Lindemann 2500 Tons Direct Extrusion Press with Piercer
2500 T Direct Extrusion Press with Piercer
Extrusion press
Manufacturer Lindemann
Type direct / piercer / 4 tie rods
Year of Manufacture 1961
Extrusion force 25 MN (2500 Mton)
Billet Ø 218 mm
Ø 292 mm
Container Ø 225 mm
Ø 300 mm
Container length 1.000mm
Die changer cassette
Hydraulic pumps 3 x Oilgear PVV 540
Main drives 3 x 200 kW
Electrical control Siemens S7
Oil tank content 10.000 ltr HLP 68
Modernizations: 2004 complete hydraulic (Oilgear) and electric (Siemens S7)
Dead cycle time 21 sec.
Billet heater Induction
Manufacturer BBC
Type OPC 24 L
Year 1961
Billet length 830 mm
Note: 2008 electrical control was replaced by new one, make IAS
Run-out system
Manufacturer Lein Unterschütz
Year 1961 2007
Run-out length 25 m
Hot saw + Single Puller
Manufacturer Unterschütz
Type flying
Year New 2007
Stretcher
Manufacturer Lindemann
Type M 16
Year 1961
Force 100 ton
Finishing saw
Manufacturer Haginger
Type Under table
Year 1989
Note New control
Spare parts
Container Ø 225 mm 3 pcs.
Container Ø 300 mm 2 pcs.
Induction spool Ø 225 mm 2 pcs.
Induction spool Ø 300 mm 2 pcs.
Ref. CGS91310
IDRA mod. 1300 ST Die Casting Machine
IDRA mod. 1300 ST Die Casting Machine
MANUFACTURING YEAR: 1999
LAST OVERHAULING: 2002
DISTANCE BETWEEN COLUMNS: 1100 x 1100 mm
CLAMPING FORCE: 14700 KN
PLC SIEMENS S5 + video Simatic Panel PC
ACCESSORIES:
• LOADER ITALPRESSE
• ROBOT SPRAYER KAWASAKI FS30L (year 2002)
• EXTRACTION ROBOT KAWASAKI FS60 (year 2002)
• 50 t. TRIMMING PRESS
Ref. CGS91312
SMS – Schloemann Extrusion Press Direct 2600 US T With Piercer
SMS – Schloemann extrusion press
Mfc.: SMS – Schloemann
Type: direct 2600 US T with piercer
Built: 1969
Modernised: 1990 – new oil hydraulic system
1998 – new cross fitted
2000 – new billet heater & PLC system (Allen Bradley)
Working pressure: 4500 Psi (315 atms)
Power of main ram: 2325 US Tons
Power of advance rams: 275 US Tons
Total power: 2600 US Tons
Stem pullback force: 135 US Tons
Stem stroke: 1800 mm
Extrusion stem speed during direct pump drive, infinitely variable up to: 31.5 m/sec.
Extrusion stem speed during accumulator operation, infinitely variable up to: 155 m/sec.
Max. billet length: 710 mm
Billet dia.: 8 inches
Max. dummy block height: 100 mm
Container sealing force: 200 MT
Contaner pullback force: 280 MT
Container length: 800 mm
Container bore range: 178 – 250 mm
Piercing force: 315 MT
Piercer pullback force: 125 MT
Mandrel stroke: 800 mm
Driving power of saw: 22 kW
Cutting speed: 100 m/sec.
Feed speed of saw, infinitely variable up to: 150 mm/sec.
Consist of: Schloemann 2600 US Ton horizontal extrusion presws incl. internal piercer
Discard saw Oil hydraulic system Billet storage table
Billet heater feed conveyor Twin induction billet heaters
Billet loading system Discard & tooling conveyor
Under water extrusion system with heat exchanger
40 m run-out-table PLC 5 touch screen (Allen Bradley)
Electrical Control Cabinets
Ref. CGS91320
Smeral 1000T Forging Press - Stroking Rate 100 Str./Min
Smeral 1000T Forging Press - Stroking Rate 100 Str./Min
FORGING PRESS SMERAL 1000T
TECHNICAL DATA
Capacity 1000t.
Stroke of the ram 220mm
Max. distance table/ram 800mm
Stroking rate 100 str./min
Table area 1000x950mm
Dimensions: length 2530mm
width 2300mm
height 5450mm
Weight of the press ar. 42t.
Ref. CGS91321
