1250 TON FORGING PRESS WITH MANIPULATOR
1250 TON FORGING PRESS WITH MANIPULATOR
With below specifications:
Year of production is 1971.
• nominal pressure 600/1250t
• Max. Slider stroke 1250 mm
• Distant. From table to the slider in the top position 2780mm
• The distance between columns 1900/800mm
• Dimensions of movable table 1500x3000mm
• Press height 6950mm
• Weight of the press 171000kg
Ref.CGS81448
Weingarten GDK 2200 horizontal cold chamber pressure die casting machine
1 horizontal cold chamber pressure die casting machine
Make: Weingarten
Model: GDK 2200
New in: 1980/2001
The machine is equipped with:
- Tiebar withdrawel 2 fold, half automatic
- Motorized die height adjustment
- Hydraulic ejector
- Connections to operate core pull unit
- Locking stroke safety device - electro-hydr.
- Central lubrication, modernised in 2001
- Pneumatic safety doors
- Trimming pres,make: REIS, Model: SEP 90-30, 30 to (Option)
- Take-out unit, make: Robot KUKA new in 1996 (Option)
- Hydraulic medium: water-glycol
- SPS Control Siemens S 7, installed 2001
TECHNICAL SPECIFICATIONS:
Locking force 2300 tons
Injection force 160 tons
Ejector force 65 tons
Ejector stroke 0 - 250 mm
Platen dimensions - h x v 2280 x 2200 mm
Distance between tie-bars - h x v 1400 x 1400 mm
Tie-bar-diameter 280 mm
Injection plunger stroke 1000 mm
Max. Shot weight - Al 40 kg
Max. projected area with above pressure 5750 cm2
Cycles in idle motion 240 /h
Driving capacity approx. 118 kW
Floor space (L x W) approx. 13900 x 3400 mm
Height of the machine approx. 4200 mm
Weight approx. 155 tons
Ref.CGS81455
KRAMATORSK 4000 ton Hot forging press
Hot forging press KRAMATORSK 4000 ton
Technical specification:
Force 4000t
Stroke 400 mm
Strokes per min 50
Shut height 1060 mm
Adjustment 15 mm
Distance between columns 1700 mm
Slider dimensions 1420 x 1430 mm
Bed dimensions 1620 x 1680 mm
Top ejector:
- stroke 75 mm
- force 20 t
Bottom ejector
- stroke 200 mm
- force 200 t
Main motor force 200 kW
Overall dimensions: 7200 x 5812 x 10420 mm
Weight 367 760 kg
Ref. CGS41610
SMERAL LKM 4000 ton Hot forging press
Hot forging press SMERAL LKM 4000 ton
Technical specification:
Max pressure at the end of stroke: 4000 t
Press stroke: 400 mm
Number of stroke: 50 per minute
Max distance of stroke from the table: 1400 mm
Dimensions of slider: 1320 x 1320 mm
Bed dimensions: 1120 x 1600 mm
Bed movement by height: 20 mm
Max pressure of upper ejector: 20 t
Max stroke of upper ejector: 65 mm
Max pressure of lower ejector: 40 t
Max stroke of lower ejector: 80 mm
Main motor power: 225 kW
Main motor speed: 730 rpm
Total width: 6280 mm
Total depth: 4885 mm
Total height: 8870 mm
Height over the bed: 7315 mm
Total net weight: 280 092 kg
Ref. CGS41611
