LINDEMANN / BALDWIN INNOCENTI / SMS EUMUCO, ALUMINUM EXTRUSION PRESS
1. SMS Eumuco 28 MN Indirect Aluminum Extrusion Press
Year of Make: 2010
Design: Indirect Horizontal
Double Acting
Oil Hydraulic
4 Laminated Columns
Left Hand Design
Nominal Extrusion Force: 25 MN / 285 bar
28 MN / 315 bar
Billet(Cold)
Diameter: 250 mm
Lengths for solids: max 1,200 mm
Lengths for hollows (pierced): max 800 mm
Billet length: min 600 mm
2. 750 TON FIELDING AND PLATT ALUMINUM EXTRUSION PRESS
YEAR OF MAKE: 1961
TYPE: 4 COLUMN
BILLET: 109 / 110MM DIA X 530MM LONG
SPEED OF MAIN RAM: 19 MM/SEC
MAX WORKING PRESSURE: 310 BARS
3. 1650 TON BALDWIN INNOCENTI DIRECT AL. EXTRUSION PRESS
INSTALLED ON CURRENT SITE: 1992
BUILT BY INNOCENTI
BILLET DIA: 7.5”
PRESSURE: 210 BAR
4. 2500 TON LINDEMANN ALUMINUM EXTRUSION PRESS
YEAR OF MAKE: 1961
TYPE: DIRECT
PRESSURE: 25 MN
BILLET: 218MM, 292MM
5. 2650 METRIC TON BALDWIN INNOCENTI AL. EXTRUSION PRESS
ORIGINAL YEAR OF MAKE: 1968
FRONT PLATEN NEW IN 1988
TYPE: 4 COLUMN HORIZONTAL PRESS
FORCE: 2650 TON
BILLET DIA: 8 AND 9 INCH
EXTRUSION SPEED: 22.5 SEC
Ref. 712149
BLAW KNOX, ALUMINIUM FOIL ROLLING MILL
Type 4-high
Maker Blaw-Knox
Year of Manufacture 1968
Max. Strip width mm 1473
Max. Entry thickness mm 0.152
Min. Exit thickness mm 2*0.009
I.D. of Steel Sleeve mm 270
O.D. of Steel Sleeve mm 315
Length of Steel Sleeve mm 1350
Max. Coil O.D. mm 925
Min Coil I.D. mm 315
Max. Coil weight kg 2000
Working Roll dimension (Ø x L) mm 241/222 * 1676
Support Roll dimension (Ø x L) Backup rolls mm 660 * 1626
Main drive motor
- power in kW kW 375
- Voltage V V 700 V
Speed in rpm rpm 300/900 min-1
Main transmission ratio I=1
Max. Rolling speed m/min 685
Max. Rolling force Tonne 560
Back-up rolls - Morgoil Sliding bearings
Work rolls - Timken Double row roller bearings
Uncoiler:
- Type of motor Westinghouse
- Electric Motor Power kW 2*30
- Voltage V 240
- Speed rpm 450/1800 min-1
-
Min. Uncoiling tension kN
Max. Uncoiling tension kN 5,4
Recoiler:
- Type of motor Westinghouse
- Electric Motor Power kW 2*30
- Voltage V 240
- Speed rpm 450/1800 min-1
Min. Recoiling tension kN
Max. Recoiling tension kN 5,4
Type of Electrical DC supply to the main drive Westinghouse
Main cooling method Rolling oil
Type of roll adjustment
- Hydraulic cylinder (Diameter) mm 508
- Hydraulic cylinder pressure ton 2000 PSI
Gear motor Kw 60 HP
Oil Coolant Filter System
- Manufacturer Hidromation
- Type of filter HV 85-200
1135
Coolant flow L/min
Hydraulic Systems:
- Manufacturer
- Year
- Motor drive power kW 25 HP
- High Pressure Hydraulic bar 2000PSI
- Low pressure Hydraulic bar 675PSI
- Volume of Hydraulic Oil L 550 gal
- Electric control voltage V 380
Type of thickness gauge system
- Manufacturer FAG
- Year
- Type FH 46 ME
Automatic flatness control (AFC)
- Manufacturer
Year /
Type
Type of Mill Control System
- automatic
- semi automatic yes
- PLC system
Type of the electrical control equipment:
Manufacturer Westinghouse
Control system
Weight of the equipment:
Available Operational parts
Number of work rolls or sets 6 pair
Number of backup rolls or sets 2 pair
Number of spare bearings 1 set (4)
Number of spools 100
Fume exhaust system Fume hood
Spare parts
Still under supply voltage – no production!
Ref. 8122
SPIDEM 55” REVERSING HOT MILL
55” Spidem Reversing Hot Mill
Manufacture Spidem / 1963
Line Speed 140 mpm / 459 fpm
Incoming Slab Thickness - 300mm / 12"
Width - 1420mm / 56"
Length - 2650mm / 104"
Weight - 3050kg / 6733 lbs
Hot Coil Thickness - 3.0mm min / .118"
Width - 650-1400mm / 26-55"
ID - 600mm / 24"
OD - 1200mm / 47"
Weight - 2600kg max / 5730 lbs
Max Separating Force 1140 mtons
Equipment
- Mill Drive 1800hp, 210/420rpm DC motor
- Roll Sizes Work Rolls - 24" diam x 64"
Backup - 49" diam x 64"
- Slab Shear Capacity 20 mm on 1100 alloy
12 mm on hard alloys
- Edge Trimmer 3 - 6 mm thick
- Recoiler 300hp, 950/1600rpm DC motor
- Coolant System Included, with filter
- Mill Table Lengths Entry - 35.5m / 116 ft.
Exit - 64 m / 210 ft.
Alloy Series Processed 1xxx, 3xxx, 5xxx, 6xxx, 8xxx
5% magnesium content
Sold "as is, where is" installed.
Ref. 8126
RL BEST, DIRECT 4 TIE RODS, UST EXTRUSION LINE
Manufacturer:RL Best
Type:Direct 4 tie rods
Year of Manifact.:2006
Technical Data:
Extrusion press:
Manufacturer:RL Best
Type:Direct 4 tie rods
Extrusion force:26,7MN
Block Ø:203,2 & 228,6mm
Container Ø:n.s.mm
Container length:1041,4mm
Main pumps:3 Rexroth A4VSO
Main motors:n.s.kW
Billet Heater:
Manufacturer:Granco Clark
Type:Gas heated + Hot saw
Billet (log):8839,2mm
Run-out System:
Manufacturer:
Type:Belt type
Run-out table length:51,2m
Puller:Single
Stretcher:100 USt
Condition:
The press was built in 2006 but not installed and is like new.
Description:
Capacity: 3000UStons @ 3600psi
Design: 4-Column, oil hydraulic
Direct long stroke
4 Containers
2 stems
Ref. 81214