LOWEY 1000 TONS FOUR COLUMN PUSH DOWN HYDRAULIC FORGING PRESS - TOTAL POWER SUPPLY : 821.25 KW
1000 Tons Four Column Push Down Hydraulic Forging Press (LOWEY) Used
Technical Specification :
Nominal Force (Static working pressure of 210 bar) : 10 MN (1000 Tons)
Maximum pressure stroke : 800 mm
Press daylight : 2200 mm
Distance between columns (clearing width) : 800 mm x 800 mm
Number of pull back cylinders : 2
Forging tolerance measures on hot work piece : + 1 mm
Lower Bolster area : 1100 mm x 1100 mm
Press speed : Forging Speed at 1000 Tons : 0.70 mm/sec,
Advance Speed : 0.20 mm/sec, Return Speed : 0-250 mm/sec
Pressure force : - Forging at 210 bar : 10 MN (1000 TONS),
Return at 210 bar : 10 MN (100 TONS), Top Die Clamping at 10 bar : 3 tons
Hydraulic Pumps : 4 Sets x Axial Piston Pump, Pressure rate 400 bar, Working Pressure 210 bar, Total flow 2300 l/min
Electric main motors : 2 sets x 400 kw, 6p, 380 volt, IP22, F Class, Double end shaft
Total electric power supply :
2 sets x main motors : 800 kw. 380 volts, 1200 rpm
1 set x pilot motor : 11.25 kw, 380 volts, 1800 rpm
2 set x oil heater : 10 kw, 380 volt
Total Power Supply : 821.25 kw
Ref. 5513151
LOWEY 800 TONS FOUR COLUMN PUSH DOWN HYDRAULIC FORGING PRESS - MAXIMUM PRESSURE STROKE : 1500 MM
800 Tons Four Column Push Down Hydraulic Forging Press (LOWEY) Used
Nominal Force (Static working pressure of 210 bar) : 8 MN (800 Tons)
Maximum pressure stroke : 1500 mm
Press daylight : 2000 mm
Distance between columns (clearing width) : 1500 mm x 1500 mm
Number of pull back cylinders : 2
Forging tolerance measures on hot work piece : + 1 mm
Lower Bolster area : 1500 mm x 1500 mm
Press speed : Forging Speed at 800 Tons : 0.65 mm/sec,
Advance Speed : 0.250 mm/sec, Return Speed : 0-250 mm/sec
Pressure force : - Forging at 280 bar : 80 MN (800 TONS),
Return at 210 bar : 1.0 MN (100 TONS), Top Die Clamping at 10 bar : 3 tons
Hydraulic Pumps : 2Sets x Axial Piston Pump, Pressure rate 400 bar, Working Pressure 280 bar, Total flow 1150 l/min
Electric main motors : 1 set x 530 kw, 6p, 380 volt, IP22, F Class, Double end shaft
Total electric power supply :
2 sets x main motors : 530 kw. 380 volts, 1200 rpm
1 set x pilot motor : 11.25 kw, 380 volts, 1800 rpm
2 set x oil heater : 10 kw, 380 volt
Total Power Supply : 551.25 kw
Ref. 513152
MECHANICAL HOT FORGING PRESS
MECHANICAL HOT FORGING PRESS
Ensuring flexible, forming motion driven by servo control.
BKO hydraulic servo
AC servo motor attached
4 process transfer device attached
Servo motor 550kw 5t-m * 4 units
Motion Eccentric, link, hydraulic
Molding temperature from room temperature (cold) ~ Fe hot (1300 degrees)
Maker Sumitomo
Year 2006
Power 5000 ton
Model FPS-5000
Stroke 400mm
Speed 40spm
Shut height 1300mm
Slide Adjustment 8mm
Maximum working count tpm
Weight of die folders and molds .5 tons (Accessories included)
Maximum tripping 9
Point 2
Crankshaft rotation direction forward and backward
Crank eccentric weight 14.8 tons
Cone loaded weight reciprocating weight -9.5tons
rotating weight-6tons
Crank height from the floor reference point FL +4496 mm
Crank rotator GD2 66100kgm2
E 14800kgm2
Angle of brake in Control the angle of the motor regenerative 36 ℃ (when spm40)
the mechanical brake slip angle 27 ℃ (when spm40)
Slide motion crank motion
Installation height (underside of bed) FL-1000mm
Slide weight 65 tons
Total weight 450 tons
Ref. 513153
LASCO KH 630 FORGING HAMMER
1 Forging hammer Lasco KH 630
TECHNICAL DATA
Energy of blow 6300 Kg.m
Height of blow 1300 mm
Height of dies 400 mm
Weight of falling ram 4850 Kg
Way between uprights 825 mm
Motor 75 Kw
Weight of anvil 70 t.
Total weight of hammer 110 t.
Height over the floor 6300 mm
Total height of hammer 8160 mm
Max. weight of dies 1050 kg
Ref. 513167
