LASCO VPE1000 HYDRAULIC FORGING PRESS
Specifications:
• Press Force (infinitely adjustable): 1125 Ton
• Plunger Range: 31.5"
• Table Size: 48.4" x 47.2"
• Pressing Speed: 161 IPM
• Press Cycles: Less than 250,000
•
Equipped With:
• (2) 177.0HP Press Drives
• Ejector (Integrated in the table)
Approximate Overall Dimensions:
• 0"x 0"x 0"
Approximate Weight:
• 0 Lbs.
• As Is, Where Is,
•
Year:
• Year (New 2002)
• Preliminary Specifications Subject to Verification
Ref. 712123
WAGNER RAW 80/50-2000/315 RING ROLLING MACHINE
Outer ring diameter max max. 2000 mm.
Outer ring diameter min. min. 320 mm
Ring height max. 315 mm
Ring height min. 40 mm
Ring blank diameter max. 650 mm
Radial force max. 80 t
Axial force max. 50 t
Stroke radial 800 mm
Stroke axial hydraulic/mechanical 50/275 mm
Rolling speed 1,25 m/s.
Nominal capacity radial drive 160 kW
Nominal capacity axial drive 63 kW
Ref. 81253
LASCO KFP 1250 COLD FORGING PRESS
Press capacity 1250 t
Stroke 1250 mm
Retracting force 130 t
Ejector stroke 600 mm
Force of ejector 100 t
Shut height 2400 mm
Table size (left to right) 1500 mm
Table size (front to back) 1380 mm
Ram size (left to right) 1400 mm
Ram size (front to back) 1380 mm
Dimensions of the press mm (wxdxh) 3450 x 2470 x 9900 mm
Height of the press above floor6800 mm
Mode of operation oil hydraulic
Ref. 81297
WILLIAMS & WHITE / SIEMPELKAMP DOWNACTING HYDRAULIC PRESS
A)
3 X 7860 Ton Siempelkamp Downacting Hydraulic Presses New: 2000
Serial Numbers: 171.1 / 171.2 / 171.3
Press Force: 7,860 US Ton (70,000 kN)
Stroke: 39.37" (1000 mm)
Daylight Opening: 78.74" (2000 mm)
Overall Length of Bed: 216" (5.486 meters)
Overall Length of Ram: 141" (3.581 meters)
Pressing Area: 137.9"LR x 78.74" (3500 mm x 2000 mm)
Tool Weight: Upper - 3235 Ton (30,000 kg)
Tool Weight: Lower - 6470 Ton (60,000 kg)
Pressing Speeds: Approach: 840 IPM (350 mm/s)
Working Speed Maximum: 96 IPM (40 mm/s)
Return Speed: 400 IPM (164 mm/s)
Window Opening: 139.76" (3500 mm) LR x 80.70" (2050 mm) FB
Equipped With:
Rolling Bolster Plates Through Windows
Hydraulic Units - Rexroth Top Mounted (4) Main 200 HP Motors - 4700 Gallon Cap.
Electrical Power - 460V/60Hz
Material Tooling Transfer System
Overall Height Above Floor: 283.5" (7200 mm)
Approximate Weight: 520 Ton
Note: Hydroforming Intensifier and Pumps Available at additional cost !!!!
PHOTOS WERE WHEN PRESSES WERE LAST IN SERVICE !!!!!
Condition: Very Good - Reported to have only 500 hours use.
Currently dismantled and ready to load !!!!!
B)
5000 Ton Williams & White 4 Post Downacting Hydraulic Press
New: 1997
Serial Number: C-4745
Capacity: 5000 Ton Pressing @ 4097 PSI
400 Ton (Stripping)
30 Ton Net Lift @ Fast Open
Stroke: 72"
Daylight: 112" (over Bolster)
Shut Height: 40"
Bed Area: 200" LR x 96" FB
Slide Area: 200"LR x 96"FB
Distance Between Columns: 202"
Distance Floor - Top of Bolster: 20"
Speeds: 800 IPM Advance
25 - 275 IPM Intermediate Pressing (to 1000 Ton)
6 - 60 IPM Pressing
30 - 200 Stripping
800 IPM Rapid Return
Equipped With:
Hydraulics:
Top Mounted
(2) 35" Diameter Main Cylinders / Single Acting
(2) 18-1/8" x 15" Diameter Kicker Cylinders / Double Acting
Floor Level Fill / Drain / Oil Level Sight Temp Gauges
(4) Oil Gear Axial Piston #PVV540 Primary Pumps
Denison Vane Auxilary Pumps
Intensifier for Hydroforming
Electrics:
Allen-Bradley PLC-5/40 Series Processor w/ Allen-Bradley Panelview Color Touch
Screen for Operator Interface w/ Minimum of 25% Spare I/O Capacity
Memory for Part Storage / Fault Monitoring / Temposonics
250 HP Main Motor / 1200 RPM
Trabon Automatic Lubrication System
Approx. Overall Dims.: 250" L-R x 156" F-B at floor / 250" L-R x 278" F-B at crown
Approximate Height Above Floor: 408" / Approx. Depth Below Floor: 90"
Estimated Total Weight: 838,000 Lbs.
PHOTOS WERE WHEN PRESS WAS LAST IN SERVICE !!!!!
We purchased this press from General Motors, Pontiac, Michigan Plant. They were using it for Hydroforming. We have moved it into our Ferndale, Michigan storage warehouse. It is offer loaded on buyers carriers, for immediate delivery.
All specifications are subject to verification by buyer.
C)
3500 Ton Williams & White 4 Post Downacting Hydraulic Press
New: 1998
serial# C-4755
Bed Size: 177" x 120"
Daylight: 86"
Shut Height: 34"
Stroke: 52"
D)
3000 Ton Williams & White 4 Post Downacting Hydraulic Press
New: 1998
serial# C-4801
Bed Size: 180" x 120"
Daylight: 99"
Shut Height: 45"
Stroke: 54"
E)
2000 Ton Williams & White 4 Post Downacting Hydraulic Press
New: 1998
serial# C-4780
Bed Size: 150" x 90"
Daylight: 91.75"
Shut Height: 49.75"
Stroke: 42"
Ref. 812102
