Demag 6 Ton Charging Manipulator
Demag 6 Ton Charging Manipulator.
6 TON DEMAG CHARGING MANIPULATOR
Ref. CGS101329
Demag TC 600 140 Ton
Demag TC 600 140 Ton
capacity: 140 ton, year of
manufacture: 1978,
Ref. CGS101330
Duisburg 7500 Ton Hydr. Open Die Forging Press
DUISBURG" HYDR. OPEN DIE FORGING PRESS 7500 TON
Technical dates :
This press comes with a multiplier that can increase the forging force up to 7500 ton
Nominal Force. 80 MN
Upsetting Force. 90 MN
Force at diff. Stages
4 colulmn Down Stroke 1 Cylinder 27 MN
2 Cylinder 54 MN
3 Cylinder 80 MN
Upsetting Force. 90 MN
Working Pressure At Force 60 MN 26,6 Mpa
Upsetting Force 75 MN 30 Mpa
Cylinder Diameter 1130 mm
Return Force - KN
Stroke 2500 mm
Admissible Eccentricity dia. - mm
Vertical Daylight 6150 mm
Pitch between Columns. in Working centreline 5000 mm
Pitch between Columns. Perpendicular 2500 mm
internal width inside columns with protection 4200 mm
Press height at ground level 13370 mm
full height 18060 mm
Longitudinal Table Useable area W x L 9180 x 3000 mm
Shifting force - KN
Shifting stroke AU side 4 m
Shifting stroke opposite 5 m
Die Shifting Device No. of dies in play No
Stroke No
Shifting Force No
Top Die Clamping Device Clamping Force
Mode of Hydraulic Drive -
Mode of Hydraulic Control -
Speeds 1 Cylinder (24 MN) - mm/s
2 Cylinder (36 MN) - mm/s
3 Cylinder (60 MN) 130 mm/s
Upset Speed - mm/s
Approach Speed 300 mm/s
Return Speed 500 mm/s
Table Shifting Speed 350 mm/s
Die Shifting Speed No
Cycling Frequency Idling 24 MN 25 Stroke/min
Cycling Frequency Idling 36 MN 25 Stroke/min
Cycling Frequency Idling max force 25 Stroke/min
Ejector no
Installed Capacity - KW
Ref. CGS101334
Hottinger Cb-16-Ha Core Shooting With Foundry Dust Extraction
2 UNITS CORE SHOOTING WITH FOUNDRY DUST EXTRACTION
with 2 ROBOTS ABB
Brand: Hottinger
Type: CB-16-HA
New in: 2001
Complete with
- 2 ABB robots
- Control cabinets
- Hydraulic power units
Ref. CGS101335
