ST • Fourdriner cantilever Head box slice width 2.700 mm Tissue paper machine
TISSUE MACHINE STILL WORKING
• Built by OVER and Recard • Width on pope reel 2.620 mm (refilled 2.600 mm) • Capacity: 20 – 40 Tpd • Speed maximum 400 m/min • Basis weight from 18 – 80 gr/m2 • Stock preparation: virgin pulp Stock preparation: • High density pulper 15 m3 consistency 12% • HDC • Maule Separplast for a capacity 40 Tpd • Key-Screen Maule capacity 40 Tpd • Disc refiner Black Clawson 18” • Set of cleaners PALMAC • 4 agitators + 60 m3 stainless steel tank • Vertical screen Lamort
Tissue paper machine: • Head box slice width 2.700 mm built by ST • Fourdriner cantilever • Yankee dryer diameter 3.600 mm and table width 2.800 mm with complete hood and 2 presses on a yankee • Press work of the yankee 4 bars • Conventional pope reel for diameter 1.600 mm • Basis weight control FOMAT • Slitter rewinder with 2 belt unwinder and diameter maximum rewind 1.300 mm • Krofta capacity 1.500 / min • Motors, pumps, pipes
Ref. CGS4165
COMPLETE TISSUE MACHINE 2.000 mm
COMPLETE TISSUE MACHINE FOR SALES STILL WORKING
• Working width: 2.000 mm • Nominal capacity: 20 – 50 Tpd • Tissue papers from 14,5 to 40 gsm • Maximum speed operation: 1.100 m/min • Stock preparation for 100% virgin pulp • 2 rewinders 1. Stock preparation - Conventional pulper capacity 20 m3 with power installed 250 Kw/ 991 rpm with metallic belt conveyor - HDC cleaner COMER complete with set of valves - (2) conical refiners Jylhavaara power installed 300 – 110 kW - (1) disc refiner AGA power installed 250 kW - Complete set of cleaners low density - (2) vibration screens - Complete set of: agitators, pumps, pressure pumps and regulation
2. Approach flow - Vertical screen - Fan pump TURO power installed 253 kW - Lubrication unit - (4) vacuum pumps NASH power installed 90 kW
3. Paper machine - Built by OVER - Type of the machine: inclined wire with suction breast roll - (2) press on yankee dryers, blend drilled and suction press diameter of the suction press 721 mm and table width 2.450 mm, blend drilled press diameter 550 mm and table width 2.380 mm (spare rolls of each) - Yankee dryer with close hood with 2 doctors. Diameter of yankee 3.600 mm and table width 2.300 mm on cast Iron. - Conventional pope reeler with spools - Sectional drive and total power installed Hood fans 170 kW (AC motor) Fan Pump 253 kW (AC motor) Vacuum Pumps 422 kW (n.4 pumps, AC motor) Stock preparation 1200 kW (pulper, refiner, deflaker, …) Reel 37,5kW (DC motor) Yankee 217 kW (DC motor) Press 1 122 kW (DC motor) Press 2 110,5 kW (DC motor) Wire motor 1 62,2 kW (DC motor) Wire motor 2 47 kW (DC motor)- Broke pulper in side of paper machine
4. Finishing - Rewinder RECARD, with 4 belt unwinders, power installed 112,4 kW, with shafts, diameter maximum rewind 1.500 mm, speed 1.000 m/min with 7 knifes installed and calendar - Salvage rewinder, with 2 belt unwinders, complete - Automatic core cutter machine - Reel wrapping for
Andritz twin wire Press
Screening plant for sawdust and chips
Andritz screen
- type Andritz SCS80 - 800
- year 2001
- capacity 800 cubicmeters / hour
- screen main dimensions 7974 mm x 5400 mm
- screen plate 966 mm x 26400 mm 10 pcs, hole diam. 15 mm
Feed conveyor to screen
Screw conveyor for accept
Screw conveyor for reject:
Steel structures:
- supporting steel structures for screen and conveyors
- stairways and walkways for operating and maintenance
Andritz twin wire Press
TECHNICAL DATA
Working width: 2000mm
Bearing distance: 2500mm
Wire width: 2100mm
Wire length (upper/ under): 11850mm/ 12700mm
Needed air pressure: 6 bar
Water consumption: 250 l/ min
Needed water pressure: 10 bar
Press load: 80N/mm
Inlet/ Outlet consistency: 3-10% / 48-50%
Enso Twin Wire Press
TECHNICAL DATA
Working width: 2000mm
Bearing distance: 2400mm
Wire width: 2400mm
Wire length (upper/ under): 9800mm/ 9800mm
Inlet/ Outlet consistency: 3-10% / 30-40%
Andritz Lime Mud Filter - Dregs Filter
Dregs Filter Andritz EIRS2025 Manufacture year 2002
Diameter 2000 mm
Length 2500 mm
Capacity 5,4 t/d; dry dregs
Consistency 45 % without polymer in green liquor clarification and 40 % with polymer
Consumption
Cold water 103 m3/d
Warm water (60-75 C) 50 m3/d
Compressed air 1,4 Nm3/min; 600 kPa
Install power 62,8 kW
Power consumption 50,3 kW
MG papers machine Installed new in 2002 – 2003
MG papers machine and heavy tissue papers
Installed new in 2002 – 2003 - Width of the machine at pope reel 2.720 mm (net 2.700 mm) - Stock preparation for 100 % recyclieng pulp - Capacity 25 - 40 Tpd
Stock preparation:
Metallic belt conveyor, with 1.500 mm, with stainless steel helical pulper capacity 15 – 18 m3 and secondary pulper type pear on stainless steel, with power motor 2 High density cleaners Hett separator type SP700, on stainless steel, with holes basket and rejects on a stainless steel vibrating screen Vertical screen Andritz type MODUSCREEN model F3, installed in 2000, slotted basket and power 75 kW Vertical screen Andritz type MODUSCREEN model F1, installed in 2000, slotted basket and power 37 kW Hot dispersion unit composed by: - 3 + 1 screw type bakers on stainless steel - High density screw press - Kneader disperger All the tanks on stainless steel also the pipes Pumps Alhstrom
Regulation Approach flow &Paper machine: 4 Vacuum pumps Siemens model 28E3320 2BY5-Z, power installed 90 kW Vertical screen Lamort SPE8, stainless steel, installed in 2001 Refiner PILAO model RTC1000, installed in 2001, power 250 kW 2 vibrating screens on stainless steel
Machine
- Erected and start up in 2002 – 2003 - Speed maximum 800 m/mmin - Basis weigth 20 – 90 gr/m2 - Completely close hood max temp 400 ºC - Automathic pope reel
Stainless steel head box, with perforate rolls and control profile, slice width 2.800 mm Stainless steel and cantilever fourdrinier, length 12.600 mm, with forming, foils and vacuum foils 1 st press section type suction press diameter 725 mm and inferior press diameter 645 mm (2) blend drilled presses on a yankee diameter 665 mm and 645 mm Yankee dryer diameter 3.600 mm and press 6 bar, with 2 blend drilled press section and close Hood high effiency Aerothermic Automatic pope reeler for diameter 2.500 mm and spools Sectional drive Broke pulpers Lubrication unit
Rewinder:
Installed in 2003 - Speed maximum 1.500 m/min - Diameter exit 1.500 mm - Installed new in 2003 - 10 knifes installed – Drive
Ref. CGS41639
