BÜHLER AG, SCHWEIZ H-630 B, COLD CHAMBER DIE CASTING MACHINE
Year of manufacture 1991
Controll: Bühler Datacess
Locking force 7250 kN
3-phase injection system with multiplicator
Core pull unit 2x movingside,
Ejector force 340 kN
Ejector stroke(adjustable) 175 mm
Die mounting platens 1210 x 1210 mm
Distance between tie bars 780 x 780 mm
min / max die height 300 / 950 mm
Motor capacity 45 kW
Dimension machine LxWxH 8900 x 2800 x 3100 mm
Weight 28500 kg
Ref. 612102
BUHLER 1000 TONS HIGH PRESSURE DIECASTING MACHINE
Machine BUHLER H-1000-P revised in 2009
Main features of the machine and revisión:
- Control panel year 1992 with Siemens S-5.
- New electrical installation in the machine with 7 mts. cable between machine and control panel.
- New ON-OFF valves.
- Toggle revision with new caps & bushes and platen milling.
- Hydraulic circuit revision with leaks reparation with O-joint replacement..
- New machine heat exchanger.
- New doors with electrical control and without upper guides
- piston lubricant Shot beats system
- 1 Container + Piston + Piston support for Diam 90 mm.
- Machine painted in green colour (RAL 6011 ), or colour defined by the customer.
- Put in production the machine in our installations for customer acceptation
Technical Data Bulher H1000P
Locking Force KN 10000
Injection Force KN 900
Ejection Force KN 380
Max. die height mm 1100
Min.die height mm 400
Platen dimension (WxH) mm 840 x 920
Tie Bar Diameter mm 200
Moving Platern Stroke mm 1100
Injection Stroke mm 760
Ejection Stroke mm 170
Min-max. Sleeve Diameter mm 70-130
Max. Shot weight (AI) Kg 4,9 - 17
Max. projected area (400 bar pressure cm2 4000
on metal)
Specific metal pressure Bar 680-2350
Motor rating Kw 55
Weight of machine t 38
Overall dimensions
(L x W x H) mm 9600 x 2600 x 2800
Included
- Test machine in workshop
Ref. 612105
ALUMINIUM PROCESSING EQUIPMENT
Modern 1300MM Wide Stretch Leveller
• YOM 2006
• Decommissioned 2010
• All European Drives, Controls & Bearings
• Full Range of Spares Inc Tension Rolls and Levelling Rolls
• Drawings & Technical Documentation
• Dismantled and Ready For Packing
MINO 2Hi Reversing Hot Mill
• Installed in China in 1997
• 1400MM Wide With Twin Coilers
• Incoming Slab Size 5100 x 1150 x 410mm
• Slab Weight 7010kg
• Main Drive Motor Missing (3760kw)
• Range of Spares Inc 8 x Work Rolls
• Drawings and Technical Documentation
Stretch Leveller (Left To Right Operation)
Alloy Types - 1000,3000,5000,8000 Series
Tension - 40-300N/MM
Thickness of Material - 0.15 - 1.5mm
Width of Material - 600 - 1300mm
Coil IOD - 850 - 1800mm
Spool Size 508/560 x 1400mm
Coil Weight - 8000kg
Flatness - 40I
Exit Width - 600 - 1300mm
Speed - 0-330m/min
Threading Speed - 18m/min
Max Elongation - 5%
Precision of Elongation - ± 0.01%
Max Stretching Force - 200kN
Speed Control Accuracy - ± 0.1% (stable) ± 0.3% (dynamic)
Tension Control Accuracy - ± 0.5% (stable) ± 0.3% (dynamic)
Flatness after Stretching Level - 3I
Passline of Strip - + 1100mm
Wrap Staggering Accuracy of Edge Trimming ± 0.25mm
Total Installed Power - 1550KW
Range of Spares, Drawings & Technical Documentation Included
Mino 2Hi Reversing Hot Mill - 1400mm
Installed second hand in 1997
Various Upgrades 2004 - 2008 inc New Main Gear Box
Alloys Rolled - 1000,3000,5000 and 8000 series
Work Roll Size - 1400mm barrel x 650mm diameter
Slab Size - L5500 X W1150 X H410mm
Slab Weight 7010kg
Output Coil - ID508 - OD1800
Coil Width 1180mm
Thickness 4mm
Rolling Speed - Slab 90m/min ; Coil 120m/min
Max Rolling Force - 1300tons
Main Reducer Ratio - 1.25 (New 2004)
Main Mill Motor - 3750Kw (NOT INCLUDED)
Screwdown Speed - 14mm/sec
Coiler No 1
Diameter (tension and retract scope) 580-600mm
Length 1600mm, Hydraulic Pressure 9MPa
Coiler No 2
Diameter (tension and retract scope) 482 - 508mm
Length 1400mm, Hydraulic Pressure 9MPa
2 X Belt Wrappers - 8900 x 650 x 10mm
2 x Hydraulic Shears - Max Cutter Thickness 80mm
Roller Table Rollers - 1500 x 320mm
Emulsion System - Tank 60m³; Filter 4000 Litre/Min Heater 360Kw
Range of Spares including 8 Work Rolls & 2 Sets Chocks
Extensive Range of Drawings & Technical Documentation
Ref. 612116
PECHINEY 68" SCAL JUMBO 3C CONTINUOUS STRIP CASTERS
Two Used 68" SCAL Jumbo 3C Continuous Strip Casters
Manufacturer Pechiney-SCAL 1981
Alloy Cast Capability 1xxx, 3xxx, 5xxx, 6xxx, 8xxx series re-roll
Cast Strip Thickness 4.0 - 10.0mm .160 - .397"
6.35mm most common use .250"
Cast Width 1727mm max 68"
Cast Coil Size ID - 610mm 24"
OD - 2438mm max 96"
Weight -
Casting Speed 762 - 3000 mm/min 30-118 ipm
Actual speed at .200" cast thickness 1397mm/min 55 ipm
Separating Force 2000 tons max
Equipment
- Melting Furnace Reverb type
70 tons holding capacity
- Holding Furnace 58 tons holding capacity
- Degassing and Filtration In-line molten metal type
Alcan compact design type
- Caster
- Rolls 960mm diam x 1879mm face 37.8" diam x 74" face
12 roll assemblies included
24 chocks, 4 roll shells
- Drive
- Edge Trimmer Hunter, 1" nominal trim
- Shear Included, SCAL
- Coiler Mandrel type
150 hp AC drive
- Hydraulics Included
- Cooling Water System Included
- Controls Allen-Bradley "Control Logix"
New 2003
Ref. 612117
