SMERAL LKZ 2500 P FORGING PRESS
Year: 1988
mechanical press
Press force: 2500 t
Stroke: 320 mm
Installation height: 905 mm
Distance between uprights: 1410 mm
Table size: 1340 x 1470 mm
Raml clamping: 1320 x 1100 mm
Adjustment of the ram 10 mm
Slide stroke - 320 mm fixed
Stroke rate 65 1/min
Total power requirement 130 kW
Machine weight 140 tons
Space requirement approx 4.00 x 4.00 x 7.39 m
low working hours!
The press was hardly used and is due to careful preservation in nearly new condition
Ref. 712129
AJAX 6" MECHANICAL UPSETTER
Specifications
Mode of operation : mechanical
Stroke : 457 mm
Strokes min^ 1 : 27
Shutheight : 914 mm
Driving power : 55 kW
Total weight : 135 t
Opening of clamping jaws : 203mm
Ref. 712130
AJAX 8INCH UPSETTER
One (1) Used Ajax 8Inch Upsetter
Max forging tonnage: 1,800 tons
Max rated bar dia: 8"
Ram stroke: 24"
Grip opening: 12.5"
Die grip tonnage: 1,300 tons
Strokes per minute: 23 spm
Die height & thickness: 46" & 13"
Die seat length: 32"
Max tool & die space: 71"
Machine net weight: 492,000 lbs
* Air Clutch
Ref. 712131
LASCO VPA 1600 / 1800 ELECTRO-OIL OPEN DIE HYDRAULIC PRESS
CATEGORY: Presses, Hydraulic Forging
MODEL: VPA 1600 / 1800
CAPACITY: 2000 ENGLISH TONS / 1800 MP
SPEED: PRESSING SPEED 5.12 in/sec (130 mm/sec)
RAM / SLIDE STROKE: 37.40 in. 950.00 mm.
SHUT HEIGHT (RAM / SLIDE DOWN, ADJUSTMENT UP): 49.21 in. 1250.00 mm.
MAXIMUM DISTANCE BETWEEN RAM /SLIDE AND BED 86.61 in. 2200.00 mm.
DISTANCE BETWEEN COLUMNS: 59.06 in. 1500.00 mm.
STROKE OF UPPER KNOCKOUT: 2.76 in. 70.00 mm.
FORCE OF UPPER KNOCKOUT: 4 X 24.59 Ton 4 X 245 kN
STROKE OF LOWER KNOCKOUT: 15.75 in. 400.00 mm.
FORCE OF LOWER KNOCKOUT: 98.35 Ton 980 kN
RAM / SLIDE WIDTH: 57.09 in. 1450.00 mm.
RAM / SLIDE DEPTH: 73.62 in. 1870.00 mm.
BED WIDTH: 58.27 in. 1480.00 mm.
BED DEPTH: 78.74 in. 2000.00 mm.
ELECTRIC MOTOR POWER: 7.33 HP 5.50 Kw.
POWER 3PHASE / 50-60 Hz / 200 - 500 Volts: existing
SPECIAL FEATURES OR ADDITIONAL ITEMS: RETURN FORCE OF RAM 98.35 Ton (980 Kn), IDLE SPEED OF RAM: LIFT 25.59 in/sec (650 mm/sec) DOWN 25.59 in/SEC (650 mm/sec), MAIN MOTORS 6 X 247 HP (185 Kw), CONTROL MOTORS 1 X 13.3 HP (10 Kw) AND 2 X 26.6 HP (20 Kw), COOLING MOTOR 7.3 HP (5.5 Kw)
MACHINE HEIGHT: 265.00 in. 6725.00 mm.
MACHINE WEIGHT: 451000 lbs. 205000 Kg.
CONDITION: GOOD - BUT DOES REQUIRE NEW ELECTRICAL CONTROLS
Ref. 712132
