BOARD MACHINE 3500MM, 77,000 TONS/YEAR
OFFER FOR SECOND-HAND EQUIPMENT: 1x Board Machine 3500mm
Year of manufacture: 1961
Annual Capacity: 77,000 tons/year
Trim width on pope: 3500 mm
Grammage: 300 – 600 gsm
Paper thickness: 0,40 – 1,01mm
Machine setup: 1 long fourdrinier, 2 short formers, 6 cylinder moulds
Surface finishing: Size press 2-sided
Upper side 3x coated
Rollflex
Blade
Air burst
Back side treated with scraper rollblade
Drive: On the right hand side when looking from the wire part
Drive consists of individual AC and DC motors
Production: Various sorts coated GD/GT
Grey board middle coated
Grey board one side coated
Various special sorts
Machine status: Installed, out of operation since early 2010
Complete Board Machine working width 3500mm, annual capacity 77,000 ton / year, including
electrical part, motors, pumps and all other components.
Three stock preparation lines for aggregate capacity of cca 600 t/d:
- Line 5 for 350 – 400 tpd – complete line with hole/slots screening for mixed waste paper
- Line 3 for 250 – 300 tpd – complete line with hot dispersion Voith
- Line 6 for 150 – 200 tpd – complete line with hole screening for bright and white waste
paper
Machine confinguration:
- Wire part with 1 fourdrinier, 2 short formers, 6 cylinder moulds
- Press part
- Pre- dryer part with 27 dryers
- 2 Yankee cylinders
- Size press
- After dryer part with 17 dryers
- Coating rollflex, blade cooling cylinder
- Machine calander
- Measuring frame
- Pope reel
Slitter rewinder Jagenberg Vari Dur TR45-21/610, working width 3600mm
Jagenberg Duplex sheet cutter DQSM – GL, working width 3600mm
Spare parts as far as available
Technical documentation includes technical plans and calculations relating to expansion of
capacity of the above board machine to 150,000 ton/year, worked out in cooperation with
company Pama, Germany.
Ref. 101242
MITSUBISHI DAIYA 1F-6 FOR CARDBOARD
YEAR: 1994
MAX PAPER SIZE: 520 x 720MM
PAPER THICKNESS: 0.2-0.8MM
SEMI-APC
DAIYAMATIC
API
TOTAL COUNTER: 141 Million
*No damages on cylinders
Ref. 101254
BELOIT 3500 MM TISSUE PAPER MACHINE
3500 mm Beloit Tissue Paper Machine
Year of construction: 1969
Right hand drive
Drive and hood rebuilt in 1990
Forming section:
• Beloit headbox slice 3580 mm
• Inclined wire with sucion breast roll - High and low vacuum
• Wire width: 3710 mm - 16 m long
Felt section:
• pick-up box with 14 mm slice
• suction press Ø 790 mm
• blind drilled press Ø 695 mm
• 2 felt conditioning boxes with 14 mm slice
Escher-Wyss Yankee:
• Ø 3625 mm, face 3850 mm
• Max working pressure 8 bars
• Material: grey carbon steel class 60
• Hard metallized surface
• Bombé 1,18 mm
• 3 Lamort doctor blades
Metso Duo-System hood
• Gas burners
• Max working temperature 460 C°
Dry section with 8 adjustable sectors
Capacity: about 30.000 ton/year - 70/85 Tpd
Speed: 1300 m/min
Grammage: 15 to 30 gr/m2
DCS and QCS systems available
15 m3 high consistency broke pulper with vertical and horizontal impeller, transmission belts, engine power 150 Kw, 380 V, feeding belt conveyor
Complete stock preparation with:
• 30 m3 medium consistency pulper, transmission rotor by belts, enginer power 250 Kw, 380 V, feeding belt conveyor
• 2 x 20" Beloit disc refiners with 240 Kw motors
• 2 Beloit deflakers
Approach flow:
• fan pump for 45.000 lt/min
• 2 Beloit centriscreens, 1.2 mm holes
• Vacuum system with 4 vacuum pumps: 2 x Nash CL 3001 - 1 x Nash CL 2001 - 1 x Elmo Siemens
Beloit 4 ply rewinder with calender
Complete effluent water/sludge treatment plant
Stopped Summer 2009
Ref. 101260
OVER MECCANICA 2700 MM PAPER MACHINE FOR TISSUE AND MG PAPERS
Year of construction: 2003
Paper width at pope: 2700 mm
Speed: 700 m/min
Paper basis weight: 30 to 90 g/m2
Production capacity: 38 Tpd with 40 g/m2
Forming section: fourdrinier
Adjustable hydraulic headbox (with 27 sectors)
Breast roll
Flat fourdrinier (with 12 suction boxes)
Felt section
Top felt section
Bottom felt section
Suction press roll (between top and bottom felts)
2 press rolls against Yankee
Dryer section
Over Meccanica Yankee cylinder Ø 3657 mm (12')
Steam hood aerothermic
Pope winder
Celli slitter rewinder
Ref. 101262
