ERFURT PKXW 2500 TONS FORGING PRESS
ERFURT PKXW 2500 TONS FORGING PRESS
FORGING PRESS PKXW 2500 To ERFURT
YOM - 1964, Made in: Germany, Forming sections: 4, Press capacity: 2500 ToF, Stroke of ram: 400 mm, Distance between ram and table: 900 mm, Stroke for eject the piece: 50 mm on ram/40 mm on table, Opening between columns: 1250 mm, Area of machine: 4200 x 4600 mm, Height of machine: 7800 mm, Max outer diameter of piece: 245 mm, Max. weight of piece: 14 kg, Stroke: 65/min, Main motor power: 125 KW, Weight: 180 To
Ref. 51356
SKODA WD 250 BORING MILL FLOOR
Boring mill floor type SKODA
model WD 250
Year of manufacture: 1966
Technical details :
Spindle diameter 250mm
Bed height 600mm
Bed width 2400mm
X travel 5000mm
Y travel 4000mm
Dimensions 12500 x 6000 x 9200mm
Machine weight 105000 kg
Skip feed 1200 mm/min
Ref. 513101
Ajax 5” UPSETTER-, National 5” UPSETTER
FORGING
1
Upsetter Ajax 5”
Upsetting power1000 t
Usable upsetting stroke 394 mm
Strokes min^-130 min^-1
Die space 762 mm
Die height737 mm
Die thickness203 mm
Opening of clamping jaws178 mm
Ouverture des mâchoires de serrage
Dimensions mm (L x W x D) 5200 x 3500 x 3000 mm
Approximative weight 85 t
Driving power44 kW
Mode of operation mechanical
2
Upsetter Ajax 5”
Upsetting power 1000 t
Usable upsetting stroke 394 mm
Strokes min^-1 30 min^-1
Die space 762 mm
Die height 737 mm
Die thickness 203 mm
Opening of clamping jaws178 mm
Dimensions mm (L x W x D) 5300 x 3500 x 3000 mm
Approximative weight85,7 t
Driving power44 kW
Mode of operation mechanical
3
Upsetter National 5”
Upsetting power1000 t
Usable upsetting stroke381 mm
Strokes 30 min^-1
Opening of clamping jaws206 mm
Support57 mm
Floor space 3550 x 5200 mm
Weight approx. 82 t
Mode of operation mechanical
4
Upsetter Ajax 6”
Upsetting power1300 t
Stroke457 mm
Strokes min^-1 27 min^-1
Dimensions of die 914 x 660 mm
Clamping height 279 mm
Tool and die space838 mm
Opening of clamping jaws203 mm
Driving power 55 kW
Weight135 t
Ref. 513102
HYDRAULIC FORGING PRESS - 120 KW
HYDRAULIC FORGING PRESS - 120 KW
Installed power output: 120 kW
Main engine output: 37 kW
Working fluids:
Water (high pressure circuit 25 Mpa)
Hydraulic oil (low pressure circuit 10 Mpa): 1800
Lubrication fats: 100 kg
Lubrication oil: 200 l
Nitrogen: 50 l, 150 bar
Cooling water: 7,2 m3/h, max. 30°C
Pressure air: 0,6 Mpa
Control systém: SIMATIC S7 with HNC 100 regulator
Max. pressing force: 26,4 MN
Pressing speeds
1st step (33% force) 148 mm/s
2nd step (66% force) 81 mm/s
3rd step (100% force) 52 mm/s
Ref. 5513136
