HUNTER, STRIP CASTING, ALUMINIUM ROLLING PLANT
Machine:Aluminium Rolling Plant
Manufacturer:Hunter
Year of Manifact.:1973
Condition:
Still installed but out of operation.
Technical Data:
Type:Strip Casting
Material:Aluminium
Strip width:1650mm
Entry thickness:8,0mm
Exit thickness:2 x 0,006mm
Coil weight:11500kg
Description:
CAPACITIES:
•Casted strip 45,000 MTPY
• Cold rolled strip 30,000 MTPY
• Foils 10,000 MTPY
•3 Hunter 2nd Generation Tilting Twin Roll Continuous Casting Machines – 1500mm wide x 6mm gauge. I
• 1 Fata Hunter 4Hi Non – Reversing Aluminium Cold Mill 1600mm wide, 850m/min; refurbished ABB Electrics 2001
• 2 Tecmo Hunter Doubling Foil Mills – 1600mm Wide – 0.6 – 2 x 0.006mm Full Refurbishment 1994 & 2003•
• Various Electric Radiant Tube Annealing Ovens for coil and foil
• 1 Techint Automated Coil Painting Line – 1500mm wide 0.2 – 2.0mm gauge: two Decoilers and Recoilers
• 1 Corrugating Line for Aluminium Sheet 1500mm wide 0.25mm – 1.50mm gauge.
• Sundry Equipment including Cleaning/Stretching/Laminating Line; Cut to Length Line, Laminating and Slitting Line; Kampf Separator/ Slitter; Roll Grinding and Milling Shop; Scrap Baler, Dross Press, Extensive Range of Spares etc
Ref : 31252
FIELDING AND PLATT, OIL HYDRAULIC DIRECT, 750 MT EXTRUSION LINE
Machine:750 MTon Extrusion Line
Manufacturer:Fielding & Platt
Type:oilhydr. direct
Year of Manifact.:1961
Technical Data:
Extrusion press:
Manufacturer:Fielding & Platt
Type:oilhydr. direct
Extrusion force:7,5MN
Block Ø:109mm
Container Ø:115mm
Container length:n.s.mm
Main pumps:3 units
Main motors:3 x 50 hpkW
Billet Heater:
Manufacturer:n.s.
Type:Gas heated
Billet (log):530mm
Run-out System:
Manufacturer:n.s.
Type:beam
Run-out table length:35m
Puller:Single
Stretcher:15t
Description:
Columns: 4
Pumps:
Towler in line fixed volume 3 x 5H300 72l/min each @ 310 bars 1440 rpm. Each pump driven by 50Hp motor, 1 x variable volume pump 70l/min at up to 310 bars driven by 50hp electric motor
Ref : 31253
TREVISAN VERTICAL POWDER COATING LINE
Machine:Vertical Powder Coating Line
Manufacturer:Trevisan
Year of Manifact.:2005
Technical Data:
Type:Vertikal
Description:
Profiles maximal dimensions: 150x200x7000mm
Conveyor rate speed: 1.5 m/min
Installed electric power: 150 kW
Installed thermal power: 500,000 kcal/h
Consisting off:
- Load and Unload facility
- chemical surface preteatment
- Drying oven
- Powder Booths x 2
- Gelling Oven /Infrared oven
- Curing Oven
- Waste Cleaning Center
- Boiler (Hot Water)
Ref : 31254
ACHENBACH, REVERSING, 1700 MM COLD ROLLING MILL
Machine:4-High Cold Mill
Manufacturer:Achenbach
Year of Manifact.:1964
Technical Data:
Type:Reversing
Material:Aluminium
Strip width:1700mm
Entry thickness:8,0mm
Exit thickness:0,2mm
Roll sep. force:n.s.MN
Rolling speed:485m/min
Work roll ØxL:n.s.mm
Back-up rollØxL:n.s.mm
Coil dimensions:
OuterØ:1580mm
InnerØ:-mm
Coil weight:-kg
Drives power:
Main motor:-kW
Unwinder:-kW
Rewinder:-kW
Description:
Automatic Gauge Control (AGC)
Automatic Flatness Control (AFC)
Ref : 31255
