CM 3150 TYPE, SIMILAR WITH HUTA ZYGMUNT, DROP FORGING HAMMER
Technical specifications:
Maximum energy of impact at maximum stroke: 10000 kgm
Ram weight: 3150 kg
Mode of operation: Pneumatic
Stroke: 900 mm
Number of blows per minute: 90
Working pressure: 5 - 7 bar
Total weight: 105 t
Condition: Under power. Complete, in very good condition. It can be inspected under working conditions.
Put into operation: 1980.
Ref. 712166
GFU MACHINENBAU, RD230/500 HOV AUTOMATED SWAGIING MACHINE FOR TRAILER AXLES
Manufacturer: GFU Machinenbau , Germany
Year : 1992
Condition: original installation
Technical specs:
Hammer forging power: 5000 KW
Hammer stroke: 28mm
Forging speed: 535 stroke/min
Feeding speed: 0-10 m/min
Hammer motor: 90 KW
Entry tube diameter: 230 mm
Entry tube length : 3500 mm
Hydraulic driving power:100KW
Ref. 8121
RUTHNER UMT MR 3-6 FORGING MANIPULATOR
Ultimate load 3 t
Load moment 6 mt
Opening of the tongs1000 - 1200 mm
Height of the tongs 400 mm
Width of the tongs 900 mm
Length of the tongs1200 mm
Driving power 30 kW
Electrics 400 / 690 V
Total dimensions 2850 x 5200 x 3100 mm (B x L x H)
Total weight 16,4 t
Mode of operation oil-hydraulic
Ref. 812148
EUMUCO SP 300C, 3150 TONS HOT FORGING PRESS
Manufacturer : Eumuco
Model : SP 300C
Year : 1970/overhauled in 2008
Capacity : 3150 ton
Specification
Max. capacity-3150 Ton
Stroke-350 mm
SPM-55
Max distance table ram-1140 mm
Inside width-1240 mm
Table size-1190 x 1960 mm
Ram size-1120 x 1200 mm
Adjustment of table-22.5 mm
Upper ejector-60 mm
Lower ejector-60 mm
Air pressure-6 bar
Voltage-440 V, 60 hz
Main drive motor-135 kW
CONDITION: Very good. Major overhaul in 2008. Inspect in plant, running.
Ref. 712164
