SCHMUTZ 1450 MM WIDE ALUMINIUM FOIL SEPARATOR
Manufacturer Schmutz
Year of manufacture 1978
Working width max. 1450 mm
Strip thickness
max 2 x 20 µm,
min 2 x 5 µm
Coils Unwind (ID / OD) 300 / 1450 mm
Coil Rewinds max. 2 x 760 mm
Method of slitting Razor blades
Speed maximal 1000m/min
Technical Data:
Type:Vertikal
Material:Alu-Folie
Strip width:1450mm
Strip thickness:0,007 - 0,050µm
Number of cuts:2
Speed:1000m/min
Unwinder:
Reel Ø:1450mm
Core Ø:300mm
Rewinder:
Number of rewinders:2
Reel Ø:2 x 760mm
Core Ø:150mm
Ref. 71212
MULLER WEINGARTEN, GDK 1600, HORIZONTAL COLD CHAMBER PRESSURE DIE CASTING MACHINE
1 second-hand horizontal cold chamber pressure die casting machine
Make: Muller Weingarten
Model: GDK 1600
New in: 1982 / 1998
The machine is equipped with:
- Tie-bar withdrawal device, manual
- Connection to operate core pull unit
- 1 Plunger control system: Type Process Controll Electronics
- 1 Locking force control system: Type Metrel Type SP490
- 1 Dosing furnace Striko HD 1050/900L, year 1993
- 3 Heating devices IECI PFZ 300 2Z (double circle 24 kW), year 1998
- 1 electrostatic extraction / filter system
TECHNICAL SPECIFICATIONS:
Locking force 1600 / 2000 tons
Injection force max. 110 tons
Ejector force 65 tons
Ejector stroke max. 200 mm
Min./max. die height 550 - 1400 mm
Platen dimensions - h x v 2000 x 2000 mm
Distance between tie-bars - h x v 1300 x 1300 mm
Tie-bar-diameter 255 mm
Closing stroke 1360 mm
Weight of Al-casting max. 27 kg
Ref. 71214
LINDEMANN 4 COLUMN DIRECT / LOCHDORN, HYDRAULIC ALUMINIUM EXTRUSION PRESS
1 second-hand, 4 column hydraulic AL-Extrusion-Press
Make: Lindemann
Model: direct / Lochdorn
year: 1961 /2004
Unit with piercer
general reconditioned in 2004
control: Siemens S7
Technical Data:
Pressing capacity 2500 t
Block-diameter 218/292 mm
Recipient-diameter 225/300 mm
Recipient-length/cassette-changer 1000 mm
Hydraulicpumpe 3 x Oilgear PVV 540
Main gear 3 x 200 kW
Tank capacity 10.000 l (HLP 68)
Unit exists of:
Induction block preheating furnace
Make: BBC
Model: OPC 24 L
year: 1961
length of block 830 mm
with new control in 2008
Rollerways system:
Make: Lein
year: 1961
reconditioned in 2007
length of rollerways 25 m
Flying cut of saw
Make: Unterschütz
year: 2007
Reck unit
Make: Lindemann
Model: M16
Year: 1961
Reck capacity 100 t
Underfloor finish saw
Make: Haginger
Year: 1989
With new control and underfloor implementation
Additional Equipment:
Recipient 3 pieces diameter 225 mm
Recipient 2 pieces diameter 300 mm
Induction spooles 2 pieces diameter 225 mm
Induction spooles 2 pieces diameter 300 mm
Ref. 71215
LINDEMANN 2500 TONS DIRECT EXTRUSION PRESS WITH PIERCER
In excellent condition.
The extrusion line has got complete new Oilgear hydraulic and electrical control system, with Siemens PLC S7 in 2004, etc
2500 T Direct Extrusion Press with Piercer
Extrusion press
Manufacturer Lindemann
Type direct / piercer / 4 tie rods
Year of Manufacture 1961
Extrusion force 25 MN (2500 Mton)
Billet Ø 218 mm
Ø 292 mm
Container Ø 225 mm
Ø 300 mm
Container length 1.000mm
Die changer cassette
Hydraulic pumps 3 x Oilgear PVV 540
Main drives 3 x 200 kW
Electrical control Siemens S7
Oil tank content 10.000 ltr HLP 68
Modernizations: 2004 complete hydraulic (Oilgear) and electric (Siemens S7)
Dead cycle time 21 sec.
Billet heater Induction
Manufacturer BBC
Type OPC 24 L
Year 1961
Billet length 830 mm
Note: 2008 electrical control was replaced by new one, make IAS
Run-out system
Manufacturer Lein Unterschütz
Year 1961 2007
Run-out length 25 m
Hot saw + Single Puller
Manufacturer Unterschütz
Type flying
Year New 2007
Stretcher
Manufacturer Lindemann
Type M 16
Year 1961
Force 100 ton
Finishing saw
Manufacturer Haginger
Type Under table
Year 1989
Note New control
Spare parts
Container Ø 225 mm 3 pcs.
Container Ø 300 mm 2 pcs.
Induction spool Ø 225 mm 2 pcs.
Induction spool Ø 300 mm 2 pcs.
Ref. 71227
