COLD ROLLING MILL FACILITY FOR STEEL COIL AND SHEET
COLD ROLLING MILL FACILITY FOR STEEL COIL AND SHEET
Cold rolled steel (CRS) factory using different technology and equipment for the production of a full standard range of flat cold rolled products.
Production capacity: 200.000 ton per year
Incoming Material:
Hot Rolled Steel Coils 24 Ton
width 1.320 mm
max thickness 5 mm
Products:
cold rolled strip or sheet various grades and widths
thickness range 0,2 to 3,5 mm
sheets up 6 meter length
Line I - Hot Rolled Strip Pickling Line
Line II - Sendzimir Mill
Line IV - Temper Mill
Line V - Combined Tempering and Tension Line
Line VI - Medium Gauge Slitting Line
Line VII - Light Slitting Line
Line VIII - Combined Light Slitting and Cut-to-length Line
Line IX - Medium Cut-to-length Line
Line X - Rolls Preparation Workshop
Ref. 31328
KUKA PRESSURE WELDING LINES WITH MAGNETIC MANIPULATED ARC
2 off complete KUKA Pressure Welding Lines with magnetic manipulated Arc, formerly used for Rear-Axle / Joint-Knuckle Welding + Annealing with Facing/Milling, Part-Handling and Measuring Unit (new 1996)
Lines can be used for any other pressure welding purposes!
Line consisting of:
- 2 x 2 off KUKA MAGNETARC
H 15000/2000 Units
with SIEMENS PLC
- 2 x 2 off KUKA Annealing Stations
- 2 off Part-Handling and
Conveyor Systems
- HONSBERG final Facing
+ Milling Machine
- FANUC Robot Handling for finished Parts
- GFM RSS 90/90 – VP 10 Optical Measuring Unit
Ref. 31349
COMPLETE PLANT FOR STEEL DE ZINCING LINE- STEEL-ENG
This plant was built to remove zinc from galvanised/coated steels. Applying a technology which removed the zinc before the steel is melted. Design capacity was 120,000 metric tons of coated steel to produce 2000 tons of zinc powder
SECTION 1
MERTEC BUILDING
SCRAP INFEED
1-1 1 Walking Floor - Scrap Metal Infeed,
"Keith Walkin American Industries",
12200mm(L) x 3200mm(W) x 2500mm(D) Approx,
Vibratory Outfeed, Complete with Hydraulic Power Pack -
"American Industrial" Driven by 25HP Motor,
Hydraulic Oil Holding Tank, Heat Exchanger
and Skid Mounted
1-2 1 Conveyor - Inclined Infeed Rubber Belt,
11300m(L) x 600mm(W) Approx,
3 Phase Geared Motor
1-3 1 Conveyor - Inclined Outfeed Rubber Belt,
12500mm(L) x 300mm(W) Approx,
Northern Conveyors, Model No: MR35-10, Serial No: 1045
1-4 1 Conveyor - Inclined Infeed to Drum, Rubber Belt,
14000mm(L) x 650mm(W) Approximately
1-5 1 Compressor - Air, "Ingersoll Rand",
Model: 7TM10, Serial No: 00143,
Driven by 7.5Kw Motor, All Mounted on Air Receiver
1-6 1 Sump Pump, Mobile, "Versa Matic",
Model: E2PA6D669-CP-OE,
Serial No: 129604, Built: 2006, Complete with
Stainless Steel Leachate Strainer/Filter
Model: N0102 Serial No: 0337,
80 Micron All Mounted on Trolley
1-7 1 Drum - Rotary Spray Leaching Stainless Steel,
"McLain Stainless",
3000mm(Dia) x 12500mm(L) Approximately,
Mounted on 4 x 45Kw Driven Rollers,
"SEW" Geared Drives, Concrete Plinths
and Infeed Chute Including
3 x Stainless Steel Heat Exchangers,
300mm(W) x 2400mm(L) x 500mm(H),
Approx 40 Tonne Stainless Steel
1-8 3 Strainer/Filters,
