FOR LATEST OFFERS PLEASE VISIT OUR NEW WEBSITE www.bpmbllp.com

Voith Heidenheim PM9 Papermachine

Voith Heidenheim PM9 Papermachine
PAPERMACHINE "PM9"
TECHNICAL FACTS
 
• Paper line 9
Manufacturer Voith Heidenheim
Built in 1991
Capacity 240‘000 t (ø 148.5 g/m² saleable paper)
Product Doppel coated fine paper
General width slitter
winder
5.4 m saleable
(5.6 m possible under special conditions)
Speed Paper machine 340 - 1050 m/min. operating (1200 m/min. design)
Grammage range base 80 – 300 g/m² (Trials with 40-400 g/m² succesful)
Pulp type 100 % market virgin fibers, CTMP, Euca, Pine
Efficiency past 93.9 % with ø 1 brake/day
• Stock preperation
Manufacturer Voith, B+G, Metso,
Built in 1991, 1998, 2008
Level of automation 100 %
Equipment Unit dewireing, bale dewireing, bale conveyers, pulper,
puffer tanks
Pulper 11 & 12 & 13 = 80 m³/pulper
Typ P11 & P12 Jylhä JP 480 V-G (1991)
P13 Metso OptiSlush VM (2008)
 
• Paper machine 9
Description Paper machine
Refiner, Screening section, headbox (evener rolls),
Fourdriner, Duo former D, Duo Centri II, 39 cylinder
drying section, uninstalled speedsizer, 14 cylinder post
drying section, 1 cooling cylinder, 1 swing dryer/colling
cylinder, machine calander steel/steel, pope reeler
Special Speedsizer are not installed but base material are partly
available
The evener roll headbox provides a wide grammage
range (30-300 g/m²)
Press section designed for a shoe press as press 4
Edge cutting in the pope section
 
• Unwinder 9
Width 5,580 m
Max edge cuting size 50 mm
Speed 2000 m/min.
 
• Coating machine 9
TECHNICAL FACTS
Speed 700-1050 m/min. operating (1400 m/min. design)
Configuration 2 side coating (pre and top)
Coating stations 4 application roll coater
Pre coat weight 10-30 g/m² per coater - stiff blade
Top coat weight 7-14 g/m² per coater – bent blade
Width pope 5,500 m
Description coating
machine
Off line coating machine with 4 coating stations -
flying splice unwinder, 4 coater stations with applicator
roll and blade, IR dryer, blow dryer, cylinder, softnip
calander online, pope reeler
 
• Super calander 91 & 92
TECHNICAL FACTS
Speed 350-650 m/min. operating (800 m/min. design)
Configuration 11 nips
Rolls 12 rolls (4 heated)
Rolls Steel, cotton/poly urethan
Width pope 5,480 m
Description calander
machine
unwinder, 12 rolls (one 6 zones profiler roll), pope
 
• Slitter Winder 91
TECHNICAL FACTS
Speed 2100 m/min. operating (2500 m/min. design)
Configuration Vari Top; center roll winder
Number of reel 6
Number of slitters 8
Width 5,500 m (5,600 m has to check)
Cores 70/76/150 mm; handling by hand
Special Heavy/light reel supports, Core cutting machine, reel
transport by conveyer belt
 
• Reel packing machine 9
TECHNICAL FACTS
Supplier Kleinwefers
Number of reels/hour 90 designed (62-75 operating)
Width 388-3100 mm
Ø max. reel 1500
wraping type paper
Max. Reels / day 1950 in relative to size of reels
 
 
Ref. CGS101356

Bielloni Paperclam Cleo P120 Solventless Film Laminator

2000 BIELLONI model PAPERCLAM CLEO P120 Solventless Film Laminator
Year of manufacture: 2000
Equipped with:
Pile feeder with pneumatic table
Dust suction device
Heated press unit
Automatic sheeter
Stacker
Technical specifications:
Maximum mechanical speed: 60m/min.
Maximum format: 120 x 140 cm.
Minimum format: 35 x40 cm.

