LOOPCO 18" x 3.50" x 7500# SLITTING LINE, YEAR 1987
MATERIAL: STAINLESS
GRADES: 200 - 300 - 400 SERIES
WIDTH: 18"
COIL WEIGHT: 7,500 LBS.
COIL DIMENSIONS (ENTRY): 16" TO 20"
(EXIT): 8", 12", 16", 20"
LINE DIRECTION: RIGHT TO LEFT
CONSISTING OF THE FOLLOWING:
-MANDREL UNCOILER: FORTE
23" MANDREL FACE WIDTH
16" - 20 " EXP. RANGE
HYDRAULIC EXPANSION
(4) SEGMENT MANDREL
48" O.D. MAX.
OVERARM HOLDDOWN
AC MOTOR FEEDUP
FAWICK WATER COOLED BRAKE
SLIDING BASE
PAPER WINDER SHAFT, AC MOTOR DRIVEN
-STEEL STRIPPER RING SLITTER HEAD: LOOPCO
REMOVABLE HEAD
3.50" DIA. x 20" FACE ARBORS
ENTRY PASSLINE ROLLS
AUTOMATIC EDGE GUIDE SENSOR
ENTRY ROLLER SIDE GUIDES
EXIT PASSLINE ROLL
HYDRAULIC MOTOR FEED UP
S/N: 6401D12737A
-RECOILER:
20" DIA. x 25" FACE DRUM
MANUAL EXPANSION
MATERIAL SLOTS (NO GRIPPER)
HYDRAULIC PUSHOFF
DC MOTOR DRIVE W/BLOWER
REPLACEABLE DRUMS INCLUDED
-FREE STANDING OVERARM SEPARATOR
-SCRAP BALLER
APPROX. 20" DIA. x 16" WIDE SCRAP BALL CAPACITY
HYD. CYLINDER ARBOR RETRACT
HYD. CYLINDER SCRAP BALL EJECT
15 HP RELIANCE AC MOTOR DRIVE
1760 RPM, 230/460 V
THRU DODGE MAXUM REDUCER
-2 ARM TURNSTILE
4,000 LB CAPACITY EACVH ARM
MANUAL ROTATION
Ref. 11121
RUESCH 36" x 4.00 x 20,000# SLITTING LINE
GAUGE RANGE: 0.005" - 0.090"
WEIGHT CAPACITY: 20,000#
MAXIMUM WIDTH: 36.5"
COIL I.D.: IN: 14" - 24"
OUT: 16" CORES
CONSISTING OF:
-ENTRY COIL CAR: RANGER (NEW IN 1984)
20,000# CAPACITY
64" O.D. CAPACITY
SELF ENCLOSED HYDRAULIC POWER UNIT
7" BORE HYD. LIFT CYLINDER
4" DIA. CAMROLLS
43" WIDE DECK W/POWERED ROLLERS
RETRACTABLE CABLE REEL
APPROX. 14" FROM FLOOR TO BOTTOM OF "V" CRADLE
-UNCOILER: RANGER
20,000# CAPACITY
37.5" FACE MANDREL
APPROX. 14" TO 24" ID W/BOLT ON PADS
HYDRAULIC EXPANSION
HYD. MOTOR THREADING DRIVE
SLIDING BASE
64" O.D. CAPACITY
POWERED HOLDDOWN ROLL
WICHITA AIR BRAKE
43" PASSLINE FROM FLOOR TO CENTER OF MANDREL
-SLITTER HEAD: RUESCH
N2255, S/N: 5579
REBUILT MID 1990'S
4.00" DIA. x 37" FACE ARBORS
HYD. JET NUTS
PARALLEL ARBOR ADJUSTMENT
ENTRY TENSION PAD
ENTRY PASSLINE ROLLS
EXIT PASSLINE ROLLS
40 HP RELIANCE DC MOTOR DRIVE W/BLOWER (NEW IN 1996)
1750 RPM, 500 V
DRIVE SPEED: 750 FPM MAX. W/8" O.D. KNIFE
FULL COMPLEMENT OF SHIMLESS TOOLING
KNIVES - ONE SET (60 KNIVES) 0.187" WIDE x 7.75" DIA.
