INGRAMATIC VIRAT AUTOMATED LINE / NEDSCHRO MМ1207 AUTOMATIC COLD UPSETTER
Cold upsetting equipment
1. Automated line manufactured by an Italian company “Ingramatic”, “Virati” purposed for making rivets, screws, nails, consisting of:
- gauging machine 5MTL 06.028 - 5,5. Screw diameter – up to 6,35 mm;
- automatic cold upsetterTF-550-SV, capacity 400 items per minute;
- automatic machine for cold upsetting of nails V17R/85;
- rolling automated machine for nails RP1-V/592;
- assembling machine for hollow rivet nails AR/1;
- lifting elevator СЕ1,
- washing machine for degreasing of items RO-293, capacity 83 lts.
1990 YOM.
The line was exploited since 1990 till 2005.
2. 6-coordinate automatic cold upsetter MМ1207 manufactured by Nedschroef (Belguim).
Item max diameter - 26 mm, max size of hexagonal screw nut - 22 mm, max size of square screw nut - 18 mm, max force 2200 KN, capacity – 125-200 blows per minute.
1990 YOM
The upsetter has been stored in a heated warehouse.
6-coordinate upsetter ММ 1207, disposing an option of cutting the item from work piece, exploited 1991 – 2005.
Estimated running outcome 1 300 000 working blows.
The upsetter was serviced in accordance with uniform system of preventive maintenance.
The upsetter is in working condition, comlete, assembled under supervision of Belgian specialists.
Physical deprecation 15%.
Dismantlement and loading would be realized by the specialists who have been served the upsetter and at the expense of the Seller.
It is necessary that technical specialists of the Buyer are present during dismantlement to receive important recommendations and advices concerning serving the machine.
There are some spare parts, tools purchased from the manufacturer during exploitation period of the machine – for additional payment.
3. Washing drying screw type machine ОМ 5411 purposed for washing, rinsing and drying of small items like screws, screw nuts, washers, etc. Manufactured by Kovylkino plant.
Throughput machine may be used in automated lines.
YOM 2002.
Capacity 500-2000 kg per hour.
Washing method – jet-stream, cleaning agent – aqueous-alkaline solution.
Cleaning medium temperature- 60-70 С0
Washing bath - 1,5 cub.mts.
Drying – hot air blow-off
Drying temperature -60-120 С0
Heat-carrying agent – steam, electricity.
Ref. 7131
TMP KB8040 Mechanical Hot Forging Press
complete Hot Forging Line with a 1000 Ton Hot Mechanical Forging Press include the following:
• Automatic Material Feed System to Furnace.
• Sigma 60 Gas fired Automatic Continuous Furnace. Capacity = 5500/lbs/hour. Recently Relined.
• Sigma Hot Bar Shear, Capacity Square = 4", round 4 ¼ "
• 1000 Ton TMP (Russia) Model KB8040 Mechanical Hot Forging Press, (new in 1993) Specifications attached.
• 150 Ton Mechanical Trim Press
The TMP 1000 Ton forging Press and the Furnace with Hot Blanking Shear were purchased new in 1993 and installed in 1995. The TMP Forging Press was updated with new PLC control (technology) in 2002.
The Forging line was producing 6,700 pieces of 1 ½" pip elbows per 11 hours.
TMP 1000 TON MECHANICAL HOT FORGING PRESS,
MODEL KB8040
SPECIFICATIONS:
Rated Capacity Metric Tons 1000
Slide Stroke 250 mm
Minimum Enclosed Die Space 560 mm
Die Space Adjustment 20 mm
Strokes Per Minute 90
Slide (ram) Dimensions mm 720 x 720
Table Dimensions mm 990 x 770
Top Knockout Stroke 20 mm
Bottom Knockout Stroke 40 mm
Press Length 4350 mm
Press Weight 3500 mm
Total Height Above Floor 5145 mm
Main Electric Motor 55 KW
Weight Metric tons 65.2
Ref. No.7134
Hot Forging Press NKMZ K8548 6300T
Hot Forging Press NKMZ K8548 6300T
Nominal force: 6300 ton
Number of continous strokes per minute: 40
Ram stroke: 460 mm
Distance between ram and table (table is in upper position): 1150 mm
Table adjustment: 15 mm
Distance between press columns: 1950 mm
Ram dimensions:
-front to back: 1680 mm
-left to right: 1680 mm
Table dimensions:
-front to back: 1950 mm
-left to right: 1920 mm
Mechanical upper ejector:
-maximum stroke: 100 mm
-number of positions: 1
-steps of stroke adjustment: 25-30-75 mm
-force: 30 ton
Pneumatic lower ejector:
-maximum stroke: 300 mm
-stepless stroke adjustment: 15-300 mm
-number of positions: 3
-force: 65 ton
Side windows dimensions:
-width: 1100 mm
-height: 1280 mm
Main motor: 400/590 kW/rpm
Press layout dimensions: 6300x8965 mm
Total height: 11125 mm
Height above floor level: 9150 mm
Total weight: 626100 kg
New in: 1969
Ref. No.71325
STANKO BG1334 Hydraulic Press For Scrap Packaging
Hydraulic Press For Scrap Packaging
STANKO BG1334
Year of manufacture 1990
Capacity, ton 250
Dimensions of the trough, mm 1750 x 1400 x 1250
Package dimensions, mm 360 x 360 x 800
Weight of the package, kg 200
Max. sheet thickness, mm 4
Durability of the cycle, s 65
Total power required, kW 146
Machine dimensions, mm 9150 x 7250 x 6400
Machine weight, kg 70000
Ref. 71342
