Aluminium-and-Other-Non-Fer.jpgCement-Plant.jpgCrawler-Cranes.jpgCrude-Oil-Refineries.jpgForging-Plant-and-Machinery.jpgForging-Plant.jpgHeavy-Machine-Tools.jpgHeavy-Material-Handling.jpgIron-&-Steel-Mills.jpgMachine-Tools.jpgPacking-Plants.jpgPaper-Plant-and-Machinery.jpgPort-Handling.jpgPower-Plant.jpgPrinting-Press-Plant.jpgSheet-Metal-Plant-and-Machi.jpgVertical-Turret-Lathes.jpg

FOR LATEST OFFERS PLEASE VISIT OUR NEW WEBSITE www.bpmbllp.com

3500MM RING MILL

H/280/V180-Ø3500 RING MILL          
          
1. Ring Rolling Mill          
          
The horizontal / vertical ring rolling mill is provided for rolling seamless rings at forging temperature.         
          
2. Working Range          
          
Outside Diameter of finished ring : 600 ~ 3500 mm 
Height of finished of ring blank for : 00 ~ 750 mm 
 Mandrel diameter Ø220mm  :  min.  240mm 
 Height of ring blank :  max.  1050mm 
Ratio of wall thickness to height : max. approx.         3 : 1 
Ring weight : max. approx.    8000 kg 
          
 The max. possible ring weight as well as the obtainable ratio "wall thickness          
to height" is dependent on the cross section of the ring, the ring profile and          
the ring material, its deformation resistance depending on temperature,          
and on deformation speed.         
          
3. Main Characteristics          
          
3-1. Horizontal Stand         
Rolling force :  max.    280 ton 
Main roll diameter : Ø1000 mm 
No. of revolution of main roll  : max.  29.5 rpm 
Rolling speed :  max. approx.  1.5 m/sec 
Horizontal stroke of mandrel  : 600 mm 
          
3-2. Vertical Stand         
Rolling force : max.                 180 ton 
 Length of taper rolls theoretical stand  : 1000 mm 
Taper cone angle  : 32˚  
 Horizontal stroke of vertical stand : 3500 mm 
Vertical stroke of upper taper roll : 1000mm 
Max. distance between the taper rolls : 1050mm 
          
          
4. Driving Unit          
          
4-1 Driving Unit of Main roll         
4-1-1 Driving motor(DC-Electro motor)        
 Nominal power  : 500KW 
 Armature voltage  : 440V 
4-1-2 Driving gear reducer        
 Nominal power : 500KW 
 Ratio of Reducer : 1/40 
          
4-2 Driving Unit of Taper roll         
4-2-1 Driving motor(DC-Electro motor)        
Nominal power : 370KW 
Armature voltage : 440V 
4-2-2 Driving gear reducer        
Nominal power : 370KW 
Ratio of Reducer : 1/12 
          
5. Driving Units for Hydraulic Power Unit          
          
5-1 Driving Motor for Hydraulic Pumps         
5-1-1 Ac-Electro-motor for main Pump        
    - Nominal Power : 75kw  - 4set 
    - Nominal Speed  : 1000 rpm 
5-1-2 Ac-Electro-motor for Oil Cooler        
    - Nominal Power : 3.7kw - 2set 
    - Nominal Speed  : 1500 rpm 
          
5-2 Hydraulic Pumps         
  5-2-1 Main Pump : A7V-160  - 4set 
    - Delivery  : 4-180 l/min 
  5-2-2 Pump for Oil Cooler : PVV2-055:  2set 
  5-2-3 Operation Pressure : 250 kg/㎠ 
          
6. Grease Lubrication Unit(for lubrication of the moveable machine components)          
  - Grease Pump : 2set 
          
7. Cooling of Roll tools(The roll tools are cooled by water)          
    - Pressure : 0.2kg/㎠ 
          
          
8. Electric Equipment          
  - Power Supply Unit         
  - Control Desk         
  - Control Cabinet         
          
9. Control and Operation Function          
  - Control functions are realized in the PLC         
  - Operation for the passes : Pressure control 
          
10. Actual Value Display for the Ring          
  - Ring O.D         
  - Ring I.D(Calculated)         
  - Ring wall Thickness         
  - Ring height         
          
11. Selection of the Final Diameter          
  - Ring O.D         
  - Ring I.D         

Ref. 51280

 

VORONEJ K 863, 1000 TONS MECHANICAL FORGING PRESS

YOM - 1964, Press capacity: 1 000 ToF, Ram stroke: 250 mm,
Distance between ram and table: 560 mm, Stroke for eject the piece: 50 mm on ram/0 mm on table,
Stroke /min: 80, Max outer diameter of piece: 120 mm, Max. weight of piece: 3.3 kg, Area of machine : 2500 x 2200 mm,
Hight of machine: 5800 mm, Main motor: 55 KW, Weight: 55

Ref. 51287

EUMUCO SP 100, 1000 TONS FORGING PRESS

Serial No. 83-632, Mfg. 1964
Pressing power 1000 ton,
Table area 850x900 mm,
Ram area 730x760 mm,
Stroke 250 mm
spm- 100
Max. distance between table/ram 820 mm,
Clearance between columns 880 mm
Height of Ram adjustment 17.5mm,
Driving motor 37kW at 1500RPM,
Weight of machine 50t

Good working condition. Dismantled some months ago, and replaced in our warehouse.

Ref. 51288

SKMZ KRAMATORSK M2150, FORMING STEAM-AIR HAMMER, 1979 YOM

 

Manufacturer - SKMZ, Kramatorsk

Technical specification:
Falling parts weight.......................10000 kg
Impact energy........26000 kilogram-force/m
Max ram stroke..............................1400 mm
Distance between guides...............1000 mm
Minimum die ht...............................450 mm
Ram front to back..........................1180 mm
Die holder front to back.................1320 mm

Air pressure..................................7+/-9 atm
Hammer dimensions, mm:
     - length ………………………….......... 4400
     - width ……………………………….… 2700
     - height ………………………..…….. 10.450
Anvil weight, kg ……………………… 200.482
Weight of hammer with anvil, kg … 286.377
 
The hammer is in dismantled condition.

Ref. 51290

Copyright © 2013-14 Channels Global Sourcing LLP. All Rights Reserved
Powered By MSD Solutions