TISSUE MILL BUILT BY RECARD
TISSUE MILL FOR SALES
- Built by Recard
- Yeara installed 1980 and overhauled in 1992
- Width at pope reel 2.750 mm
- Capacity 20 – 30 Tpd
Stock preparation:
- Conventional pulper on stainless steel recovered capacity 25 m3
- HDC Comer
- Vertical screen BC model UPI, year 1992, power 37 kW
- Deflaker
- 2 disc refiners BC power 132 kW
- Stainelss steel pipes and regulation
Tissue paper machine:
- Built by Recard
- Stopped in March 2012
- Type inclined wire with head box and suction press
- Installed in 1980 and majors rebuilding in 1992
- Tissue paper from 15,5 – 29 gr/m2
- Width at pope reel 2.750 mm
- Felt width 3.000 mm
- Width after rewinder 2.700 mm
- Speed maximum 850 m/min
- New yankee and hood in 1992
Closed head box built on stainless steel, with suction roll diameter 800 mm,
cantilever system
Pick up system
Blend drilled press diameter 800 mm
Yankee dryer installed in 1992, diameter 3.600 mm, press 5 bar with close hood
Valmet maximum temp 320ºC, 3 doctor and the yankee was metallized 1 time
Conventional pope reeler for a maximum diameter 1.800 mm, with spools
CC drive
Vacuum:
- Azmec model AL 120, built in 2003 power 132 kW
- (2) Azmec power 50 kW
Fan pump SULZER mod ZPP31-400, 21 mts, flow 667 l/s, 1.090 r.p.m., power
200 kW
VS on stainless steel
Rewinder:
- Built by Recard
- Diameter rewind 1.500 mm
- 3 belt unwinders
- Speed maximum 1.200 m/min
- Shatfless rewind
- 1 CC motor drive with belts and cones
Water treatment:
- Decanter on iron
- Krofta on stainless steel diameter 6 mts
- Centrifugal sludge 5500, 3.200 r.p.m.
Ref. 51349
TOSCOTEC FOURDRINIER PM
2.56m trim width Test liner Board Machine
General:
• 1994, Toscotec Fourdrinier PM
• Production: 150 tons/day
• Speed: 350 m/min
• Grades: Linerboard (Test-liner) – double layer sheet structure
• Basis weight: 100 – 200 gsm from mixed waste paper
• Right hand drive, 380 V, 50 Hz
• Air cushioned headboxes; inclined size press & much more
• Complete from approach flow to winder, with all spare parts, manuals, etc.
• Fully assembled, in very good condition & and available for inspection
• Stock preparation equipment available for separate price
Ref. 513155
VOITH 4.07 M OFFLINE COATING MACHINE
4.07 m Voith Off Line Coater
Typ : Offline Coating Machine
Manufacturer : Voith
Year of Construction : 1989
Working Width : 4,07 m
Trimed Paper web width : 4,04 m
Construction speed : 1,600 m/min
Operation speed ; 1,100 – 1,400 m/min
Coat Weight per side : 6-15 g/m2
Dry Content : 93-995%
Coating application system : blade coating Farbauftrag SDTA or LDTA
Coating Assembly : 2 Coater (1 for each paper side) Following IR – Dryer air float dryer and drying clylinder voith
Prewinder : Voith
Hood Ventilation
Tail Threading : 2 area ventilation, Wiessner
Oil / Grease Lubrication System : Central Lubrication for drying section, individual grease lubrication for guide rolls
Hydraulic System : Voith
Control System of PM : SPS PCS7/S5
Online colour measurement : Gretagmacbeth ER50PRF install 2000
Electric drive of PM : Siemens PCS7 Masterdrive 500V DC
Web Brake Camera System : Procemex 7 X
Ref. 513156
JAGENBERG OFFLINE COATING MACHINE
Jagenberg off Machine Coater
Typ : Offline Coating Machine
Manufacturer : Jagenberg
Working Width : 1986
Working Width : 3,02 m
Trimed Paper Web Width : 2,98 m
Construction Speed : 1,400 m/min
Operation Speed : 900 – 1,300 m/min
Coat Weight Per Side : 6-15 g/m2
Dry Content : 93-95%
Coating application System : Bent blade or Stiftblade – Coating
Coating Assembly : 2 oater ( 1 for each paper side), following IR-Dryer, Air Float Dryer and Drying Cylinder
Prewinder : Jagenberg
Hood Ventilation
Tail Threading : 2 area Ventilation, Wiessner
Oil / Grease Lubrication System : Central Lubrication for Drying Section, individual grease lubrication for guide roll
Pneumatic System : Jagenberg
Control System of PM : SPS Modicon / PCS7
Online Colour – Measurement : Greatagmacberth ER50PRF
Electric Drives of PM : Siemens PCS7 Masterdrive 500V DC
Web Brake Camera System : Papertec
Ref. 513157
