SIMPSON SAND MULLER / HUNTER, ALUMINUM FOUNDRY LINE
Machines Included
Simpson Sand Muller, Model 600 kg Batch, With Loader
Hunter Model 18C Automatic Molding Machine, 18” X 20” Molds, 100 Molds Per Hour
Hunter Model HV-18 Mold Turntable for Pouring and Cooling, 96 Mold Capacity, 3 Levels
Simplicity Mold Shakeout Machine
Goff 6 Cu. Ft. Rubber Belt Shot Blast Machine
Sand Lab, Including Sand strength, Permmeter, Compaction, MB Clay, etc…)
Ref. 71217
SMS SINGLE STAND MILL , 4 HIGH ALUMINIUM COLD ROLLING MILL
Equipment Description
SMS Single Stand Mill
Roll Diam. WR 215mm - 245mm
BU Roll Barrel Length 1625mm
WR Barrel Length 1900mm
Specification
Max Strip width 1570mm
Min Strip Width 750mm
Max Entry Strip Thickness 6mm
Min Entry Strip Thickness 1mm
Max Exit Strip Thickness 2.5mm
Min Exit Strip Thickness 0.180mm
Max Coil Diameter (O/D) 1950mm
Max Coil Weight 10.4 Tonnes
Entry Coil Inner Diameter (I/D) 610mm
Exit Coil Inner Diameter (I/D) 406mm (with spool)
Max Speed 1000m/min (power depend.)
Current Alloys Rolled C315 (5182), 5042
Previous Alloys Rolled 8011, 1050, 3003, 3005, 5251, 5019A
Notes
The Cold mill is minus all flatness control systems and measurement devices ( flatnesss bars)
The Cold mill is minus all thickness control technology and hardware. X- ray gauges etc..
The Cold mill is minus all coolant application technology and hardware. Spray plates etc..
Ref. 71252
ACHENBACH, ALUMINIUM COLD ROLLING MILL
year put in service 1964
year moved to present location 1970
revamping 1986
Manufacturer Achenbach
Maximum Entry Thickness 8.0mm
Minimum Exit Thickness 0.2mm
Maximum Width 1700mm
Mill Speed Maximum 485mpm,
Maximum Coil Diameter 1580mm
Automatic Gauge Control (AGC)
Automatic Flatness Control (AFC)
Ref. 71253
CASTAL 1100MM CONTINUOUS STRIP CASTING LINE
Manufacture Castal / 2008
Design Twin-roll 15-degree tilt-back
Cast Strip Thickness 4.5 - 6.0mm / .177 - .236"
Cast Strip Width 1100mm max / 43.3"
Alloys Cast 1xxx, 3xxx, 8xxx, and
5xxx up to 0.6% magnesium
Rolling Torque 170,000 Nm
Casting Rates
- 1xxx Series Alloys 1100-1200mm/min @ 5.5mm thick
- 3003 Alloy 900-1100mm/min @ 6.2mm thick
- 3105 Alloy 850-950mm/min @ 6.2mm thick
Coil Size ID - 508mm / 20"
OD - 1600mm max / 63"
Weight -
Equipment
- Preload Cylinder 420mm diam, 80mm stroke
560 mtons force total
- Rolls 660mm diam x 1200mm face
(26" diam x 47.24" face)
Akers Mo 22
- Roll Bearings SKF roller type
- Caster Drive 24 kW DC
- Pinch Rolls 8 kW DC drive
- Shear Hydraulic traveling type
8mm x 1000mm capacity cold
- Coiler Hydraulic expanding mandrel
Gripper slot
Outboard bearing
12 kW DC drive
8 mtons of tension
Hydraulic coil stripper
- Coil Car Hydraulic motor drive
Hydraulic lift
- PLC Controls Siemens
- Roll Lubrication System Moving graphite spray system included.
Ref. 71254
