DNEIPER 500 TONS OPEN DIE FORGING COMPLEX
Comprising: 5t Rail bound Furnace charger – Dneiper 500t Draw Down Hydraulic Arch type Open Die Forging Press.
4 Station Toll Changer – 2.5t Dneiper Rail Bound Forging Manipulator – Rail Bound Turntable.
Supplied New: 1980
Ref. 51319
KURIMOTO, F - 2500 Tons HOT FORGING PRESS
Year of manufacture – 1977
Very good condition,
no missing parts
machine wasn’t working since 90’s
in our opinion only gear wheels should be changed
Technical details :
Press capacity - 2500tons
Slide stroke - 320mm
Number of strokes per min: 35
Number of working strokes per min: 20
Shut height 890 mm
Shut height adjustment 16mm
Table size, mm - 1250 x 1400
Slide size, mm - 1100 x 1150
Die height, mm - 1350
Capacity and strokes of the ejectors, tons x mm
Upper ejector 5 x 50
Lower ejector 50 x 60
Main motor - 380V, 50Hz, 110 kW
Weight of the press – 205tons
Ref. 51320
SMERAL LLR 1000 A, Toggle Coining Presses
Assembled
Very good condition
Technical details :
- The LLR 1000 A is a toggle coining presses with a rated forming force of 10,000 kN.
- The press is intended for both cold and hot stamping, extruding, sizing and straightening of flat and shaped parts.
- The foundation unit of all presses is the frame which, for the LLR 1000 A press, is welded.
- The torsional moment of the engine is transmitted via V-belts onto and geared drive through a toggle mechanism on the press ram.
Rated forming force 10 000 kN
effective stroke at nominal forming force 3 mm
Ram stroke 140 mm
Ram adjustment 15 mm
Shut height 630 mm
Width between uprights
under guide ways 900mm
Working area ram 710 x 650 mm
Working area table 1000 x 900mm
Number of ram strokes during
contrnuous run 36 min
Number of useful ram strokes 20min
Upper ejector - ejecting force 100 kN
Upper ejectror – stroke 30mm
Lower ejector - ejecting force 200 kN
Lower ejectror – stroke 60 mm
- left to right 2 840 mm
- front to back 2 380 mm
- height above floor 3 815mm
- height of the Press 4 115mm
Total press weigh 37 000 kg
lnput of the main electric motor 37 kW
Sucked air consumption
"single stroke" (dm" per stroke) 28 dm /zdvh
Total installed input 39 kW
Ref. 51321
SMERAL LZK 4000 Hot Forging Press
Machine complete
Excellent good condition
Under power
Technical details :
Rated force - 4000 t
Slide stroke - 380 mm
Frequency of the slide strokes per min - 55
Max distance between slider and bed - 1380 mm
Width of bed under guide lines - 1580 mm
Bed dimensions - 1520x1600 mm
Slider dimensions - 1450x1440 mm
Slider adjustment - 15 mm
Stroke of middle lower extractor:
Working - 31 mm
Max (for die changing) - 41,5 mm
Stroke of upper extractor - 70 mm
Working air pressure - 6 atm
Overall air expense - 250 l/min
Water expense - 13 l/min
Drive capacity - 200 kW
Quantity of used strokes per min - 22
Overall width of machine - 4440 mm
Overall depth of machine - 4656 mm
Overall height of machine - 8570 mm
Height of machine under floor level - 7520 mm
Overall weight (net) - 245 000 kg
Working voltage of main drive - 3x380 V
Frequency – 50 Hz
Overall used machine capacity – 200 kW
Working air pressure - 6 kilogram-force/cm2
Ref. 51322