Stainless Steel, 180mm(Dia) x 700mm(L),
with Shut Off Valves
1-9 1 Pump - Caustic Soda Transfer,
"Sam Turbo"
1-10 1 Pump - Caustic Soda Transfer,
"Sam Turbo"
1-11 1 Extraction Fan - Vapor Leaching,
900mm(Dia) x 400mm(W), Complete with Drive &
Radiator, Stainless Steel
1-12 1 Vibratory Feeder,
"General Kinematics", Model No: 48X16X12,
Serial No: G-9698-1, 1200mm(W) x 3500mm(L),
with 4 Spring Mounts & Steel Frame Supports
1-13 1 Vibratory Outfeed, "General Kinematics",
Model: SD-C/36/48X18X50,
Serial No: C-9698-2,
1200mm(W) x 15300mm(L),
with Fully Enclosed Canopy, Water Spray System,
Steel Support Frame & Wash Wash Over Flow Tank
1500mm(L) x 1200mm(W) x 1100mm(D) & Agitator
1-14 1 Conveyor - Cross Feed Rubber Belt,
"Melbourne Conveyor Company",
600mm(W) x 3200mm(L),
3 Phase Geared Drive Motor, Infeed Chute,
2 x Outfeed Chutes & Steel Support
1-15 1 Bin, Steel
1-16 1 Conveyor - Vibratory Outfeed, "General Kinematics",
Model No: SC-D 36/48X18X50, Serial No: C-9698-3,
1200mm(W) x 14000mm(L), & Steel Support Frame
1-17 1 Conveyor - Inclined Rubber Belt,
500mm(W) x 10000mm(L),
Infeed/Outfeed Chute, Steel Support Frame
1-18 1 Conveyor - Outfeed Rubber Belt,
500mm(W) x 24000mm(L),
Steel Support Frame
1-19 1 Conveyor - Outfeed to Dump, Rubber Belt,
500mm(W) x 16000mm(L),
Steel Support Frame
1-20 1 Conveyor - Inclined and Vertical Magnetic Outfeed,
500mm(W) x 8000mm(L)
1-21 1 Conveyor - Inclined and Vertical Magnetic Outfeed,
500mm(W) x 8000mm(L)
1-22 1 Pump - Water Wash Overflow,
Complete with Drive
EVAPORATOR
1-23 1 Evaporator - Double Effect Sodium Hydroxide Falling
Film, "Rosenblad Design Group Inc" Comprising;
Evaporator Effect No.1:
316 Stainless Steel Vessel,
1925mm(Dia) x 5475mm(H) Approximately,
1745 Square Feed Heating Surface and
"ITT Goulds" Model: 3298-1 x 1.5.85
Effect No.1 Transfer Pump Driven by 5.5Kw Motor
1-24 1 Evaporator Effect No.2:
316 Stainless Steel Vessel,
1925mm(Dia) x 5475mm(H) Approximately,
1790 Square Feet Heating Surface and
"ITT Goulds" Model: 3196-4x6-10H
Effect No.2 Transfer Pump Driven by 4Kw Motor
1-25 1 Surface Condenser -
Feed Liquor Preheated, 316 Stainless Steel,
800 Square Feet Heating Surface and
"ITT Goulds" Model: 3196-1x1.5-6STX
Condensate Transfer Pump Driven by 2.2Kw Motor
1-26 1 Condensate Vessel, 316 Stainless Steel,
300mm(Dia) x 1750mm(H)
1-27 1 Pre-Heated Feed Tank, 316 Stainless Steel,
600mm(Dia) x 1250mm(H) and
"ITT Goulds" Model: 3196-1.5x3-6STX
Pre-Heated Feed Transfer Pump Driven by 1.1Kw Motor
1-28 1 Cooling Water Return Tank, 316 Stainless Steel,
600mm(Dia) x 1850mm(H) Approximately,
"Nash" Model: EC-50M Evaporator Vacuum Pump
Driven by 2.2Kw Motor, "March" Model: 320-CP-MD
Vacuum Circulation Pump Driven by 0.6Kw Motor,
Condensing Vessel and Condensing Recirculation Pump
1-29 1 Emergency Eye Wash,
Stainless Steel, "Ashley"
1-30 1 Thermal Fluid Heater "Aquaheat TPC",
Model: TPC-300E, Serial No: 30/741/06,
Built: 2006 3,486 Output, Complete with
"Nuway" Model: NG-150 Gas Burner
1-31 1 Vessel - Hot Oil, Mild Steel,
1200mm(D) x 1700mm(H), Vertical
