VERTICAL POWDER COATING LINE / USTON OIL HYDRAULIC DIRECT, EXTRUSION LINE / REVERSIBLE FOIL ROLLING MILL AND AUXILIARY
Vertical Powder Coating Line
Max. profile dimensions 150 x 200 x 7000 mm
Max load on chain 9500 kg
Conveyor rated speed 1.5 m/min
Powder coaing booth 2
Gelling Infrared Oven
Including chemical prep-treatment, conveyor system drying oven, powder coating, GEMA spraying guns
and waste treatment
Foil Rolling Mill & Auxiliary Machinery no. 2
Type 4-high reversible
Web width max.900 mm
Thickness range 15 - 100 micron
Coil I.D. / O.D. 300 / 1200mm
Rolling speed 450 mpm
- Foil doubling machine 2x0.014mm / 900 mm
- Separating/Slitting machine 2 x 15 - 30 micron / 880 mm
Foil Rolling Mill & Auxiliary Machinery no. 4
Type 4-high reversible
Width max./min. 820 / 430 mm
Entry thickness 0.30mm
Exit thickness min. 14 micron
Coil I.D. / O.D. 300 / 1500mm
Rolling speed 300 mpm
- Foil doubling machine 2x0.014mm / 1130mm
- Separating/Slitting machine 15 - 30 micron / 700 mm
2500 Mton Extrusion Line
Type : Oil-hydraulic direct with Piercer
Billet diameter 218 / 292 mm
Billet length 830 mm
Drive 3 x 200 kW
Run-out length length 25 m
Stretcher 100 ton
including induction billet heater, run-out and cooling tables, stretcher and finishing saw
2200/2500 USton Extrusion Line,8 inch
Type oil-hydraulic direct
Billet diameter 8 inch
Container length 958 mm
Main pumps REXROTH 3 x A2V 500
- gas heated log heater 6500 mm
- run-out table air/water mist
- double puller
- Cooling table, belt type
- Stretcher
- Stacking machine
Ref. 51210
UBE 35 HORIZONTAL COLD CHAMBER PRESSURE DIE CASTING MACHINE
1 second-hand horizontal cold chamber pressure die casting machine
Make: UBE
Model: 35
New in: 2004/2005 - unused
The machine is equipped with:
- 3 phase injection system (intensifier)
- Motorized die height adjustment
- Hydraulic ejector
- Connections to operate core pull unit
- Locking stroke safety device - electro-hydr.
- Central lubrication
- Pneumatic safety door
- Metal dosing unit make:
- Die spray unit make:
- Extractor make:
- Hydraulic medium: water-glycol
- Electric heated holding furnace
- Gas heated holding furnace
- Oil heated holding furnace
- Electronic control
TECHNICAL SPECIFICATIONS:
Locking force : 3550 tons
Stationary platen size : 3080 x 2725 mm
Moving platen size : 2800 x 2725 mm
Space between tie-bars : 1750 x 1750 mm
Tie-bar diameter : 375 mm
Die stroke : 1500 mm
Die space : 1250 - 2000 mm
Ejection force : 100 tons
Ejctor stroke : 250 mm
Dimension from the mounting face to ejector plate : 1500 mm
Injection force : 143 - 220 tons
Plunger stroke : 1600 mm
Shot speed : 50 - 4500 mm/sec.
Casting area : 3243 cm²
Casting weight (Al) : 50,2 kg
5 each core valves (No.3,4: Sqeeze & Core)
Hydraulic:
2 each hydraulical pumps : 55 kW
Sqeeze & Core 2 each hydraulical pumps : 30 kW
Machine dimension approx. (L x W x H) : 21000 x 11000 x 2650 mm
Machine weight approx. : 230 T
Ref. 51248
WEINGARTEN GDK 2500 COLD CHAMBER HORIZONTAL DIE CASTING MACHINE
Manufacturer WEINGARTEN
type GDK 2500
year of manufacture 1987
EQUIPMENT
el. command WEINGARTEN
casting data control ELECTRONICS
3-phase injection system with
intensification
central autom. die height adjustment
core pull units I-IV M / V+VI F
hydraulic stroke limitation system
automatic tie bar pulling system
automatic central lubrication
motorized safety door operator side
safety door back side
hydraulic ejector
medium HFC
machine configuration + documentation DE & CE
TECHNICAL DETAILS
locking force max. 2900 to
injection force 80 - 200 to
ejector force 90,8 to
die mounting platens 2300 * 2300 mm
distance between tie bars 1400 * 1400 mm
tie bar diameter 320 mm
min./ max. die height 800 - 1800 mm
Locking stroke 700 - 1200
ejector stroke 230 mm
max. casting AL. 60 kg
casting area 6260 cm²
free cycle time 120 p/h
motor capacity 119 KW
dimension machine l/w/h 14 * 3,5 * 4,3 m
weight 165 to
Ref. 51254
UBE 3500 HORIZONTAL COLD CHAMBER PRESSURE DIE CASTING MACHINE
Make: UBE
Model: 3500
New in: 2008 - unused
The machine is equipped with:
2 fold tie-bar withdrawel
Motorized die height adjustment
Hydraulic ejector
Connections to operate core pull unit
Locking stroke safety device - electro-hydr.
Central lubrication
Pneumatic safety door
Metal dosing unit make: on request
Die spray unit make: special feature (oil)
Extractor make: 6 axes robot on request
Hydraulic medium: water-glycol
Control by Mitsubishi PLC with shot monitor and shot
setting controls and profiles
TECHNICAL SPECIFICATIONS:
Locking force : 3550 tons
Stationary platen size : 3080 x 2725 mm
Moving platen size : 2800 x 2725 mm
Space between tie-bars : 1750 x 1750 mm
Tie-bar diameter : 375 mm
Die stroke : 1500 mm
Die space : 1250 - 2000 mm
Ejection force : 100 tons
Ejector stroke : 250 mm
Dimension from the mounting face to ejector plate : 1500 mm
Injection force : 143 - 220 tons
Plunger stroke : 1600 mm
Shot speed : 50 - 4500 mm/sec.
Casting area : 3243 cm²
Casting weight (Al) : 50,2 kg
2 each hydraulical pumps : 55 kW
Space required approx. (L x W x H) : 21000 x 11000 x 2650 mm
Weight approx. : 230 t
Ref. 51276
