Barnaul K8338 630 tons coining press
630 tons model K8338
Press new 1978 year, now is in working condition
Press without upper ejector, bottom ejector - only have level
Technical characteristic of coining press К8338 (Barnaul)
Specifications
Nominal force, 630 tf
Slide stroke, 150 mm
Maximum distance between bed and slide, stroke down, 560 mm
Number of slide strokes per minute 40
Bed dimensions,:
left-to-right 800 mm
front-to-back 630 mm
Main motor power, 21 кW
Overall dimensions, mm:
left-to-right 1800 mm
front-to-back 1700 mm
Height above floor level 3160 mm
Mass 14300 kg
Ref.. CGS121318
Tmp KB8544 2500 tons Forging Press
2500 tons model KB8544
Press new on 1982 year
Now is in working condition
Press have slide adjustment, two conrods, oil lubrication
Main Technical Parameters And Description
Of 2,500-Ton Forging Press
Manufacturer – Tmp, Russia,
Nominal capacity, 2500 metric tons
Slide stroke 350 mm
Number of continuous stroke per min 70
Number of single strokes per min 20
Die height, 890 mm
Adjustment, 10 mm
Bed dimensions
left to right 1280 mm
front to back 1400 mm
Slide dimensions,
left to right 1090 mm
front to back 1150 mm
Main drive electrical motor power, 90 kW
Press overall dimensions,
left to right 5940 mm
front to back 4330 mm
height above floor level 7300 mm
The press has oil recirculating oil lubrication, double pitman design; shut height adjustment built into the ram. The press designed without drive shaft with direct drive from the motor pulley to te clutch. In order to unload the eccentric shaft from the clutch weight the clutch-side bearing housing has the extended part where the whole clutch assembly sits. Combined with advanced oil lubrication it provides extremely long life cycle for eccentric shaft bearings.
Ref.. CGS121323
Voronezh Kb 8542 1600t Hot Forging Press
Hot forging press VORONEZH model KB 8542 1600t
Year: 1988
Tech data:
Maximum force ton-force 1600
Slider stroke length mm 300
Slider strokes per minute 85
Maximum distance between table and slider (in lower position of slider) mm 660
Size of adjustment of distance between a table and slider mm 10
Course of the top ejector mm 50
Force of a top ejector 63 kN
Course of the bottom ejector mm 50
Force of a bottom ejector 100 kN
Bed overall dimensions: mm 940 x 1200
Slider overall dimensions: mm 860 x 910
Main electric motor power kW 90
Press overall dimensions mm
- length 4850
- width 3515
- height 5570
Press weight kg 119 660
Ref. CGS121325
SKODA - floor type - W 160H - 1983
SKODA - floor type - W 160H - 1983 -
- DRO
- X/Y/Z/W = 8000/3150/1600/1250
- SKODA rotary table E 20 from 1983 (table 2500x2000)
- floor plates 4 pcs x 5620x1880 mm
- milling heads (vertical + angle)
Ref. CGS121333
