Complete Tissue machine/plant + deinking system of 1984
Complete Tissue machine/plant + deinking system of 1984 but overhauled. With max 2200 mm web width at pope. Visible in full operation Capacity: 20 tons/day (max working speed 550m/min.). Paper weights: 15-50 grs. Suitable for virgin pulp and/or waste paper. Stainless steel hydraulic headbox ST. CELLI Flat not cantilevered Fourdrinier of stainless steel. Felt length: 19,50 x 3,10m. Stainless steel machine rolls. VALMET Yankee cylinder dia. 2500 x 2500 widths, working pressure 4.5 bars, grounded by RIF in 2006. Suction press dia. 450 mm. SAFEM vacuum pump 75 Kw, 170 m3/m. Brunschweiler: hood STEAM temperature 140 C° and steam-condensate plant. CELLI Pope winder for dia. max of 1200 mm and sectional drive with inverter. Steam: BONO type BWS-D-60, capacity 2 Tm/h, pressure 12 bars, 210 C°, installed new in 1992 treatment. Compressors: 2 atlas Copco GA 30. Stock preparation and approach flow system: pulper system in stainless steel. Pumps, valves and pipes in stainless steel. Pulper 12 m3, high density cleaner; pulper, 110 Kw, 380 Volt; with spare motor, vibrating screen. Black Clowson deflaker, 55 kwmotor. Black Clowson 20” DD refiner, motor 160 Kw, 725 rpm. Recard refiner, motor 132 Kw, 700 rpm. 3 stages cleaner sections Palmac. Krofta fiber recovery flotator in stainless steel. New electric palnt by SIEI Sistemi. Complete deinking palnt by Kadant Lamort started in 2006. G CELLI slitter rewinder: max reel width: 2200 mm, speed: 600m/min, number of knives: 12 ex. With 3 unwind stands for triple layer tissue paper. Double drum slitter rewinder with hydraulic lowering table. With: drive motors for pulper, press roll and slitter rewinder and set spare disc knives for slitter rewinder. Steam: 1.65 tons/t, electrical power: 1.153 Kw/t. Water: 59.4 m3/t.
Ref. No71311
BELOIT complete tissue paper plant of 1970. Max paper width: 2100 mm
BELOIT complete tissue paper plant of 1970. Max paper width: 2100 mm. Capacity: 25/30 tons/day. Type of production: tissue. Paper weights: 15-40 grs. Operating speed: 900 m/min. Included are: complete stock preparation, steam and vacuum lines and an almost brand new Beloit (Italy) rewinder with 3 unwind stands for max width of 2100 mm, diameter of 1500 mm and speed of 750 m/min.
Ref. No. 71312
Toschi complete tissue machine of 1986, for the production of 25 tons/day
Toschi complete tissue machine of 1986, for the production of 25 tons/day
of 20 grs tissue from 2 grades recycled papers. Max Web width: 2700 mm. With: Toschi pulper, transfer pumps to the stock tank via a vibrating screen, transfer pumps from cleaners to a stock tank with agitator, refiner and in-line deflaker, Nash vacuum pump, fan pump to machine, wire section through to dry end. 3 mts wide Yankee inspected and polished in 2009. With steam drying the Yankee operating at 6 bar pressure. There is no the inking plant and customer is making 2 grades of recycled paper. High grade waste is used for with paper. Mix of grey back board an hl2 and hl1 for our 2nd grade. The Yankee is 3 meters wide.
Ref. No. 71313
BELOIT PM6 Suction Breast Roll/Yankee Paper Machine of 1969/70.
BELOIT PM6 Suction Breast Roll/Yankee Paper Machine of 1969/70.
Headbox width: 2134 mm. Wire width: 2240 mm. Wire length: 16.000 mm. Suction breast roll dia.: 956,4 mm (vacuum 2,1m 2 suction zones). Suction breast roll’s wire: 3012 mm x 3300 mm, Mesh 5. Press felt width: 2500 mm. Press felt length: 25.000 mm. Press section: one suction and one blind press. Suction press roll dia. and face: 680 mm x 2545 mm. Blind press roll dia. and face: 558,8 mm x 2388 mm. Yankee dia.: 3657 mm. Yankee width: 2476,5 mm. Max steam pressure: 12 atm. Hood: Brunnschweiler S.P.A. (Italy) of 1982. Steam pressure at the hood: 39 atm. Max steam temperature: 170 °C. Hood ventilator capacity: 4 x 25000 m3/h. Hood motor (4 pieces): 45KW/1500RPM. No. 1 exhaust ventilator motor: 13KW/1500RPM. Drive: DC motors and thyristor’s control. Max paper width: 2100 mm. Max operating speed: 900 m/min. Paper basis weight: 15-35 gsm. Max production capacity: 27,5 T/D. Pulper: (1 piece) 14m3, motor 90 KW/950RPM and no. 1 motor 75KW/730RPM. With BELOIT stock preparation. Fan pump, Serlachius, Finland, type U400/470: Motor: 220 KW/50-1250 RPM (1 piece) Q=30500 l/min. H=33 m WC. Selectifier, Bird-Beloit, Holes dia. 2,2 mm: Motor: 45KW/950 RPM (1 piece). Polydisk Filter, Jones: Motor: 7,5 KW (AC)/730 RPM (1 pece). With: no. 9 KBS and ABS Stock pumps. Zultzer Vacuum pump type, KRC-4st. 52-25 (GN19), Q(inlet)=197 m3/min., Q(outlet)=133 m3/min., Vacuum 43 kPa, Motor: 250 KW/1485 RPM (1 piece). Beloit (I) rewinder with 3 unwind stands: width of 2100 mm, dia. of 1500 mm and speed of 750 m/min. Capacity: 6600 tons/year.
Ref. No.71314