1-32 1 Vessel - Blow Down, Mild Steel,
1200mm(Dia) x 1500mm(H), Vertical
1-33 1 Pump - Circulation Primay Hot Oil,
"Allweiler AG",
Model: CTWH80-250/01,
Driven by 45Kw Motor, Asset No: 200-PU-016A
1-34 1 Pump - Circulation Primay Hot Oil,
"Allweiler AG",
Model: CTWH80-250/01,
Driven by 45Kw Motor, Asset No: 200-PU-016B
1-35 1 Skid, Mild Steel,
(For 2 Primay Hot Oil Pumps as Above)
2200mm(L) x 1200mm(W)
1-36 1 Cooling Tower - Water, "Lakeside Cooling Towers",
Model: MA30-90, Serial No: TN-6436,
Complete with Top Mounted Fan and Controls
1-37 1 Pump - Cooling Tower Water Circulation No.1,
Mounted on Skid
TANK FARM
1-38 1 Tank - Caustic Make Up,
Stainless Steel,
6200mm(H) x 4000mm(Dia) Approximately,
75,000 Litre Capacity
1-39 1 Pump - Caustic Make Up Feed, "Sam Turbo"
Size: 90 x 40, on Stainless Steel Mountry
1-40 1 Tank - Secondary Water Holding,
6200mm(H) x 3000mm(Dia) Approximately,
40,000 Litre Capacity, Stainless Steel
1-41 1 Pump - Secondary Water Holding Feed, "Sam Turbo"
on Stainless Steel Mounting
1-42 1 Tank - Primary Water Holding,
6200mm(H) x 3000mm(Dia) Approximately,
40,000 Litre Capacity, Stainless Steel
1-43 1 Pump - Primary Water Holding Feed, "Griswold"
Model: SAA11010,
Size: 51.5 x 1x 80764DS-SESS,
on Stainless Steel Mounting
MEZZANINE FLOOR AREA
1-44 1 Lime Silo, Mild Steel,
4600mm(Dia) x 5000mm(H) Approximately,
Complete with Conical Bottom, Vibratory Bottom,
Shut Off Valve, Outfeed Horizontal Lime Auger
4000mm(L), Outfeed Vertical Lime Auger 8000mm(L)
and Top Mounted Dust Collector
1-45 1 Lime Slurry Tank, Stainless Steel,
1700mm(Dia) x 1000mm(H), Complete with
Top Mounted Agitator, Infeed Hopper Including
Outfeed Lime Auger From Hopper
1-46 1 Lime Reaction Tank No.1, Stainless Steel,
4400mm(Dia) x 6000mm(H) Approximately,
Complete with Top Mounted Agitator,
90,000 Litre Capacity
1-47 1 Lime Reaction Tank No.2, Stainless Steel,
4400mm(Dia) x 6000mm(H) Approximately,
Complete with Top Mounted Agitator,
90,000 Litre Capacity
1-48 1 Centrifuge, "Heinkel",
Model: HF-800.1, Serial No: 1275/13,
Built: 2006, Drum Speed: 1600Rpm,
Inner Bowl 800mm(Dia)
1-49 1 Rotary Drying Chamber, "Wyssmont",
Model: Turbo Dryer (Note: Partly Stripped) and
1-50 1 Fan - Feed/Blower, "Champion",
Type: HRP, Serial No: 1073006-1, Complete with Drive
1-51 1 Silo - Zinc Powder,
Stainless Steel,
3000mm(Dia) x 2500mm(H) Approximately,
Complete with Vibratory Bottom and
Outfeed Inclined Auger 200mm(Dia) x 2200mm(L)
1-52 1 Strainer/Filter - Discharge Wash Water,
Serial No: 0339, 80 Micron Capacity
1-53 1 Dust Extraction Unit - Stainless Steel,
"WAM Australia Pty Ltd",
1000mm(W) x 1400mm(L) x 1600mm(H), on Stand
1-54 1 Pump - Lime Reaction Transfer No.1, "Mono",
Model: C198C40ARA/G625, Serial No: 08F0682
1-55 1 Pump - Lime Reaction Transfer No.1, "Sam Turbo",
Serial No: 15111, Driven by 5.5Kw Motor
1-56 1 Sump Pump, Fixed, "Versa Matic",
Complete with Stainless Steel Lime Pit Sump
Strainer/Filter, Serial No: 0338
1-57 1 Tank - Square, Stainless Steel,
1000mm(L) x 800mm(W) x 1000mm(H) Approximately,
Complete with Hinged Lid and Handle
