VARIOUS FORGING PRESSES, HAMMERS & UPSETTERS FOR SALE
Hot forging press VORONEZH KB 8042 1600t
Year: 1985
Condition: full completed, already dismantled, ready for quick dispatch
Tech data:
Maximum force ton-force 1600
Slider stroke length mm 300
Slider strokes per minute 75
Maximum distance between table and slider (in lower position of slider) mm 660
Size of adjustment of distance between a table and slider mm 10
Price: 115.000 EURO FOB Black Sea port.
Steam-air forging hammer KRAMATORSK M2147 5t
Year: 1982
Condition: excellent condition, full complete, already dismantled and delivered to a port, ready for a quick dispatch
Tech data:
Nominal weight of dropping parts
(taking into account that mass of the upper tool equal 500 kg), kg 5000
Actual mass of dropping parts without the upper tool, kg 5080
Effective kinetic energy of dropping parts kgs.m 12500
Max course of the hammer block, mm 1300
Min height of tools without shanks, mm 400
Price: 115.000 EURO FOB Black Sea port.
HORIZONTAL FORGING UPSETTER B1139 A 800t
Year: 1988
Condition: excellent, almost unused
Tech data:
Nominal effort 800 tons
Stroke of moving matrix 180 mm
Full stroke of extruding slider 380 mm
Working stroke of extruding slider 250 mm
Back stroke of extruding slider, matrix are closed 130 mm
Distance between extruding slider and matrixes 140 mm
Weight of machine 80 t
Price: 57.500 EURO FOB Black Sea port.
Horizontal forging machine 3000t
Condition: full complete, almost unused
In 2008 there was made a full recondition.
Tech data
Max. pressure on extrusion slider puncheon 3000 ton
Max. diameter primary soft steel feed bar 225 mm
Extrusion slider stroke 750 mm
Clench stoker of extrusion slider 490 mm
Clamping matrix /left/ (stamp) stroke 350 mm
Weight of the machine 375.7 ton
New price: 325.000 EURO FOB Baltic Sea port.
Hot forging press VORONEZH AKKG 8040 1000t (heavy duty edition!)Year: 1987Condition: excellent condition, complete
Tech data:
Maximum force ton-force 1000
Slider stroke length mm 380
Slider strokes per minute 40
Maximum distance between table and slider (in lower position of slider) mm 710
Adjustment of distance between a table and slider mm 10
Table overall dimensions: mm
- from left to right 930
- from front to rear 1000
Press weight kg 90 000
Price: 95.000 EURO FOB Black Sea port.
Steam-air forging hammer KRAMATORSK M2150 10t
Condition: full complete, no any cracks, already dismantled,
ready for a quick dispatch
Tech data:
Weight of a dropping part, kg 10,000
Impact energy, Kgm 26.000
Courses / min 30
Max. distance between a table and the slide block, mm 1400
The enclosed altitude, mm 1000
Slide block sizes, mm 1180
Size of die bed, mm 1320
Die holder size, mm 450
Hammer size, mm 4400x 2700
Altitude over floor level, mm 7238
Top hammer weight, kg 200.000
Weight, kg 284.000
Price: 375.000 USD FOB Black Sea port.
Trimming and calibration press ERFURT PKZe 1250 (3 pcs.)
Year: 1988
Good condition, full complete
Tech data:
Maximum ram force kN 12500
Slide stroke mm 500
Slide adjustment mm 215
Maximum shutheight between bolster plate and slide
(stroke down, adjustment up) mm 860
Bed area (width x depth) mm 1600 x 1800
Slide area (width x depth) mm 1300 x 1400
Price: 95.000 EURO FOB(for each)
Trimming press VORONEZH KB 9538.01 630t
Year: 1985
Condition: working, full complete by mechanical parts
Tech data:
Maximum force ton-force 630
Slider stroke length mm 420
Slider strokes per minute 20
Shut height 750 mm
Table overall dimensions: mm
- from front to rear 1250
- from left to right 1250.
Price: 53.500 EURO FOB
Steam-air forging hammer KRAMATORSK 17KP 5t
Condition: full retrofit in May, 2011, full complete, new rod, ram, guides
Year: 1984
Tech data:
Nominal weight of dropping parts
(taking into account that mass of the upper tool equal 500 kg), kg 5000
Actual mass of dropping parts without the upper tool, kg 5080
Effective kinetic energy of dropping parts at full consecutive blows kgs.m 12500
Max course of the hammer block, mm 1300
Min height of tools without shanks, mm 400
Distance between columns, mm 800
Price: 130.000 EURO FOB
Reduce rolls CA1335
Year: 1995
Condition: full retrofit, renew, guarantee, excellent, full complete
new bronze, hydraulic, pneumatic. Electric should be replaced.
Tech data
Capacity 80 t
Nominal distance between axis, 320 mm
Nominal force, kN 800
Size of tool roll, 180 mm diameter, length 280 mm
The frequency of rotation of roll, min-1 65
Adjustment distance between axis, 3 mm
Diameter of initial blank: not more than 95 mm
Power of main drive motor, 31,5 Kw.
Price: 36.300 EURO EXW.
Knuckle joint press
PINSK KB8336 400 t
YOM: 1988
New in 2012.
Condition: Fully retrofitted by mechanical parts and lubrication system. Electric should be installed at your side.
Tech data
Maximum force: 400t
Table dimensions : 500x500 mm
Ram stroke : 130 mm
Number of strokes per minute : 50
Distance between a plate under a stamp and slider: 375 mm.
