VORONEZH AKKG 8040 1000t Hot forging press - Year: 1987
Hot forging press VORONEZH AKKG 8040 1000t
Year: 1987
Condition: 100 complete, already dismantled, ready for quick dispatch.
Please take a look at stroke of this machine. It is a special one, heavy duty edition.
It has a long stroke and so it is suitable for producing of spindle shafts and gear shafts.
Tech data:
Maximum force ton-force 1000
Slider stroke length mm 380
Slider strokes per minute 40
Maximum distance between table and slider (in lower position of slider) mm 710
Adjustment of distance between a table and slider mm 10
Table overall dimensions: mm
- from left to right 930
- from front to rear 1000
Slider overall dimensions: mm
- from left to right 780
- from front to rear 1000
Bottom ejector
- stroke 280
- force kN 10
Main electric motor power kW 100
Press overall dimensions mm
- length 4880
- width 3920
- height 5860
Press weight kg 90 000
Ref. CGS81345
SMS – Schloemann Direct 2600 US T With Piercer
SMS – Schloemann Direct 2600 US T With Piercer
1 Second-hand extrusion press
Mfc.: SMS – Schloemann Type: direct 2600 US T with piercer Built: 1969
Modernised: 1990 – new oil hydraulic system 1998 – new cross fitted
2000 – new billet heater & PLC system (Allen Bradley)
Working pressure: 4500 Psi (315 atms) Power of main ram: 2325 US Tons
Power of advance rams: 275 US Tons Total power: 2600 US Tons
Stem pullback force: 135 US Tons Stem stroke: 1800 mm
Extrusion stem speed during direct pump drive, infinitely variable up to: 31.5 m/sec.
Extrusion stem speed during accumulator operation, infinitely variable up to: 155 m/sec.
Max. billet length: 710 mm Billet dia.: 8 inches
Max. dummy block height: 100 mm Container sealing force: 200 MT
Contaner pullback force: 280 MT Container length: 800 mm
Container bore range: 178 – 250 mm Piercing force: 315 MT
Piercer pullback force: 125 MT Mandrel stroke: 800 mm
Driving power of saw: 22 kW Cutting speed: 100 m/sec.
Feed speed of saw, infinitely variable up to: 150 mm/sec.
Consist of: Schloemann 2600 US Ton horizontal extrusion presws incl. internal piercer
Discard saw Oil hydraulic system Billet storage table
Billet heater feed conveyor Twin induction billet heaters
Billet loading system Discard & tooling conveyor
Under water extrusion system with heat exchanger
40 m run-out-table PLC 5 touch screen (Allen Bradley)
Electrical Control Cabinets
Ref. CGS81346
Strangpressanlage 2350 Tons
Strangpressanlage 2350 Tons
2350 t Strangpressanlage
Consisting off:
Log Heater Elhaus, year 1996, capacity approx. 4,3 ton/hour, with chain conveyor ,
1 pre-heating and 3 heating zones, modernization of gas control in 2004.
Log magazine, Elhaus, year 1996, log length up to 7000mm
Formats Ø 228, Ø 178,(flat-oval billets 160 x 332 mm, not complete - upper guide rolls are missing).
Hot shear Elhaus, year1996, changing sets for 3 formats
Blillet loader, Haginger, year 1991, modernization ( cylinder with measure system, 1999 ).
2350 Mton Extrusion Press, make Haginger, year 1991
- 4 tie rods
- Billets formats: Ø 228, Ø 178, flat-oval billets 162 x 334, in total 6 containers,
- Oilgear hydraulic, 3 Oilgear-main-pumps (1 x PVL + 2 x PVV) , 3 x 200 kW)
- Operational pressure: 285 bar
- Oil cooler, capacity 1200 kW
- oil tank 14000 litre
- PLC S7 press control, , new main cylinder and plunger in 2004,
- tool package: D 500 x 500,
- 6 press stems.
Run-out system
- Profile cooling by air fans / water
- Hot saw Elhaus, year 1996
- Single puller Elhaus, year 1996
- slat conveyor, Haginger, year 1991 with axial fans (2009).
- Cooling table 42.000 mm, belt distance 1200 mm, year 1991
- Cooling triangle with axial fans under cooling table, 3 rows of fans
- 90 ton Stretcher, Haginger, with Elhaus toongs,
- staorage table, Haginger, year 1991
- saw roller table, width 1000 mm, Haginger, year 1991, PU coat renewed in 2008
- Under-table finishing saw, make Kopischke, saw blade dia. 800 mm, year 1993, suction 4 kW, PLC Siemens S7
- Saw table, Kopischke, ca. 13.500 mm long, year 1993
- Saw measure bedstop, Haginger, ca. 13.500 mm, year 1991
- Container pre-heating furnace, Haginger, year 1991
- Spare Parts, e.g. 1 main hydraulic pump, misc. cylinder, valves
Ref. CGS9138
TMP Voronezh 1000 tons Hot Forging Mechanical Press
Hot Forging Mechanical Press, capacity 1000 tons, “TMP Voronezh, Russia”
Performance specification:
Capacity – 1000 tons
Slide stroke – 360 mm
No of slide strokes - 30 st/min
Shut height of stamp distance – 710 mm
Table height adjustment - 20 mm
Table size - 940 x 1200 mm
Ram size - 800 x 1100 mm
Lower ejector:
Max stroke - 275 mm
Ref. CGS9139
