OPEN DIE FORGING PRESS CAPACITY 5000 TONS WITH 80 TONS MANIPULATOR
47/50MN Ton Open Die Forging Press.
Four Column Push Down Open Die Forging Press with 80 Ton Rail Bound Manipulator.
47/50MN Ton Four Column Push Down Open Die Forging Press
with 80 Ton Rail Bound Manipulator is
a perfect combination of the up-to-date design, advanced German
consulting and fully skilled DSK engineering.
This machine consists of 3 cylinders, 4 columns, crown, slide, bed,
magazine, manipulator, table, side bed and other accessories,
and equipped with Siemens S7 PLC (Siemens S7-400 Series) system.
Ref : 11222
WOOD MAKE OPEN DIE FORGING PRESS ( WATER TYPE) + 2 X OIL GEAR MAKE- OIL HYDRAULIC + 8 TONS DANGO & DIENENTHAL RBM
( The original water type hydraulics can be replaced with 2 x OIL GEAR - Oil type hydraulics) :
1,500 ton Wood Heavy Duty 4-Column Push Down
Hydraulic Open Die Forging Press w/1,500hp Hyd room
Manufacturer: Wood
Model:
Rated forge tonnage: 1,500 tons
Ram stroke: 36" (914mm)
Press daylight: 84" (2,134mm)
Press shut height: 48" (1,219mm)
Column diameter: 11-3/4" (298mm)
Clear distance between the guides: 52.5" (1,334mm)
Max working pressure: 3,200 PSI
Bed front to back: 54" (1,372mm)
Bed left to right: 63" (1,600mm)
Height above floor line: 270" (6,858mm)
Still installed, this press is in excellent working condition and is available for immediate inspection and delivery.
It is complete with all hydraulics and electrics and will be supplied with three (3) Worthington pumps each driven by its own separate 500hp Westinghouse motor
Oilgear 10,000 PSI Self-Contained Oil-Hydraulic Power Units
Skid-Mounted to Provide "On Call" Portable Hydraulic Power
Manufacturer: Oilgear
Model: PSU (Power Skid Unit)
Unit pressure rating: 10,000 PSI
Year of manufacture: 1988
Each pump is rated at: 5,000 PSI
Portable Skid Mounted: For ease of movement
Oil Resevoir capacity: 500 gallons
Motor power/electrics: 300hp/1200rpm/2300volts
Skid length: 222"
Skid width: 72"
Skid height: 98-1/2"
Net weight of each unit: 18,000 lbs
Add additional Hydraulic Power to a Press at any time!
Pressure can easily be regulated on each side of a press ram.
These units are Self-Contained. They just need Power and are ready to run.
Each Self-Contained Hydraulic Power Unit is Skid Mounted and is equipped with the following:
• (2) Oilgear PVL320 5,000 PSI Servo-Controlled pumps
(each pump puts out 162gpm at 5,000 PSI)
• Both pumps on each power unit are driven by a single 300hp 2300V motor
• A servo Regulator is installed which enables the regulating of pressure and speed simultaneously
• High Voltage Motor Starter and electrical system (runs at 50 or 60Hz)
• Controls are GE Vacuum Limitamp Controls
• Valve-Manifold Pressure Control System
• 500 gallon Hydraulic Oil Resevoir
• Water cooling system
• Each Unit weighs approximately nine (9) tons
Very Little Usage - One Unit has been used 48 total hours & one 68 total hours.
Both are in Excellent Condition available for immediate inspection and delivery.
8 ton Dango & Dienenthal SMp 8000
Rail Bound Forging Manipulator .
Manufacturer: Dango & Dienenthal
Model: SMp 8000
Max bar diameter: 830mm
Max square bar: 780mm
Min bar diameter: 270mm
Min square bar: 270mm
Jaw turning range: 1 - 12 rpm
Forward/backward speed range: 2 - 50 mtrs/min
Max jaw opening: 800mm
Jaws lift/lowered: 7 sec / 7 sec
Movement forward/backwards: 2-50 mtrs/min
Weight w/o block: 40,000 kgs.
This Manipulator is computer controlled without operator. It is available for immediate inspection and delivery.
Ref : 12113
SMERAL 4000 TONS HOT FORGING PRESS
Press capacity – 4000tons
Slide stroke – 400mm
Slide size – 1320 x1320mm
Table size - 1120 x 1600mm
Ref : 11113
VORONEZH K8544, 2500 TONS, HOT FORGING PRESSES
Force 2500 tons,
Slide stroke 350 mm,
number of strokes per/min 70,
shut height 890 mm,
bolster plate to ram adjustment stroke 10 mm,
bed dimensions 1200 x 1400 mm,
ram dimensions 1070 x 1120 mm,
window in upset 1000 x 720 mm,
main drive motor power 120 KW,
dimensions 5585 x 3750 x 6830 mm,
weight 183,5 tons.
Ref : 11114