1-58 1 Pump - Clarifier Transfer, "Sam Turbo",
Type: N40/230, Serial No: 15539, Mounted on Skid
1-59 1 Work Bench
Stainless Steel Topped & Timber Frame
1-60 1 Tank - Filter Press Slurry, Stainless Steel,
1000mm(L) x 800mm(W) x 1000mm(H) Approximately,
Complete with Closed Top
1-61 1 Tank - Pregnant Solution, Stainless Steel,
3800mm(Dia) x 5500mm(H), Complete with
Manhole and Access Stairs, 60,000 Litre Capacity
1-62 1 Pump - Pregnant Solution Transfer,
Mounted on Skid
1-63 1 Strainer Bank, Stainless Steel, Comprising;
3 Inline Filter/Strainer Valves and 2 x Heat Exchangers
1-64 1 Tank Spent Electrolyte, Stainless Steel,
4400mm(Dia) x 6000mm(H), Complete with
Manhole and Release Valve, 80,000 Litre Capacity
1-65 1 Tank - Zinc Settle, Stainless Steel,
2400mm(Dia) x 1400mm(H), Complete with
Top Mounted Agitator
1-66 1 Tank - Zinc Slurry, Stainless Steel,
1400mm(Dia) x 2000mm(H), Complete with
Top Mounted Agitator, Shut Off Valve and Sensor
1-67 1 Pump - Zinc Product Vertical, "Mono",
Model: C15BC31APA/G115, Serial No: 06E0457,
Driven by 4Kw Motor
1-68 1 Pump - Zinc Product Vertical, "Mono",
Model: C15BC40APA7G115, Serial No: 07F0646,
Driven by 4Kw Motor
1-69 1 Structure for Zinc Settle and Zinc Slurry Tanks,
Mild Steel Upright (Scrap Only),
Complete with Stairs & Hand Rails
1-70 1 Pump - Building Sump,
Driven by "Teco" 0.75Kw Motor, on Frame
1-71 1 Filter/Strainer, Stainless Steel,
Serial No: 0335, on Stand
1-72 1 Filter Bank, Stainless Steel Comprising;
3 Inline Filter/Strainers and Valves
1-73 1 Pump - Evaporator Feed, "Griswold",
Size: 53 x 1.5 x R0757SSSESS,
Serial No: 6A-970222B, Mounted on Skid
1-74 1 Pump - Zinc Solution, "Griswold",
Driven by 11Kw Motor, Mounted on Skid
1-75 1 Pump - Zinc Solution, "Griswold",
Driven by 11Kw Motor, Mounted on Skid
1-76 1 Pump - Underflow Flush,
Mounted on Skid
1-77 1 Lime Filter Press,
10000mm(L) x 1200mm(W), Complete with "Mclaine"
Undermounted Stainless Steel Catch Tank with
Twin Auger Units, Hydraulic Power Pack, 98 Filter Plates
1-78 1 Clarifier - Pregnant, Stainless Steel,
2500mm(L) x 2400mm(W) x 2300mm(H),
Complete with Bottom Mounted Auger and
Inclined Outfeed Stainless Steel Auger
1-79 1 Clarifier - Pregnant, Stainless Steel,
2500mm(L) x 2400mm(W) x 2300mm(H),
Complete with Bottom Mounted Auger
1-80 1 Emergency Eye Wash,
"Ashley", Stainless Steel
1-81 1 Electro Winning Cell No.1, Complete with
Stainless Steel Lid , Copper Buzz Bar,
Internal Plates and "Clint Power" Rectifier,
Model: SC20M4CVC, 415 Volt and 172Amps with
Controls and Mounting, Asset No: 300-RF-001A&B
1-82 1 Electro Winning Cell No.2, Complete with
Stainless Steel Lid, Copper Buzz Bar,
Internal Plates and "Clint Power" Rectifier,
Model: SC20M4CVC, 415 Volt and 172Amps with
Controls and Mounting, Asset No: 300-RF-002A&B
1-83 1 Electro Winning Cell No.3, Complete with
Stainless Steel Lid, Copper Buzz Bar,
Internal Plates and "Clint Power" Rectifier,
Model: SC20M4CVC, 415 Volt and 172Amps with
Controls and Mounting, Asset No: 300-RF-003A&B
1-84 1 Electro Winning Cell No.4, Complete with
