OPEN DIE FORGING EQUIPMENT LIST
Main Facilities
OPEN DIE FORGING PRESS
3 Nos 3,000 Ton
1 Nos 3,500 Ton
2 Nos 5,000 Ton (2009)
1 Nos 6,000 Ton
1 Nos 15,000 Ton (2009)
RING ROLLING MILL
1 Nos φ4,000 ⅹ 630H (SMS)
1 Nos φ5,500 ⅹ 1,000 H
1 Nos φ7,500 ⅹ 2,500 H (SMS)(2009)
MANIPULATOR
1 Nos 30/60M-Ton
1 Nos 80/160M-Ton
1 Nos 160/400M-Ton(2009)
HEATING FURNACE
8 Nos 200 Ton CAR TYPE
5 Nos 250 Ton CAR TYPE
18 Nos 50 Ton BATH TYPE
HEAT TREATMENT FURNACE
12 Nos 250 Ton CAR TYPE
2 Nos 300 Ton CAR TYPE
CNC MACHINE
18 Nos CNC DMBC/DMBL
QUENCHING BATH(W x H x L)
1 Nos OIL – 4,500 ⅹ 2,500 ⅹ 10,050
1 Nos WATER – 8,500 ⅹ 2,500 ⅹ 19,500
Product Dimension (1`st)
Shaft : weight 65 Ton / length 24 M
Disc : max OD φ5,000 / Weight 56 Ton
Ring : max OD φ5,500 / Weight 15 Ton
Shell : max OD φ4,500 / Weight 56 Ton
Engine : model : max K98MC / RT96
Product Dimension (1`st)
Shaft : weight 130 Ton / length 24 M
Disc : max OD 6,500 / Weight 130 Ton
Ring : max OD φ7,500 / Weight 50 Ton
Shell : max OD φ6,000 / Weight 130 Ton
Engine : model : max K98MC / RT96
Ref. 812103
SMERAL LKM 4000 TONS VERTICAL CLOSED-DIE FORGING PRESS
New 1968
`
SPECIFICATIONS:
Maximum pressure at the end of the course: 4000t
Stroke of the slide: 400 mm
Number of slide stroke:50 strokes / min
Maximum distance from the slide table: 1400 mm
Passage between the pillars under the bed rails slide:1500 mm
Slide dimensions: 1320 x 1320 mm
Table size:01120 x 1600 mm
Moving table height: 20 mm
Maximum pressure of the upper pusher: 20 tons
Maximum stroke of top pusher: 65 mm
Maximum pressure of the lower ejector: 40 tons
Maximum stroke of the lower ejector: 80 mm
Main motor power: 225 kW
Number of revolutions of the main motor: 730 rev / min
DIMENSIONS:
Total width of the press: 6280 mm
Overall depth of the press: 4885 mm
Total height of the press: 8870 mm
Press height above foundation: 7315 mm
The total weight of the press: 280 092 kg
Ref. 91232
KURIMOTO F-2500 FORGING PRESS
New 1977
SPECIFICATIONS:
Effort, ie at a distance of 8 mm in front of N.V.T: 2500
Length of the ram stroke: 320 mm
Number of strokes per minute: 35
Number of strokes per minute: 20
Height stamp space, mm: 890 mm
(Distance from the bottom of the stamp
descended to the upper surface of the table)
Adjustable height stamp size space: 16 mm
Table area (W x D): 1250 mm x 1400 mm
Stamp area (width x length): 1100 mm x 1150 mm
Distance between side frames: 1350 mm
Force and stroke ejector, ie x mm:
Top: 5 x 50
Lower: 50 x 60
Operating air pressure: kg/cm2: - 5
Motor: Chief: 380V, 50 Hz, 110 kW, 6-n
To adjust the high-stamp space: 380V, 50Hz, 1,5 kW, 4-n
For lubricating oil pump: 380V, 50Hz, 0.2 kW, 4-n
DIMENSIONS:
Length: 4150 mm
Width: 5250 mm
Height above floor level: 6305 mm
Height overall: 8200 mm
Weight: 200tons
Ref. 91233
SMERAL 1000 TONS FORGING PRESS
New 1977
SPECIFICATIONS:
Maximum force: 1000 T (metric)
Bed area: 1000 mm x 950 mm
Ram area: 840 mm x 750 mm
Shut height maximum: 620 mm
Ejection: 35 mm
Ram stroke: 220 mm
Machine weight: 48 Tons (metric)
Ref. 91234
