PMT Crescent Former Tissue Paper Machine Of 2005.
PMT Crescent Former Tissue Paper Machine Of 2005.
Web width: 2.750 mm (after rewinder).
Grammages: 18 – 40 grs. Production: 80-100 ton/day. Grammage range: from 15 to 30 grs. Mechanical speed: 2000 m/min. Production speed: 1800 m/min. Stock preparation: 2 metallic belt conveyors, 2 stainless steel pulper capacity arround 25 – 30 m3, type shark, with power motor 250 kW, with discharge pump Sulzer (in this mill there are 2 lines for short and long fibers), ST stainless steel tanks with agitaros arrouns 8 units capacity (50 – 36 – 28 mr3) with Sulzer pumps, Double disc refiner Maule model 4RA – 26” with power motor 355 kW, Double disc refiner PMT DD4500 26” with power motor 355 kW, Section cleaners with completely regulation, Screen PMT on stainless steel with power motor, Full stainless steel pipes, Regulation: BTG, Foxboro, etc. Pumps Sulzer. All was installed new in 2004 – 05. Tissue paper machine: 2 Screen PMT stainless steel with power motor 55 kW, 2 fan pumps SULZER with 2 power motor each, Stainless teel crescent former, completely cantilever with adjust of the slice, for a maximum speed 2.000 m/min., Suction press diameter 900 mm, frames on stainless steel and cantilever, Sandusky dryer cylinder diameter 5.000 mm, new and never metallized, for a pres work 8 bar, full frames on stainless steel, 3 doctors. HOOD: High efficiency hood Brunnschweiler on gas up to 650 ºC with 2 burners, Scanner Voith, Automatic pope reeler, for a diameter jumbo up t 2.000 mm, with 7 or more spools. Drive section CC with DCS and QCS controls: Header roll 250 kW, Suction press 250 kW, Yankee cylinder 2 x 250 kW, Pope reeler 75 kW, Lubrication unit, Broke pulper on stainless steel. Vacuum line: Vacuum pumps NASH model 904 R1, power installed 315 kW and 3 units with collectors. Rewinder: Built by PMT Italy, speed maximum 2.000 m/min., width after rewinder 2.750 mm, Installed new in 2005. 4 belt unwinders with sectional drive CC, Diameter maximum rewind 1.800 mm, Sectional drive CC, Automatic system, Set of knifes, 2 extractor cores, Automatic wrapper for jumbos with metallic belts.
Ref. No.71322
JAGENBERG SLITTERS
JAGENBERG about 1980. One shaft rewinding. Max web width: 1300mm. Max parent and finished reels:1000mm. Min slit width:150mm. Core diam. 70/76mm. Max speed: 800m/min. Cut system: rotary knives Dienes. With: photocell, trim suction, 10 knives, rewind, etc. Materials: papers 17-500grs. Machine partially disassembled. Immediately available. Price: 29.000 Euro
Jagenberg mod. Varidur Winder TR 45 25 of 1977, overhauled in 2010. Max paper width: 3050 mm. Min. cutting length: 200 mm. Max speed: 800 m/min. Max rewinding reel dia.: 2500 mm. Max unwinding reel dia.: 2500 mm. Carrying rolls face: 3200 - 3250 mm. Numbers of knives: 0. Equipped with: Jagenberg DA unwinding stand lifting from floor, Winding station, Twin carrying drum, Dual motor drive and Siemens DC drive. Machine used for coated board. Top slitters are missing. Machine mounted but not visible in operation and immediately available. Price for machine “as it is”: 140.000 Euro.
Jagenberg mod. Varidur Slitter Rewinder of 1989. Max web width of 3600 mm. Min. cutting length: 200 mm. Max speed: 1500 m/min. Unwinding reel dia.: 2500 mm. Rewinding reel dia.: 1500 mm. Slitting group including: Grooved roll, Series of slitting knives all with their supports and many spare knives. With 2 x 75 Kw motors. 2 supporting drums with dia. 500 mm. Rider roll with dia. of 310 mm. Pneumatic reels unloader. Paper introduction made with the help of air blows and belts.