SPACERS - 0.125"-16, 0.109"-32, 0.140"-30, 0.187"-25, 0.500"-20
0.062"-47, 0.093"-38, 0.250"-30, 0.750"-8, 0.494"-14
1"-24, 2"-12, 3"-12
-DUAL OSCILLATING SCRAP WINDERS:
12" WIDE x 20" DIA. BALL CAPACITY
(2) 1.5 HP DC MOTORS, 1050 RPM, 240 V
OSCILLATE WIND
-RECOILER: RUESCH
20,000# CAPACITY
15" DIA. SLIP CORE DRUM (NEW IN 1996)
39" DRUM FACE
40 HP DC MOTOR, 1750/2100 RPM, 500 V
GEAR REDUCER WITH 25.63:1 RATIO
45.5" PASSLINE FROM FLOOR TO CENTER OF DRUM
-FREE STANDING OVERARM SEPARATOR (NEW IN 1980)
-EXIT TURNSTILE: PRO ECO (NEW IN 1984)
MODEL: TP-2020-48-36
S/N: AW 1004-00-84
2 ARMS
20,000# CAPACITY EACH ARM
41" ARM LENGTH
6" WIDE x 11.5" DEEP CHANNEL FOR "C" HOOK USE
52.5" FROM FLOOR TO TOP OF ARM
POWERED ROTATION VIA HYDRAULIC MOTOR
-HYDRAULIC POWER UNIT
-SIEMENS DC DRIVE W/MANUAL AND ELECTRICAL DRAWINGS
-ISOLATION TRANSFORMER
Ref. 11122
STANAT 24" x 4.50" x 20,000# SLITTING LINE
-LOOPCO UNCOILER:
20,000# CAPACITY
16" - 20" ID
HYDRAULIC EXPANSION
(4) SEGMENT MANDREL
SLIDE BASE
FEED UP MOTOR
WICHITA WATER COOLED BRAKE
HOLDDOWN ROLL
-STANAT SLITTER:
MODEL: S-360-24 x 4.5
S/N: 131280
4.50" DIA. x 24.5" FACE ARBORS
ENTRY PASSLINE ROLLS
DUAL SET OF ENTRY PINCH ROLLS
JACKSCREW ADJUSTMENT OF TOP ROLLS
PARALLEL ADJUSTMENT OF TOP ARBOR
DC DRIVE MOTOR
LESS TOOLING
-COILTECH TENSION STAND:
28" FACE
DRAG AND ROLL TYPE DESIGN
GRIP AND PIT CROSS OVER
ONE COMPLETE WITH WICHITA BRAKE
-STAMCO RECOILER:
20,000# CAPACITY
16" DIA. x 32" FACE DRUM
HYDRAULIC GRIP AND EXPAND
DUAL DIRECTION GRIPPER
HYDRAULIC PUSHOFF
OVERARM SEPARATOR
40 HP DC MOTOR
23.57:1 RATIO REDUCER
-CONTROL CABINET
-LINE DIRECTION: RIGHT TO LEFT
-REMOVED AND IN STORAGE:
Ref. 11123
MINI SLITTING LINE WIDTH 450MM, THICKNESS 2.0MM
SLIT MATERIAL : CR,GI COLOR & SUS
THICKNESS : 0,3 – 2,0MM/1,2MM AT SUS
T,S : MAX 65Kg/mm2
WIDTH : 200 -450MM
COIL I,D : 508MM
O,D : 1500MM
WEIGHT : MAX 5,000KGS
LINE SPEED : MAX 150MPM
THREADING SPEED :10M/MIN
SLIT WIDTH : MIN 50MM
NO OF CUTS : MAX 10CUTS
DRIVE :DC DRIVE
OPERATION FOR SLIT :VOLUME CONTROL TYPE
Ref. 11124