Ref. CGS101377

Fourdrinier Yankee Tissue Paper Machine

Fourdrinier Yankee Tissue Paper Machine
Type: Fourdrinier Yankee PM
Built: 1970
Last production: 2002
Basis weight: 19 – 40 g/m2
Trim width: 3 200 mm
Construction speed: 500 m/min.
Capacity: up to 50 tpd.
 
SHORT DESCRIPTION:
1. Complete stock preparation with 2 pulpers and 6 Jordans
2. Complete constant part with pumps, mixers, centricleaners, high density cleaners and vibrating
screens.
3. Headbox (pressure headbox with two perforated rolls)
4. Wire-section – fourdrinier
5. Press-section (2 presses, 2 felts)
6. Yankee cylinder  4 500 mm with high efficiency air hood (steam heated)
7. Pope reel
 
DETAILED DESCRIPTION:
 
STOCK PREPARATION:
1. 2 pulpers ST2 9 m3, motor 90 kW
2. Pulper pump 1 500 l/min. with motor
3. Mixer on top charging chest, A800, motor 22 kW
4. Mixer on bottom charging chest, A800, motor 22 kW
5. Mixer on stock chest A800, motor 22 kW
6. 4 refiners Escher Wyss R2 with motors, rotor type M6/800/0, stator type M6/800/30
7. 2 mixers on chests after refining with motor
8. pump on chests after refining with motor
 
FLOW APPROCH SYSTEM:
1. 5 pcs centrifugal cleaner for thin stock Escher Wyss DR 3000
2. High pressure screen cleaner Finckh, type 1 with holes 1,6 mm, motor 18 kW – 2 pcs.
3. Vibration sorter Finkch E1/0,75 m2, motor 4 kW
4. Pulper ST-1, motor 70 kW
5. Pump on pulper ST1 with motor
6. Wet broke cutter A500, motor with gear-box 7,5 kW
7. wet broke thickener A1000, width 2 500 mm, PIV gear-box and motor 2,2 kW
8. Deflaker Escher Wyss E1K with motor
9. High pressure pump Vogel 44V, 18 m3/h, motor 12 kW
10. Headbox – high turbulation with two perforated rolls  200 x 3 390 mm (open area 30%)  225 x
3 390 mm (open area 50%) motors 0,75 kW each
11. Pump on machine chest with motor
12. Mixer on machine chest with motor
13. Pump for wet broke with motor
14. Mixing pump with motor
15. Pump – white water 1 with motor
16. Pump – white water 2 with motor
17. Pump – clean water from flotation with motor
18. Pump – stock from flotation with motor
 
PAPER MACHINE:
1. Brest roll  566 x 3 600 mm
2. Wire leading rolls  250 x 3 600 mm – 4 pcs
3. Wire driving roll  566 x 3 600 mm
4. Suction press roll  762 x 3 500 mm, shell thickness 41 mm, drilling shape S66/SR2,
holes diameter 10/9 mm, suction roll width 100 mm
5. Top plain press roll  725 x 3 550 mm
6. 14 pcs. felt leading rolls  256 x 3 750 mm + 2 pcs spiral guiding rolls
7. Yankee cylinder  4 500 x 3 700 mm, test pressure 10 bar, working temperature 158°C, shell
thickness 48 mm, remaining thickness 45.,2 mm, max. speed 510 m/min.
8. Paper leading rolls  250 x 3 540 mm – 2 pcs.
9. 2nd press roll  775 x 3 700 mm
10. All necessary blade holders on all rolls with oscillating devices
11. All necessary low-and high-pressure showers with oscillating devices
12. Pope roller  1 000 x 3 500 mm
13. 2 pcs stretch rolls  170 x 4 000 mm
14. Central lubrication system type 2-U 400 KE, with two oil pumps with motors 0,75 kW each, oil
tank 700 l
15. High efficieny drying hood with 8 ventilators with motos
16. Steam and condensing system with two separation tanks
VACUUM PUMPS:
For suction boxes: Siemens Ba 331 with gear-box and 6-pole motor
For suction press: Siemens Ba 721 with gear-box and 4-pole motor
For felt suction boxes: Siemens Ba 721 with gear-box and 4-pole motor
Drive: DC motors drive.
Machine control system: based on central computer unit.

Ref.CGS101379