NCO STAND SEMI-CONTINUOUS BAR & SECTION MILL
14 Stand Semi-Continuous Bar & Section Mill
NCO
Input Billet: 120mm Square x 2400mm Long, Debaco-Genova Gas Fired Re-Heat Pusher Type Furnace, 3-High 400 x 1000mm Roughing Stand, 13 Stand Horizontal/Vertical Continuous Mill - Horizontal 300 x 600mmm, 260 x 600mm, 260 x 600mm, 230 x 600mm, 220 x 600mm, Vertical 230mm x 450mm, Shears, 36 7m Walking Beam Cooling Bed, Automatic Packing Line (2003).
Features:
Built: 1980 (Various Upgrades upto 2005)
Capacity: Flats 10 - 50mm Wide x 10mm Thick, 6 - 14 Squares, 8 - 14mm Rounds, Various Special Shapes
Speed: 4 - 10 m/sec (12 possible)
Ref. 11346
COMPLETE BAR MILL PLANT FOR SALE 120,000 TPY
COMPLETE BAR MILL PLANT FOR SALE
120,000 TPY
Capacity: 120.000 TPY
Raw material: 100 x 100mm to 180x180mm x 3 meter steel billets
Production: 8 mm - 32 mm rebar
12x3 - 40x10 Flats
7x7 - 20x20 Squares
Operators: 40 people / shift
Buildings
• The first building (No.1 Hall) - 125 meters long, 22 meters wide
• The second building (No.2 Hall) - 120 meters long, 19 meters wide
• Rolling Mill / Billet storage: 5050m2.
• 5 mobile cranes.
• The third building (No. 3 Warehouse) - Finished stock and Bending
ROLLING MILL (15 STANDS)
Roughing Mill – 3 Stands
• 1250 kW - 2242 amp - 993 rpm - 2005 model AC motor
• 3200 amp circuit breaker panel AEG brand
• Flywheel - 3600 kg,
Rolls - Length: 2060 mm Diameter: 510 mm
Rolls - Length: 1740 mm Width: 480 mm
Rolls - Length: 1740 mm Width: 390 mm
Intermediate Mill – 4 Stands
• 500 kW - 560 volt - 895 amp DC motor with 1000 rpm
• Rolls - Length: 1310 mm - Dia: 380 mm
• 300 kW - 440 volt - 680 amp - 1000 rpm DC motor
• Rolls - Length: 1310 mm - Dia: 380 mm
• 630 kW - 440 Volt - 1533 amp - 750/1200 rpm DC (KEMSAN DC motor)
• Rolls - Length: 1310 mm - Dia: 370 mm
• 630 kW - 440 Volt - 1523 amp - 750/1200 rpm DC (Kiripton Grampton Greaves)
• Rolls - Length: 1310 mm - Dia: 340 mm
Finishing Mill – 8 Stands
• 500 kW - 310 Volt - 1000 rpm - 1975 model Emit DC motor
• Rolls - Length: 1310 mm - Dia: 380 mm
• 300 kW - 440 volt - 680 amp - 1000 rpm - 1987 model VEM DC motor
• Rolls - Length: 1310mm - Dia: 380 mm
• 300 kW - 440 volt - 680 amp - 1000 rpm - 1966 model VEM DC motor
• Rolls - Length: 1310 mm - Dia: 380 mm
• 325 kW - 465 volt - 700 amp - 1000 rpm - 1984 model VEM DC motor
• Rolls - Length: 1310 mm - Dia: 380 mm
• 500 kW - 560 volt - 895 amp - 1000 rpm - 1975 model, DC motor
• Rolls - Length: 1310 mm - Dia: 380 mm
• 600 kW - 440 Volt - 1453 amp - 750/1200 rpm - 1999 model KEMSAN DC motor
• Rolls - Length: 1310 mm - Dia: 380 mm
• 600 kW - 440 Volt - 1460 amp - 750/1200 rpm - 2002 model KIRLOSKAR DC
• Rolls - Length: 1310 mm - Dia: 380 mm
• 600 kW - 440 Volt - 1460 amp - 750/1200 rpm - 2002 model KIRLOSKAR DC
• Rolls - Length: 1310 mm - Dia: 380 mm
Re-Heating Furnace
• Height: 2 meters - Width: 3,60 meter - Length: 26 m - Capacity: 35 tons / hour
• Fuel-oil tanks - 6 pieces
• Fuel-oil pumps
• Furnace converted to natural gas 2010.