Ref. No.71323
Complete Plant For Cast Iron Connecting Rods
Complete Plant For Cast Iron Connecting Rods
Scope of the supply: is the production of cast iron connecting rods (variuos dimension) for automotive
Two units , each composed by two parallel machines that can be handled by a single person
Material of product : spheroidal cast iron
Machine composition :
Loading station with bag accumulator
System loading material from loading bag to the processing line
Bars to move cast iron connecting rods
Ultra sound Control station , on 3 points for each connecting rod
Unloading system for faulty pieces
Drilling station
Milling station for connecting road heads
Dimensional control station after processing
Unloading system of faulty pieces
Unloading system of finished pieces on container
Dimension of the connecting rods : from 160mm up to 215mm, thickness 25mm
Production capacity : 320 connecting rods/hour
Ref. No. 71324
Allimand 250 TPD Printing Writing Paper Machine N° Map 6
Allimand 250 TPD Printing Writing Paper Machine N° Map 6
PRINTING WRITING PAPER MACHINE N° MAP 6
CAPACITY 250 TPD
Main characteristics
Manufacturer : ALLIMAND in 1985
Face Width : 3730 mm (at pope)
Speed : 850 m/min
Grades : 40 to 190 gsm
Main products : Offset paper, Copy paper, Improved newsprint, Post it, Carbonless paper, Coated grades.
DESCRIPTION OF THE MACHINE
1/ Stock preparation :
Bale conveyor.
Allimand pulper 40 m3, 274 HP.
SS chest of 80 m3 with agitator
3 Allimand / bauer refiners, 24”, 28”, 30”.
SS chest of 50 m3
SS storage tank of 35 m3 with agitator.
A set of pumps.
2/ Approach flow system :
5 Stages of centri cleaners, as follows:
1ST Stage with 2 sets of 64 cleaners Ahlstrom.
2nd Stage with 1 set of 32 cleaners Celleco.
3rd Stage with 1 set of 8 cleaners Celleco.
4th Stage with 1 set of 4 cleaners Celleco.
5th Stage with 1 set of 2 cleaners Celleco.
1 Deculator with one Nash vacuum pump ans one Scanpump.
1 Pressure screen Lamort type SPE 15, slotted.
1 Pressure screen Lamort type SP 1000, slotted.
1 Pressure screen Lamort type SP 400.
3/Paper Machine :
3.1 Wet end :
Escher- Wyss headbox, 1992 with Thermatroll Measurex profile regulation.
Allimand fourdrinier table, length 37m with cantilever frames.
With Ceramic covered hydrofoils and vacufoils,
A Dandy roll dia. 800 mm, and a suction couch roll dia. 750 mm.
3.2 Press section :
1st Press as UNIPRESS with suction roll dia. 812mm and plain roll dia.875mm.
2nd Press Allibe with a top roll dia.875mm and a bottom roll with variable crown dia. 710 mm.
3.3 Pre-drying section :
1st set of 8 drying cylinders.
2nd set of 6 drying cylinders.
3rd set of 4 drying cylinders.
4th set of 4 drying cylinders.
5th set of 4 drying cylinders.
3 Brunschweiller blow boxes.
17 Madeleine blow rolls.
3.4 Calender :
Allimand 2 rolls calender with variable crown roll.
1 Measurex scanner. (humidity, thickness and grammage.)
3.5 Coating system :
1 BTG Bill blade equipment 1986.
1 Complete kitchen BTG with SS tanks , cookers , pumps etc…
3.6 Post drying-section :
2 Blowing shoes.
2 Drying cylinders.
1 set of 5 drying cylinders Allimand dia. 1500 mm.
1 Drying cylinder Allimand.
3.7 Calender :
Allimand 2 rolls calendar with variable crown 1986.
3.8 Scanner :
1 Measurex equipment 1986.
3.9 Pope reel :
1 Allimand pope reel 1993.
3.10 Drive :
1 complete sectional drive SIEMENS.
3.11 Dry broke system :
2 Black Clawson SS pulpers type Sydra 42”with agitators and pumps.
1 SS chest of 50 m3.
1 Liquid cyclone Lamort.
1 Pressure screen Lamort type CH3.
1 Classifier Allibe type 360.
3.12 Wet broke system :
1 Concrete pulper with 2 agitators Allibe 30 kw.
1 Polydisck filter Beloit type SD20G, 1989.
1 SS chest of 80 m3 with agitator and pump.
1 Rotary filter Trenner.
3.13 Vacuum system :
1 Vacuum pump Sulzer type RC-3A with ABB motor of 630 Kw.
2 Vacuum pumps Dardelet VG 54.
3.14 Rewinder :
1 JAGENBERG Varidur Rewinder.
3.15 Over head cranes :
2 overhead cranes in the machine building.
Ref. No.71327