Stainless Steel Lid, Copper Buzz Bar,
Internal Plates and "Clint Power" Rectifier,
Model: SC20M4CVC, 415 Volt and 172Amps with
Controls and Mounting, Asset No: 300-RF-004A&B
1-85 1 Electro Winning Cell No.5, Complete with
Stainless Steel Lid, Copper Buzz Bar,
Internal Plates and "Clint Power" Rectifier,
Model: SC20M4CVC, 415 Volt and 172Amps with
Controls and Mounting, Asset No: 300-RF-005A&B
1-86 1 Electro Winning Cell No.6, Complete with
Stainless Steel Lid, Copper Buzz Bar,
Internal Plates and "Clint Power" Rectifier,
Model: SC20M4CVC, 415 Volt and 172Amps with
Controls and Mounting, Asset No: 300-RF-006A&B
1-87 1 Electro Winning Cell No.7, Complete with
Stainless Steel Lid, Copper Buzz Bar,
Internal Plates and "Clint Power" Rectifier,
Model: SC20M4CVC, 415 Volt and 172Amps with
Controls and Mounting, Asset No: 300-RF-007A&B
1-88 1 Electro Winning Cell No.8, Complete with
Stainless Steel Lid, Copper Buzz Bar,
Internal Plates and "Clint Power" Rectifier,
Model: SC20M4CVC, 415 Volt and 172Amps with
Controls and Mounting, Asset No: 300-RF-008A&B
1-89 1 Filter Press, "Perrin",
Serial No: 2525,
(Shell Only - No Filter Plates)
1-90 1 Packaged Air Compressor, "Kaeser",
Model: BS-50, Serial No: 461732,
Built: 1986, Showing 26,650 Hours
1-91 1 Air Dryer - Refrigerant, "SMC",
Model: PDE-60S
1-92 1 Air Dryer - Refrigerant, "SMC",
Model: PDE-75S
1-93 1 Air Receiver, Mild Steel,
800mm(Dia) x 2000mm(H) Approximately
1-94 1 Crane - Overhead Electric, "JDN Monocrane",
Model: Hyperspeed MRC,
10 Tonne Capacity C4M4 Class,
Serial No: 260-049,
30000mm Span x 90000mm Travel,
Complete with Electric Wire Hoist and Pendant Control
ELECTRICAL RETICULATION, PLC'S AND CONTROLS
1-95 1 Electrical Reticulation, PLC's and Controls Comprising;
Motor Control Cabinets (PCC),
PLC Cabinets, IT Support Cabinet Comprising;
5 x "Dell", Model: Precision 390 Personal Computers;
2 x "Cisco", Model: Catalyst 2960 Switches;
"Belkin", Model: 8-KVM Switch;
"Dell", Model: PowerEdge 860 Server;
"AFC", Fibre Optics Panel;
"MGE", Model: Pulsar EX8 Power Supply;
"MGE", Model: Pulsar 1500 Power Supply;
"Master View" Flat Screen Monitor;
"VAS" Alarm System;
5 x "Ritta" Switchboard Cabinets with Serial No's:
206328-1, 206328-2, 206328-3, 206328-4 and 206328-5;
"EMC", Model: 2064 Weigh Match Controller;
"RiHa" Heinkel Centrifuge and Hittinger Baldwin; Controller
Model: MVD2555 Flat Screen;
"Haycolec IND", Model: 3B-1/2007/06M2,
Control Room Switchboard;
"Haycolec IND", Model: MSB-3A/Q6M2,
Control Room Switch Board;
2 x Control Room Switch Boards Serial No's:
MSB-3B and MSB-3C;
3 x "Schneider" Electric Cabinets;
Centric Room Monitors;
Plasma Screen and Associated Electric Equipment
Including: Cables, Cable Connectors, Cable Trays,
Conduit Fittings, Harmonic Filters,
Switches, Isolators and Overall Controls
Ref. 4137
ROSSI (IT) - TUBE AND CLOSED PROFILE MANUFACTURING LINE - ROSSI - 1989
ROSSI (IT) - TUBE AND CLOSED PROFILE MANUFACTURING LINE - ROSSI - 1989
pipe diameter 16,75-63,5
- wall thickness 1-4 mm
- speed 120 m/ min
- capacity 25000 t/ year
Ref. 551362