• Natural gas installations
• Gas and Air Fittings
• Flow meters
• Oxygen sensors inside the furnace
• Inverter
• Recuperator
PLC (Process Control System)
• Temperature measurement and control
• Gas flow rate measurement and control
• Air flow rate measurement and control
• Air pressure measurement and control
• Fan outlet pressure measurement and control
• Hot air temperature measurement and control
• Furnace pressure measurement and control
• Flue gas oxygen measurement
• Furnace Capacity (max) = 35 tons / h
• Loss of scales (max) = 1% below (0,6 -, 09)
Cooling Bed
• 45 meters, length - 6 meters width
• 12 beams
• Alignment relay - 17 pieces
Bundling
Shears
Air Compressors
• ASP ATLAS COPCO compressor GA45
• ATLAS COPCO GA
• VERTICAL AIR compressors
Weigh Bridge
• 80-ton truck scale 2008 model
• Model: Loadline-2 Series: 8211 Type: Floor Mounted Size: 3x16
• Electronic and Computer
• CE Declaration of Conformity are available. (CE Declaration of conformity)
Bending Machine
• 15 kW 962 rpm motor
• Up to 12 meters long,
Induction Heater
• BEGA trademark, induction heater
• Model no: Betex 24-RSD
Oxygen Tank
• Liquid oxygen tank for cutting
• 1700 mm wide, 5000 mm length
• Capacity (L): 5000
• Year of manufacture: 1995
Transformers
• AEG (ETI) 1600 KVA
• ETITAS 1600 KVA
• ETITAS 1600 KVA
• ETITAS 1600 KVA
• AEG (ETI) 160 KVA
Cranes
• BALKANCAR 8-ton
• BALKANCAR 8-to
• CESAN 6.5-ton
CESAN 10-ton
LIGHT 5-ton
LIGHT brand 3-ton
DEMAG 3-ton x 2
LIGHT 5-ton
LIGHT 5-ton
CORAL 10-ton
CESAN 10-ton
LIGHT 5-ton
LIGHT 5-ton
LIGHTING
Mechanical Workshop
Spares
Electric Motors
Gearboxes
Rolls
Ref. 2132
IPROLAM BAR STRAIGHTENER
280 mm BAR STRAIGHTENER
Year 1980
Manufacturer : IPROLAM Romania
Condition : Installed, in operation
Specs:
Bar diameter 80 – 280 mm
Straightness of incoming bar 15 mm/m
Straightness of final bar 1mm/m
Straightening speed 10 – 30 m/min
Total weight 273 ton
Ref. 21311
WILHELMSBURGER/ SOENEN SLITTING LINE, UNGERER/LISSE/PELMA CUT-TO-LENGTH LINES, ARKU STRIP LEVELER / NAXOS-UNION ROLL GRINDERS
A)
WILHELMSBURGER/ SOENEN slitting line 27 t, coil ID 508/610 mm
maker WILHELMSBURGER/SOENEN
year 1975
strip width 300 - 1.670 mm
strip thickness 0,5 - 3,5 mm
coil weight max. 27 t
coil-Ø max. 2.000 mm
working speed max. 200 m/min.
working direction left → right
Equipment:
coil carriage
decoilerl
mandrel-Ø (with segments): 508/610 mm
strip edge control
coil opener/ pinch roll unit/ leveller/crop shear
slitting stand (3 interchangeable stands)
shaft-Ø: 220 mm
blade-Ø: 340 mm
scrap winder
looping pit equipment
felt brake/brake stand
recoiler with separating arm and mandrel support
mandrel-Ø: 508/610 mm
coil carriage
1-arm turnstile
electrics
hydraulics
B)
SIRP slitting line 15 t, coil ID 508/610 mm
maker SIRP
year 1985
strip width 250 - 1.550 mm
strip thickness 0,3 – 3 mm
slit width min. 15 mm
no. of slits at 3 mm 9
reference material
(tensile strength) 500 N/mm²
coil weight max. 15 t
coil-Ø max. 1.500 mm
speed max. 120 m/min.
