Voronezh 4,000 Ton Hi-Duty Heavy Frame Dual Pitman Mechanical Forging Press
4,000 ton Voronezh Hi-Duty Heavy Frame Dual Pitman Mechanical Forging Press
Manufacturer: Voronezh
Model: KB8546
Rated forge tonnage: 4,000 metric tons
Ram stroke: 400mm
Strokes per minute: 50 spm
Shut height: 1,000mm
Upper KO stroke/force: 65mm / 8 tons
Upper KO stroke/force: 65mm / 12.5 tons
Bed L-R x F-B: 1,710 x 1,620mm
Ram L-R x F-B: 1,420 x 1,420mm
Clear distance btwn uprights: 1,770mm
Net weight: 361,000 kgs (795,644 lbs)
This machine is equipped with dual pitmans, slide adjustment and oil lubrication system.
It is powered by a 160kW (215hp) main motor drive.
New in the late 1980's, this machine is in very good working conditon available for immediate inspection and delivery.
Ref. CGS101360
FICEP Mechanical Forging Friction Screw Press
300 ton FICEP Mechanical Forging Friction Screw Press
Manufacturer: FICEP
Model:
Screw dia: 150 mm
Pressure (at bottom of stroke): 225 tons
No. of strokes per 1' (full stroke): 48
Ram stroke: 375 mm
Distance between columns: 420 mm
This press is in very good condition and may be demonstrated in operation
Ref. CGS101361
COMPLETE COATED BOARD MILL
1. Stock preparation
• Pulpers
1 Discontinuous high density pulper (15%) - 15 cubic meters capacity – normally used for the bottom layer
1 Continuous low density pulper (4%) - 23 cubic meters capacity – normally used for the top layer
1 Continuous low density pulper (4%) - 17 cubic meters capacity – normally used for mechanical pulp
1 Continuous low density pulper (4%) – Kadant, 30 cubic meters capacity – normally used for waste paper- With Ragger, Junk trap, Hydrapurge, Trommel and reject press (year 2008) – 360 T/day
1 Continuous low density pulper (4%) - Black Clawson, 30 cubic meters capacity – normally used for waste paper in stand by
2. Screening
• Coarse Screen
1 Kadant line with high density cleaner, Holes Screen UVK500 (1,6 mm), Float Purge, trommel and reject press. 550 t/day waste paper (year 2010)
• Fine Screen
Four stages of slots (0,2 mm) screens. 380 T/day waste paper (medium density)
After coarse screen and hot shredder, two stages of slots (0,2 mm) screens. 100 T/day for the top layer treatment (medium density)
Two stages of slots (0,2 mm) screens. Before the board machine 3 head boxes for the under top and the bottom layers
3. Board Machine 3
Maule - Voith - Valmet
Year of construction: 1992
Production:
Coated paper board – 270 to 600 gr/m²
4 Layers (Top, Under Top, Middle, Bottom)
3 Coaters ( Bent Blade and Rod for the Top and Rod for the Bottom)
13,5 ton/h
Max Speed : 250 m/min
Maximum board Width : 3780 mm
Total Dryers : 42 ( Maximum Pressure: 3,5 Bar, Work Pressure: 3 Bar)
Pre Dryer Section: 24
After Dryers Section: 18
MG Cylinder: 5000 mm diameter
4. Board Machine 2
Maule – Escher Wyss
Year of construction: 1962
Production:
Uncoated or Light Coated board – 270 to 600 gr/m²
4 Layers (Top in stand-by, Under Top, Middle, Bottom)
3 Coaters ( Bent Blade in stand-by and Rod for the Top and Rod for the Bottom)
7,3 ton/h
Max Speed : 160 m/min
Maximum Board Width : 2600 mm
Total Dryers : 55 ( Maximum Pressure: 3,5 Bar, Work Pressure: 3 Bar)
Pre Dryer Section: 37
After Dryers Section: 18
MG Cylinder: 4200 mm diameter
5. Winders
De-Juliis
Year of construction: 1960 2000
Max Speed (m/min): 500 800
Maximum Board Width (mm): 3800 2600 to 3850
Core Diameter (mm) : 70 – 300 70 – 300
Number of Knives 10 27
6. Sheeters
Duplex Jagemberg Simplex Pasaban
DQSM/GL KDD 2500
Year of construction: 1967 2001
Max Speed (m/min): 180 350
Maximum Board Width (mm): 3800 2440
Sheets length (mm min/max) 600/1800 400/1600
Core Diameter (mm) : BM reel 150 – 300
Number of Knives 7 5
Duplex Jagemberg Duplex Jagemberg
DQSM/GL 2600 DQSM/GL 2600
Year of construction: 1960 1960
Max Speed (m/min): 130 130
Maximum Board Width (mm): 2670 2670
Sheets length (mm min/max) 500/1610 500/1610
Core Diameter (mm) : BM reel 150 to 300
Number of Knives 7 7
7. Packing / Packaging
The stacks are automatically polythene-wrapped and shrunk in a hot box. The wrapped stack are labeled and transported to designated location in a large store by forklift.
8. Power Station
Gas Turbine (Solar – Taurus T60)
Year of construction:1991
Power: 5,150 (MWe)
Boiler (Idrotermici – Recovery flue gas from gas turbine)
Year of construction:1991
Maximum Steam Production: 50 T/h (42 Bar)
Steam Turbine (Siemens)
Year of construction:1972
Power: 4,5 (MWe)
Ref. CGS101362
18KP Forging Hammer
18KP Forging Hammer
Forging Hammer 18KP
Energy of stroke - 25000 kg.m
Falling part weight - 10t
Number of strokes - 30
Max. stroke of ram - 1400 mm
Distance between guideways - 1000 mm
Weight of hammer without anvil - 75,5 t
Weight of anvil - 204 t
Ref. CGS101363
