MAICO GK 2500 / IDRA OL 3500 / ITALPRESSE IP 2700, COLD CHAMBER PRESSURE DIE CASTING MACHINE
Manufacturer : MAICO
Type GK 2500
Year of construction 2004
Second Hand Cold Chamber Pressure Die Casting Maschine
Manufacturer : IDRA
Type OL 3500
Year of construction 2003
FULLY PROPORTIONAL with REAL TIME control
Complete with:
- 2 movable columns
Second hand Cold Chamber Pressure Die Casting Machine
Manufacturer ITALPRESSE
Type IP 2700
Year of construction 1999
The machine was manufactured in year 1999 and is still installed, but stopped from production in 2008.
Technical Data
LOCKING FORCE 26.485 kN
INJECTION FORCE 1.490 / 1.690 kN
EJECTION FORCE 702 kN
PLATEN DIMENSIONS 2.230x 2230 mm
DISTANCE BETWEEN TIE-BARS 1.430x1.430mm
TIE-BARS DIAMETER mm
MOVING PLATEN STROKE 1.500 mm
EJECTION STROKE 300 mm
INJECTION STROKE mm
min / MAX DIE HEIGHT 750 / 1.650 mm
MAX SHOT WEIGHT 51,5 Kg
MAX PROJECTED AREA 6.750 cm2
MOTOR POWER 2 x 75 Kw
MACHINE WEIGHT 175.000 Kg
FLOOR SPACE (LxWxH) 14.150 x 4.450 x 4.650 mm
Ref. 51281
TREVISAN, PROFILE DIMENSIONS 150 X 200 X 7000 MM, VERTICAL POWDER COATING LINE
New 2005
Max. profile dimensions 150 x 200 x 7000 mm
Max load on chain 9500 kg
Conveyor rated speed 1.5 m/min
Powder coaing booth 2
Gelling Infrared Oven
including chemical prep-treatment, conveyor system
drying oven, powder coating, GEMA spraying guns
and waste treatment
Condition:
As good as new, barely run over the past years
Description:
Profiles maximal dimensions: 150x200x7000mm
Conveyor rate speed: 1.5 m/min
Installed electric power: 150 kW
Installed thermal power: 500,000 kcal/h
Consisting off:
- Load and Unload facility
- chemical surface preteatment
- Drying oven
- Powder Booths x 2
- Gelling Oven /Infrared oven
- Curing Oven
- Waste Cleaning Center
- Boiler (Hot Water)
Ref. 51283
KYONGIL ENGINEERING / KOREAN MAKER, REVERSIBLE, FOIL ROLLING MILL AND AUXILIARY MACHINERY
Second Hand Foil Rolling Mill & Auxiliary Machinery no. 2,
New 2003 made by Kyongil Engineering
Type 4-high reversible
Manufacturer Kyongil Engineering
Web width max. 900 mm
Thickness range 15 - 100 micron
Coil I.D. / O.D. 300 / 1200mm
Rolling speed 450 mpm
- Foil doubling machine 2x0.014mm / 900 mm
- Separating/Slitting machine 2 x 15 - 30 micron / 880 mm
Second Hand Foil Rolling Mill & Auxiliary Machinery no. 4
Type 4-high reversible
Manufacturer Korean maker
Width max./min. 820 / 430 mm
Entry thickness 0.30mm
Exit thickness min. 14 micron
Coil I.D. / O.D. 300 / 1500mm
Rolling speed 300 mpm
- Foil doubling machine 2x0.014mm / 1130mm
- Separating/Slitting machine 15 - 30 micron / 700 mm
Ref. 51284
LINDEMANN OIL HYDRAULIC DIRECT WITH PIERCER, 2500 MT EXTRUSION LINE
Modernized in 2004
Type oil-hydraulic direct with Piercer
Billet diameter 218 / 292 mm
Billet length 830 mm
Drive 3 x 200 kW
Run-out length length 25 m
Stretcher 100 ton
including induction billet heater, run-out and
cooling tables, stretcher and finishing saw
Machine:2500 MTon Extrusion Press Line
Manufacturer:Lindemann
Type:oilhydr. direct
Year of Manifact.:1961
Technical Data:
Extrusion press:
Manufacturer:Lindemann
Type:oilhydr. direct
Extrusion force:25MN
Block Ø:218 & 292mm
Container Ø:225 & 300mm
Container length:1000mm
Main pumps:3 x Oilgear
Main motors:3 x 200kW
Billet Heater:
Manufacturer:BBC
Type:Induction type
Billet (log):830mm
Run-out System:
Manufacturer:Lein
Type:Waliking beam
Run-out table length:25m
Puller:no
Stretcher:100t
Condition: Good condition
Description:
The equipment is specially designed for extrusion of hard alloys comprising an in-line solution heat treatment furnace and a
quenching unit installed between run-out table and the stretcher. The in-line solution heat treatment furnace and a quenching unit is not included
as it is still subject to owners decision. The extrusion press is mechanically in good condition and has got complete new hydraulic and electric equipment in 2004.
The press is equipped with a piercer however, it was never used.
Miscellaneous: Plant is still installed and under power
Ref. 51285