working direction right → left
C)
SACMA slitting line 27 t, coil ID 420 - 850 mm
maker SACMA
year 1993/2002
strip width 300 – 1.500 mm
strip thickness 0,4 - 4 mm
no. of slits / material strength 30 / 2 mm
slit width min. 40 mm
reference material (tensile strength) 340 N/mm²
coil weight max. 27 t
coil-Ø max. 2.100 mm
line speed max. 150 m/min.
working direction left → right
Equipment:
underfloor coil carriage
double-cone decoiler with hold-down device and shifting base plate
mandrel-Ø (with segments): 420 - 850 mm
coil opener/pinch roll unit/crop shear
slitting stand (2 interchangeable stands)
shaft-Ø: 235 mm
blades-Ø: 422 - 373 mm
2 scrap winders
carry-over carriage with strip brake and deflector roll
recoiler with separating arm and stripper plate
mandrel-Ø: 508 mm
overfloor coil carriage
electrics
D)
BURGHARDT & SCHMIDT slitting line 3 t, coil ID 406/508 mm
maker BURGHARDT & SCHMIDT
year ca. 1985
strip width 100 - 400 mm
strip thickness 0,1 – 2 mm
slit width min. 4 mm
no. of slits at 0,8 mm 7
reference material
(tensile strength) 500 N/mm²
coil weight max. 3 t
coil-Ø max. 1.500 mm
speed max. 100 m/min.
working direction right → left
E)
UNGERER/ LISSE/ PELMA cut-to-length line 20 t, coil ID 450 - 750 mm
maker UNGERER/LISSE/PELMA
year 1976/1988/1998/2006/2011
strip width 600 - 1.650 mm
strip thickness 0,4 – 3 mm
sheet bar length 500 - 7.000 mm
coil weight max. 20 t
coil-Ø max. 1.800 mm
speed max. 50 m/min.
working direction right → left
Equipment:
decoiler
cone-Ø: 450 - 750 mm
coil opener/pinch roll unit
cross-cut shear (crop shear)
foil processing
leveller I
no. of levelling rolls: 23
leveller II
no. of levelling rolls: 17
cross cut shear
acceleration belt
stacker
electrics
hydraulics
F)
SOENEN/ SCHNUTZ cut-to-length line 27 t, coil ID 508/610 mm
maker SOENEN/SCHNUTZ
year approx. 1985
strip width 250 – 1.600 mm
strip thickness 0,3 – 3,3 mm
reference material (strength) 610 N/mm²
plate length 300 - 6.000 mm
coil weight max. 27 t
coil-Ø max. 2.000 mm
speed max. 100 m/min
working direction left → right
Equipment:
turnstile
coil carriage
decoiler with hold-down device, shifting base plate
mandrel-Ø (with segments): 508/610 mm
coil opener / pinch roll unit / crop shear
4-hi leveller I
no. of levelling rolls: 23
levelling roll-Ø: 36 mm
4-hi leveller II
no. of levelling rolls: 23
levelling roll-Ø: 65 mm
edge trimmer
scrap winder (bundle)
looping pit equipment with carry-over table
pinch roll unit
cross-cut shear
acceleration belt with scrap winder
stacker
electrics
hydraulics
G)
ARKU strip leveller RM 3025.4/21 rolls, Ø 30 mm
maker ARKU
type RM 3025.4/21
year 1983
strip width max. 250 mm
strip thickness 0,4 - 5 mm
reference material (strength) 400 N/mm²
speed approx. 3,5 - 20 m/min.
working direction any
The leveller is equipped as follows:
no. of levelling rolls: 21
levelling roll-Ø: 30 mm
supports on top/ at the bottom: 4
H)
NAXOS – UNION roll grinder WT140 x 6.500
maker NAXOS-UNION
type WT140 x 6.500
year 1970
workpiece-Ø 150 – 1.400 mm
workpiece length max. 6.000 mm
workpiece weight between centers max. 10 t
workpiece weight within steadies max. 55 t
I)
WALDRICH roll grinder WS III
maker WALDRICH
type WS III
year 1974/1998
workpiece-Ø max. 950 mm
workpiece length max. 5.000 mm
workpiece weight
- between centers 10 t
- within steadies 16 t
Ref. 21313
