Aluminium-and-Other-Non-Fer.jpgCement-Plant.jpgCrawler-Cranes.jpgCrude-Oil-Refineries.jpgForging-Plant-and-Machinery.jpgForging-Plant.jpgHeavy-Machine-Tools.jpgHeavy-Material-Handling.jpgIron-&-Steel-Mills.jpgMachine-Tools.jpgPacking-Plants.jpgPaper-Plant-and-Machinery.jpgPort-Handling.jpgPower-Plant.jpgPrinting-Press-Plant.jpgSheet-Metal-Plant-and-Machi.jpgVertical-Turret-Lathes.jpg

FOR LATEST OFFERS PLEASE VISIT OUR NEW WEBSITE www.bpmbllp.com

Voronezh 2500 Tons Knuckle Joint Press

Voronezh 2500 Tons Knuckle Joint Press

Knuckle joint press VORONEZH
YOM: 1982
Manufacturer: Voronezh
Made in: Russia
Specification:
Nominal force: 2500 tons
Ram stroke: 190 mm
Number of strokes in 1 minute: 14-20
Shut height: 560 mm
Bolster plate-to-ram adjustable stroke: 15
Ram course in bottom position with max. power: 4,5
Table size: 1250x1400 mm
Ram size:
-Front-to-back: 900 mm
-Left-to-right: 1250 mm
Lower knockout:
-Stroke: 50 mm
-Force: 100 kN
Upper knockout:
-Stroke: 40 mm
-Force: 100 kN
Main motor: 77 kW, 380 V
Overall dimensions: 4770x3050x5890 mm
Weight: 125 tons

Ref. CGS121334

SMERAL LKM-4000 Hot forging press - Slide stroke: 400 mm

Hot forging press SMERAL LKM-4000
YOM: refurbished in 2012
Manufacturer: SMERAL
Made in: Czech Republic
Specification:
Slide stroke: 400 mm
Number of continuous strokes per minute: 50
Shut height, slide up: 1400 mm
Distance between press columns under slide guides: 1500 mm
Table dimensions LR x FB: 1120x1600 mm
Slide dimensions LR x FB: 1320x1320 mm
Maximum force in lower dead point: 4000 tons
Compressed air working pressure: 6 bar
Total compressed air consumption per stroke with 6 bar pressure: 75 liters
Main electrical motor: 220/730 kW/rpm
Overall dimensions for shop layout LR x FB: 6280x4885 mm
Maximum height over above floor level: 7315 mm
Total height of the press: 8870 mm
Total weight of the press: 285 tons
Number of lower ejectors (pneumatic): 1
Maximum force of lower ejector: 25 tons
Maximum strokes of lower ejector: 80

Ref.CGS121335

Hasenclever 1250 TONS Friction Screw Press

1250 TONS SCREW PRESS
Hasenclever Friction Screw Press
Capacity 1250 tons.
Stroke 18".
Bed approx. 36" X 36".
Ejector.
Complete with some spares.
Full set of manuals and documentation.
Requires pit 36" deep.

Ref.CGS121337

KURIMOTO F-2500 Hot Forging Press

Hot Forging Press KURIMOTO F-2500
YOM: 1977
Condition: good working
Technical specification:
Rated force TN 2500
Slide stroke, mm 320
Frequency of the slide strokes per min 55
Distance between table and punch plate
of slider in case of upper table location, mm 890
Adjustment, mm 16
Bed dimensions, mm 1250x1400
Slider dimensions, mm 1100x1150
Air pressure consumption, kgs/cm2 5
Drive power, kW 110
Stroke of bottom extractor, mm 60
Stroke of upper extractor, mm 50
Mass, TN 300

Ref. CGS121342

Copyright © 2013-14 Channels Global Sourcing LLP. All Rights Reserved
Powered By MSD Solutions