SMERAL LZK 1600 TONS TRIMMING PRESS
Trimming Press Smeral 1600 Ton Lzk
Rated Capacity 1600 Ton
Light Between Columns 1230 Mm
Vertical Light 770 Mm
Slide Ram 280 Mm
Stroke Per Minute 85
Size Table 1180x1120 Mm
Size Ram 1000x920 Mm
Adjustment Ram 10 Mm
Size Belts 32x8500 Mm
Max Stroke Superior Extractor 30 Mm
Max Stroke Inferior Extractor 40 Mm
Motor Power 85 Kw
Total Weight 90 Ton
Ref.513139
SMERAL LHK 800 TON 4’’ UPSETTER
UPSETTER SMERAL LHK 800 TON 4’’
Power 800 ton
The maximum section of mold material 100 mm
The run of the main upsetter 380 mm
Quantity of hit for minute 35
The run of the main upsetter 250 mm
The run back of the main uPsetter with the molding closed 125 mm
The run of the auxiliary of the parts which keep the piece swagged 159 mm
Dimension of the mold/length x width x height 550x210x660mm
Power of the electric motor for minute 45 Kw
Quantity of tour of the electrical motor for minute 720
TECHNICAL DATA
Type of machinery upsetter horizontal
Type LHK 800
Producer house Smoralovg Brno
Classification number TPE 2986- 20- 56
Machinery number 7128
Total length 5350 mm
Total width 3600 mm
Total height 3060 mm
Total weight 81.000 kg
The dimensions of caissons:
The electric tension of work of the electric motors 380V
Width 1700, 2050 , 1650, 2930, 1342mm
Height: 1615, 1970 , 1145, 2725, 1657mm
Length: 2350, 4000, 3000, 4980, 3342mm
The machinery is useful for the swaging and the pices swagged from the barrels into one
operation/passage or into more operations/passages
Nominal power of the upsetter 800ton
Maximum power of the traversal upsetter with the closed semimolding 800ton
The maximum diameter of the piece 100mm
The run ogf the mobile semimolding 180mm
Thr run of the upsetter 380mm
The run of the upsetter after the close of the mold 250mm
Quantity of the hits – 38/minute
The run of the upsetter (with the mold closed) during the back 130mm
Maximum dimensions of the mold:
- Length 590mm
- Height 660 mm
- Width 220mm
Maximum section of the material 130mm
External dimensions of the apsetter:
Length 6920 mm
Width 3920 mm
Height 3490mm
Height above pavement 2850mm
Weight of the upsetter with fixing elements from fondation 81000 kg
Chief of system- elettropneumatical
Type of clutch – pneumatical
Mechanism for the charge of the price – table
Manner of work- continuous or only an operation
Dimensions of the seat for the blocks for the piece:
Width - 200mm
Height- 680 mm
Length – 740 mm
Dimensions of the working area:
Width - 850 mm
Ref. 513140
5000 KG FORGING HAMMER
Weight of the falling parts 5000 kg
Blow energy, 12.500 kgf.m
Max no. of ram strokes per minute 50
Ram travel 1300 mm
Distance between columns 800 mm.
Ram dimensions from front to back 950 mm
Die support dimensions fron front to back 1180 mm
Min. Distance between the ram and the die support 400 mm
Air(steam) pressure 7-9 kgf/cmp
Overall Dimensions:
-length 3700 mm
-width 2000 mm
-height from the ground 8770 mm
Anvil weight, (aprox.) 100.000 kg
Total weight of the hammer (aprox.) 140.000 kg
Ref. 513141
DDS 20 TON / 40 MT RAIL BOUND FORGING MANIPULATOR (DDS)
20 TON / 40 MT RAIL BOUND FORGING MANIPULATOR (DDS) USED
Technical Speciation
Manufacturers : DDS
Nominal carrying capacity : 20 Metric Tons
Tongs claming : 40 meter tons
Tong opening w/o inserts : 430 – 1,180 mm rounds
Tongs ctr heights above rails : 1200 – 1950 mm
Vertical stroke of tongs : 750 mm
Vertical tilting angle of tongs : + 60
Horizontal side shift of tongs : 200 mm
Distance between the rails : 3500 mm
Net weight (approx) ; 200 tons
Ref. 513150
