CAUFFIEL 62” x .250” to .020” x 50,000#, HEAVY-DUTY PRESS FEED LINE
Condition: Installed, Ready for Production
Maximum Speed: 75 SPM with 12” Feed
30 SPM with 48” Feed
Maximum Coil Weight: 50,000#
Accuracy of Feed: .005”
Maximum Coil Width: 64”
Minimum Coil Width: 6”
Maximum Coil O.D.: 76”
Coil I.D.: 20” or 24”
1) Coil Loader with 24” of Vertical Lift
2) 50,000# Single-End Hydraulic Expanding Mandrel Uncoiler with Air Controlled Drag Brake and Forward and Reverse Power Feed-Up
3) Hydraulic Actuated Peeler and Hold Down Roll Combination
4) Leveler Equipped with:
• (2) Sets of 8” Diameter Pinch Rolls with Hydraulic Pressure Control
• 4” Backed-Up Leveling Rolls with Hydraulic Bank Type Adjustment
• Infinitely Variable Speed Drive
• Loop Type Cantilever Section
5) Side Swing Table to Feed Material from Leveler to Digital Feed Rolls
6) Digital Feed Rolls Equipped with Basket Cantilever Section Equipped with:
• Hydraulic Adjustable Edge Guide
• Eurotherm Drive Integrated with Excel of Detroit (Representative of Reliance, Cleveland, Ohio) Installed in 2004
• 8” Diameter Digital Feed Rolls with Air Pressure Control Equipped with (Practically New) Infinitely Variable Digital Drive with State-of-the-Art User Friendly Control Console to Feed Any Length in .005” Increments
Ref. 101225
DALLAS 52” x .250” to .020” x 50,000# HEAVY DUTY PRESS FEED LINE
(1) USED DALLAS 52” x .250” to .020” x 50,000# HEAVY-DUTY PRESS FEED LINE
Condition: Installed, Ready for Production
Maximum Speed: 75 SPM with 12” Feed
30 SPM with 48” Feed
Maximum Coil Weight: 50,000#
Accuracy of Feed: .005”
Maximum Coil Width: 52”
Minimum Coil Width: 6”
Maximum Coil O.D.: 76”
Coil I.D.: 20” or 24”
1) Coil Loader with 24” of Vertical Lift
2) 50,000# Single-End Hydraulic Expanding Mandrel Uncoiler with Air Controlled Drag Brake and Forward and Reverse Power Feed-Up
3) Hydraulic Actuated Peeler and Hold Down Roll Combination
4) Leveler Equipped with:
• (2) Sets of 8” Diameter Pinch Rolls with Hydraulic Pressure Control
• 4” Backed-Up Leveling Rolls with Hydraulic Bank Type Adjustment
• 50 HP Infinitely Variable Speed Drive
• Loop Type Cantilever Section
5) Side Swing Table to Feed Material from Leveler to Digital Feed Rolls
6) Digital Feed Rolls Equipped with Basket Cantilever Section Equipped with:
• Hydraulic Adjustable Edge Guide
• Eurotherm Drive Integrated with Excel of Detroit (Representative of Reliance, Cleveland, Ohio) Installed in 2002
• 8” Diameter Digital Feed Rolls with Air Pressure Control Equipped with (Practically New) 30 HP Infinitely Variable Digital Drive with State-of-the-Art User Friendly Control Console to Feed Any Length in .005” Increment
Ref. 101226
FUCHS TYPE FINGER SHAFT, 130 TONS, ELECTRIC ARC FURNACE
130 TON FUCHS ELECTRIC
ARC FURNACE(ref UB 99-49)
• GENERAL SPECIFICATIONS:
• CAPACITY (TONS): 130 Tons (117.934 mt)
• TYPE: Finger Shaft
• FURNACE DESIGN: Tilt Type
• SHELL DIAMETER: 20 Feet (6.096 m)
• ELECTRODE DIAMETER (INCHES): 14 Inches (355.600
mm)
• PITCH CIRCLE: 25.620 Inches (650.748 mm)
IDE WALL: Water Cooled
ROOF: Water Cooled
ROOF RING: Water Cooled
ELECTRODSE CABLES: Water Cooled
ELECTRODE ARMS: Water Cooled
ROOF SWING: Hydraulic
FURNACE TILT: Hydraulic
TRANSFORMER: Quantity (2) 38 MVA each
TRANSFORMER MANUFACTURER: ABB
APPROXIMATE OVERALL DIMENSIONS (FEET):
LENGTH (FEET): 13.120 Feet (3.999 m)
WIDTH (FEET): 11.250 Feet (3.429 m)
HEIGHT (FEET): 13.750 Feet (4.191 m)
ELECTRICAL CONTROL:
ELECTRICAL CONTROL MANUFACTURER: ABB
COMMENTS: 1 spare Transformer, 1 control pulpit, 7 Ladles
with
100 Ton Capacity, 1 Ladle Stirring System, 1 Ladle
breakdown station, 2 Scrap Cars with scales, 3 scrap
buckets (5300 cu-ft) Hydraulic systems, Water
Cooling systems, Exhaust Duct (Bag house has been
removed)
Ref. 101227
CONCAST STANDARD 3 STRAND BILLET CASTER
3 STRAND CONCAST STANDARD BILLET CASTER
MANUFACTURER: Concast Standard
• AGE: 1996
• GENERAL SPECIFICATIONS:
• CASTER MANUFACTURER: Concast
• NUMBER OF STRANDS: 3
• MATERIAL CAST: Carbon Steel
• PRODUCT CAST: Billet
SECTION CAST SIZES:
LENGTH MINIMUM (INCHES): 360 Inches (9,144.000 mm)
LENGTH MAXIMUM (INCHES): 576 Inches (14,630.400 mm)
WIDTH MAXIMUM (INCHES): 6.250 Inches (158.750 mm)
HEIGHT MAXIMUM (INCHES): 6.250 Inches (158.750 mm)
LADLES SIZE (TONS): Ewing 100 Tons
CAPACITY (TPY): 750,000 Tpy
Ref. 101228