16-TON (35,000 LBS) HAMMER MAIN PARAMETERS
16-TON (35,000 LBS) HAMMER MAIN PARAMETERS
Description
Blow energy 400 kJ
Weight of falling parts 16,000 kg
Number of continuous blows 45 per minute
Distance between ram guides 1,180 mm
Minimum height of die without dovetail 500 mm
Ram dimension from front to back 1,500 mm
Sowblock dimension from front to back 1,600 mm
Compressed air consumption cubic 100 m/min
Ram stroke 1,500 mm
Layout overall dimensions 4,500 x 2,450 mm
Height above floor level 7,900 mm
Overall weight 426,870 kg
Anwil weight 336,870 kg
Ref. CGS81324
AUTOCOMPRESSOR HAMMERTYPE M 4136
NEW AUTOCOMPRESSOR HAMMERTYPE M 4136
TECHNICAL DATA
Energy of blow 950 Kg.m
400 kg
Stroking rate 130 cps/min
Max. stroke 700 mm
Depth of throat 520 mm
Striking area 265 x 100 mm
Working height over the floor 750 mm
Motor 28 kW
Dimensions on the floor 1270 x 3105 mm
Height over the floor 2720 mm
Weight of anvil block 5 T
Total weight 13,8 T
Alpine 1600mm MDO Machine
Alpine 1600mm MDO Machine
MDO Machine , condition like new ! Never used for production. Only test run !
Manufacturer / year : Alpine - Produced in 2007, arrived in factory end of 2008
Working width : 1600mm
Unwind : Single
Unwind diameter : 1000mm
Inlet speed : 5 – 70 m/min
Outlet speed : 5 – 200 m/min
Inlet film thickness : 100 – 500 micron
Outlet film thickness : LDPE 20 – 200um - HDPE 10 – 80um ( PET & PVC)
Rewind : Turret fully automatic with flying splice (manufactured by T.C.M.)
Rewind diameter : 1000mm
Corona treatment : Yes, AFS from 2007
Line consists of : Unwind & Pre heating section & Stretching section & Annealing section
Cooling section & Rewinder & Edge trim rewind etc...
Erfurt SCPK 800 Billet Shear - Year: 1984
Billet Shear Erfurt ScPK 800
Year: 1984
Tech data:
Maximum Cutting Force : 800 Tons
Cutting Speed : 20 Strokes/min continuous
Cutting Speed : 16 Strokes/min single stroke
Main Drive Motor : 55 kW
Weight Of Shear : 36 Ton
Ref. CGS81343
