VEB THREAD ROLLING MACHINE
YOM - 2000, Made by: VEB, Type of control: conventional, thread pitch: max 4 mm, rolling power: 12,5 Mp/t, min. diam.: 3 mm, max. diam.: 70 mm, spindle turning speed range: 20-90 U/min, total power requirement: 6 kW, dimensions of the machine ca.: 1,56x1,32x1,45 m, Weight: 1,6 to
Ref : 31279
BLAW KNOX MEDART 310 MM, 12 RFR 6 BAR PEELING MACHINE
Serial Number is 1746
Max. peeling diameter 310mm ( 12”)
Min peeling diameter 60mm ( 2.3”)
Max bar length 17 meters
Min bar length 3.5 meters.
Main motor Power : 110 kW
Front carrying device : approx. 8 meters + 1 extra independent length of 3.5 Meters
Rear carrying device : approx.12 meters + 1 extra independent length of 3 Meters
Machine is equiped with front and back hydraulic carriage, scraps evacuating device and Electric command panel has been renovated a few years ago
Ref : 31297
LASCO KFP 1250 HYDRAULIC VERTICAL EXTRUSION PRESS
TECHNICAL DATA
Manufacturer Lasco Model KFP 1250
Year of Manufacture 1981
Press Force 12,500 kN (14,000 kN)
Return Force 13,000 kN
Ram Stroke 1250mm
Ram Ejector Force 400 kN
Ram Ejector Stroke 200mm
Ejector Force 1000 kN
Ejector Stroke 600mm
Installation Height 2400mm
Daylight Between Guides 1400mm
Table Area (width x depth) 1100 x 1400mm
Ram Return Speed 500mm/sec
Pressing Speed 55 mm/sec
Dimensions Width 5000mm
Depth 3900mm
Height (Above Floor Level) 6800mm
Depth (Below Floor Level) 3100mm
KFP 1250 Press
New Siemens Electrical Controls (2010)
Control Console (2010)
Ref : 41214
DEMAG 2000 TONS HYDRAULIC FORGING PRESS
TECHNICAL DATA
Press
Capacity 2000 T.
YOM 1976
Pressure 350 bars
Return power 400 T.
Stroke 1500 mm
Daylight
3000 mm
Table 2700 x 1600 mm
Movement lateral of table 3200 mm
Descending speed, working position ram
6,1 à 91,2 mm/sec
Return speed, 92,5 to 370 mm/sec
Approching speed 380 mm/sec
Manipulator
Trade DEMAG/GLAMA
Power 12 T.
Opening tools Ø 1000
Height adjustment tools 800 mm
Ref : 41239
