HUTA ZYGMUNT MPM 1600B FORGING HAMMER
2 units of Forging Hammer Huta Zygmunt MPM 1600B
Year of production: 1980 ties and 1978
Ram stroke: 750 mm
Energy of full blow: 1840 kgm
Quantity of stroke: 120 u/min
Mass of anvil block: 12,5 t
Mass of hammer with anvil block: 21,9 t
Ref. 71239
HUTA ZYGMUNT MPM 3150B FORGING HAMMER
Mass of falling parts: 1000 kg
Ram stroke: 800 mm
Energy of full blow: 3600kgm
Quantity of stroke: 110
Mass of hammer: 35t
Year of production: 1974r.
Hammer is in excellence working condition.
Ref. 71240
SMERAL LZK4000 MECHANICAL FORGING PRESS
MODEL: LZK4000
YEAR: 1975 / INSTALLED 1981
CAPACITY: 4000.00 Ton 4000 kN
SPEED: 60 SPM Variable
RAM / SLIDE STROKE: 14.96 in. 380.00 mm.
RAM / SLIDE ADJUSTMENT: 0.59 in. 15.00 mm.
SHUT HEIGHT (RAM / SLIDE DOWN, ADJUSTMENT UP): 39.37 in. 1000.00 mm.
DISTANCE BETWEEN COLUMNS: 66.14 in. 1680.00 mm.
STROKE OF UPPER KNOCKOUT: 1.97 in. 50.00 mm.
STROKE OF LOWER KNOCKOUT: 3.15 in. 80.00 mm.
RAM / SLIDE WIDTH: 57.87 in. 1470.00 mm.
RAM / SLIDE DEPTH: 57.87 in. 1470.00 mm.
BED WIDTH: 59.84 in. 1520.00 mm.
BED DEPTH: 62.99 in. 1600.00 mm.
BOLSTER THICKNESS: NONE
ELECTRIC MOTOR POWER: 268.00 HP 200.00 Kw.
POWER 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH / 50Hz / 380V existing
SPECIAL FEATURES OR ADDITIONAL ITEMS: HEIGHT LISTED IS ABOVE FLOOR
MACHINE DIMENSIONS - Length: 189.76 in. 4820.00 mm.
Width: 185.04 in. 4700.00 mm.
Height: 301.97 in. 7670.00 mm.
CONDITION: GOOD*
*MECHANICALLY EXCELLENT. ELECTRICAL CONTROLS AND LUBRICATION SYSTEM NEED REPLACED
Ref. 712109
SMERAL LZK2500 CRANK TYPE FORGING PRESS
Model LZK2500
Year 1985
Capacity 2500 / 2750 Ton 24900/27400 kN
Speed 65 SPM CONTINOUS MODE
Ram / Slide Stroke 12.60 in. 320.00 mm.
Ram / Slide Adjustment 0.39 in. 10.00 mm.
Shut Height (Ram / Slide Down, Adjustment Up) 35.60 in. 905.00 mm.
Stroke Of Upper Knockout 2.00 in. 50.00 mm.
Stroke Of Lower Knockout 2.80 in. 70.00 mm.
Ram / Slide Width 52.00 in. 1320.00 mm.
Ram / Slide Depth 43.00 in. 1100.00 mm.
Bed Width 53.00 in. 1340.00 mm.
Bed Depth 55.00 in. 1400.00 mm.
Power existing
Additional 28 STROKES PER MINUTE IN MANUAL MODE, HEIGHT SHOWN IS ABOVE FLOOR, TOTAL HEIGHT IS 291 in ( 7390 mm), NEW QUICK CHANGE HYDRAULIC TYPE BOLSTER
Machine Length 160.00 in. 4055.00 mm.
Machine Width 157.00 in. 4000.00 mm.
Machine Height 264.00 in. 6710.00 mm.
Weight 320000 lbs. 145455 Kg.
Condition EXCELLENT
Ref. 712110
