mm
Table vertical Travel: 2.950 mm
Table cross travel: 800 mm
Table width: 2.700 mm
Table Length: 15.000 mm
All the axis scraping work has been done and retrofit with SIEMENS Drives, motors and
840D operating system in 2004
Ref. CGS1149