Price: 30.000 EURO FOB Baltic Sea port
Knuckle Joint press Barnaul KB8340 1000t
YOM: 1985
Condition: Excellent, very very small work, nearly new. This press from mobilization reserve.
Tech data
Rated force TN 1000
Slide stroke, mm 170
Frequency of the slide strokes per min 32
Bed dimensions, mm 800x800
Slider dimensions (FB), mm 630
Distance between table and punch plate
of slider in case of upper table location, mm 470
Adjustment, mm 16
Weight, kg 25500
Dimensions, mm 2950/1950/4090.
New pice: 47.500 EURO FOB Black Sea port.
Ref. 81282
LASCO VP 1000 TONS HYDRAULIC PREFORMING AND TRIMMING PRESS
Press capacity 1000 t
Stroke continuously adjustable max. 600 mm
Daylight 1500 mm
Table size (left to right) 1230 mm
Table size (front to back) 1200 mm
Return force 80 t
Die height min. 895 mm
Approach speed 400 mm/sec.
Pressure speed 4 - 40 mm/sec.
Return speed 400 mm/sec.
Upper ejector (power) 31,5 t
Upper ejector (stroke) 400 mm
Driving power 2 x 132 kW
Electrics 230 V / 50 Hz
Total weight 90 t
Mode of operation Electro oil-hydraulic
Year of manufacturing 2002
Ref. 81295
B1141 1250 TONS HORIZONTAL FORGING UPSETTER
Condition: good and working condition
Tech data:
Max. diameter of work piece, mm 140
Max. diameter of upset flange, mm 180
Upset slide nominal force, kN 12500
Force on clamping slide with dies closed, kN 12500
Upset slide stroke, mm 460
Upset slide stroke with dies closed, mm 310
Slide continuous idle strokes per minute, min 32
Electric motor power, kW 75
Machine overall dimensions, mm
length 6400
width 4360
height 3760
Weight 135000
Ref. 812109
HYDRAULIC 6000 TONS OPEN DIE FORGING PRESS
New hydraulic hot-forging press 6000t
Mechanical part - complete.
Hydraulic part - didn't make. Must be installed 14 pumps (every pump force: forging pressure - 32MPa, compression pressure - 40MPa; every pump must have electric motor (power 500KW).
Working fluid - oil.
1. DESIGNATION AND SPECIFICATION FOR HIGH-SPEED
HYDRAULIC OPEN DIE FORGING PRESS
WITH THE CAPACITY OF 6000T
1.1. High-speed hydraulic open die forging press with the capacity of
60/70МN is intended to produce by open die forging the forged parts of
cube-, plate-, shaft-, shell-, ring-type and the like made of carbon and
alloyed steel grades as well as of special alloys within the abovementioned
forging capacity. The press may be used for upsetting and
other forging operations.
1.2. Specification for the press is shown in table 1.
Table 1
Description Value
1 Nominal force of press, MN (t)
First stage, MN (t)
Second stage, MN (t)
Third stage, MN (t)
60 (6000)
20,3 (2030)
40,6 (4060)
60,9 (6090)
2 Maximum upsetting force of press, MN (t) 70 (7000)
3 Main cylinder
3.1 Cylinder force, MN (t) 20,3 (2030)
3.2 Working fluid pressure, MPa 32
3.3 Max. upsetting cylinder force, MN (t) 23,7 (2370)
2.4 Upsetting working fluid pressure, MPa 37,3
3.5 Working stroke, mm 2600
3.6 Number of cylinders 3
4 Max. stroke of moving slide, mm 2600
5 Distance between the table and moving slide (open
height), mm
6000
6 Permissible eccentricity at forging with the force of
60MN (6000t), mm
300
7 Table work surface dimensions, mm 3200х6000
8 Daylight between stroke limiters, mm 1900х4600
9 Table stroke to each side, mm 3000
10 Table movement cylinder
10.1 Cylinder force, MN (t) 4,15 (415,0)
10.1.1 in rod end, MN (t) 2,04 (204,0)
10.1.2 in head end, MN (t) 4,15 (415,0)
10.2 Working fluid pressure, MPa 30
10.3 Working stroke, mm 6000
HIGH-SPEED HYDRAULIC OPEN DIE FORGING PRESS WITH THE CAPACITY OF 60/70 MN
WITH RAIL BOUND MANIPULATOR OF 20mt CAPACITY
Page
2
Description Value
10.4 Number of cylinders 1
11 Return cylinder
11.1 Cylinder force, MN (t) 2,12 (212,0)
11.2 Working fluid pressure, MPa 30
11.3 Working stroke, mm 2600
11.4 Number of cylinders 4
12 Tool fixing mechanism cylinder
12.1 Cylinder force, MN (t) 0,03 (3)
12.1.1 in rod end, MN (t) 0,02 (2)
12.1.2 in head end, MN (t) 0,03 (3)
12.2 Working fluid pressure, MPa 2
12.3 Working stroke, mm 400
12.4 Number of cylinders 2
13. Maximum press speed at 60 MN, mm/s 65
14. Maximum press speed at 70 MN, mm/s 45
15. Maximum advance speed, mm/s 210
16. Maximum return speed, mm/s 210
17. Press strokes per minute, max 100
18. Maximum shifting speed, mm/s 250
19. Minimum shifting speed, mm/s 5
20.Overall dimensions of press proper, mm
width
length
height
the same above floor level
8580
22225
19080
14820
14 Weight of press proper, t 1412,519
NOTES:
The values of the above forces are nominal and they are determined
at maximum working fluid pressure.
Ref. 812110
