BLAW KNOX, EINWEG, FOIL ROUGHING MILL
Machine:4-Hi Foil Roughing Mill
Manufacturer:Blaw-Knox
Year of Manifact.:1968
Condition:
good condition
Technical Data:
Type:Einweg
Material:Aluminium
Strip width:1473mm
Entry thickness:0,152mm
Exit thickness:2x0,009mm
Roll sep. force:560MN
Rolling speed:685m/min
Work roll ØxL:241x1676mm
Back-up rollØxL:660x1626mm
Coil dimensions:
OuterØ:925mm
InnerØ:315mm
Coil weight:2000kg
Drives power:
Main motor:375kW
Unwinder:2*30kW
Rewinder:2*30kW
Description:
Electric & Motors: WESTINGHOUSE
Thicknes gauge system: FAG / FH 46 ME
Semi-automatically control
oilfilter system: Hidramation
Miscellaneous:
shut down in 2005
Ref : 31256
BUHLER H-630 B DIE CASTING MACHINES
YOM - 1995, Made by: BUHLER , Maximum power: 51 KW, Rated drive power: 45 KW, Locking force: 740 ToF, Injection force: 650 – 265 KN, Plunger stroke: 580 mm, Ejector force: 280 KN, Ejector stroke: 230 mm, Dimension of the fixed plate (HxV): 1210x1410 mm, Dimension of the moving plate (HxV): 1210x1210 mm, Distance between the columns (tie-bar): 150 mm, Min. die height: 300 mm, Max. die height: 950 mm, Die opening stroke: 780 mm, Weight: 28.5 To
Ref : 31275
INNOCENTI 2650 TONS EXTRUSION PRESS
Capacity: 2650 Tons - max productivity : 4000 kg/hours - average productivity = 1200 kg/hours - Usual extrusion speed: 22.5mm / sec - in container billet size: dia 247 mm x 850 to 950 mm long - consumption : 6.35 kWh/t - maintenance costs: 18 Keuros/year - main oil tank capacity: 5m3 - oil viscosity: 100 cst - Power: 400V, 50Hz - Approx Line foot print: 88 m x 16 m
Extrusion line composed of:
- Billet loading magazine facility (approx: 4400 x 2300 mm)
- Magazin charging facility, or holding rack (approx 4800 x 4500 mm)
Loading Area approx overall area: 10000 x 4500 mm
- Billet pusher to the oven
- Junker Gas fire furnace with 188 burners and 3 billet temperature sensors, powered by OTT Junker hydraulic power packs WS1200 (1986), and ended by a OTT Junker D-5107 Simmerath billet shear (1600 kN - 103 kVA, manufdate : 1986)
- Hot billet loading/transfer system from the shear to the container
- Heating container
- OMAV 051 (SN 73 88) Die loader/holder with waste shear and take off system
- Cooling conveyor with water cooling facility (out of the die holder) : approx dim 5500 x 330 mm
- Pull off table conveyor with Pulling jaw system (54000 mm long x 500 mm width)
- Cross cut saw dia 500 mm with chip extraction, mounted on an approx 8000 mm runway
- Cooling table composed of multiple fans, and hydraulic band conveyors for aluminium profile transfer
- Hydraulic pulling table with 2 clamping jaws each extremity (approx 48000mm long), with 260 mm jaw width
- Powered transfer system by roller conveyors (approx dim 54000 x 1000 mm)
- Cross cut circular saw (1000 mm width approx) with clamping facility
- Powered take out conveyor (approx 14000 x 1000 mm) with adjustable end and stop, and inclined take off facility
- Eizele Emmegi external sample circular saw, type: LMS450M, SN 220093 (1991)
Parts of the machine replaced: - 1985 : cold saw and cold saw conveyor
- 1988 : front plate
- 1990 : puller, hot saw and cooling table
- 1996 : container holder.
Ref : 31287
INNOCENTI 1650 TONS EXTRUSION PRESS
Description: Technical information :
Capacity: 1650 Tons - average productivity = 900 kg/hours - Usual extrusion speed: 22.5mm / sec - in container billet size: dia 179 mm x 820 mm long - maintenance costs: 20 Keuros/year - main oil tank capacity: 4m3 - oil viscosity: 100 cst - Power: 400V, 50Hz - Approx Line foot print: 81 m x 20 m
Extrusion line composed of:
- Billet loading magazine facility (approx: 6000 x 2500 mm)
- Billet pusher to the oven
- Gas fire furnace with 3 billet temperature sensors
- ERI Automation hot billet shear (SN: B 2610, Manufdate: 1991)
- ERI Automation 2 axis billet transfer robot from the shear to the container
- Heating container
- OMAV 051 SN: 37-95 Die loader/holder with hydraulic waste shear and take off unit
- Graphite take off table approx 2170 x 440 mm
- Pull off table conveyor approx 500 mm width x 53000 mm long with traveling pull off facility
- Pfeiffer cross cut saw on adjustable track
- OMAV cooling table composed of multiple fans, and hydraulic band conveyors for aluminium profile transfer approx 48000 x 4500 mm
- REXTROTH Hydraulic pulling table with 2 clamping jaws each extremity (approx 48000mm long), with 320 mm jaw width
- Powered transfer system by roller conveyors
- OMAV Cross cut circular saw
- Adjustable end cutting table 940 mm width
- OMAV powered take out conveyor (approx 9000 x 1000 mm), with band conveyor and take off facility
- Eizele external sample circular saw, type: LMS450M, SN 207065 (1992)
Parts of the machine replaced: - 1999 : 3 tie rods
- 2003 : 1 tie rods
- 2007 : container holder, cracks in the main cylinder welding.
Ref : 31288