WALDRICH SIEGEN WST IV H 70 X 13000 CNC ROLL GRINDER
CNC Roll Grinder WALDRICH SIEGEN
Type : WST IV H 70 X 13000, Year 1981/2007 new control and electric
technical data
working range
max. roll- mm 2.000
min. roll- mm 0
max. length of roll mm 13.000
max. weight of roll t 70
Headstock with starter motor
main motor kW 73,55
speeds of main motor, infinitely variable rpm 450 -1.800
revolutions at face plate 1. step
2. step rpm 5 – 50
50 - 500
traverse adjustment mm 600
grinding carriage
grinding spindle speeds rpm 450 – 1.800
cutting speed m/s 45
grinding spindle motor kW 40
travel distance, longitudinal mm 12.600
feed, infinitely variable mm/min 60 – 4.000
travel distance, traverse mm 650
rapid adjustment mm/min 400
continius infeed, abnormal mm/min 0,00375 – 1,125
final infeed mm/stroke 0,0056 – 0,056
manual adjustment, rough
fine mm/rev. 0,1
0,025
abrasive wheel
dia. mm 800
widths mm 90
boring mm 304,8
tail stock
adjustment of quill mm 260
adjustment way, traverse mm 600
adjustment way, longitudinal mm 13.400
main dimensions
length of machine mm 20.200
width of machine mm 4.800
height of machine mm 2.200
weight of machine aprox. kg 85.000
Electric voltage V/Hz 575/60
technology and accessories
• hydrostatic guide ways in z and x axis and grinding spindle
• new electric cabinet in 2007
• new CNC control ALLEN BRADLEY 1395 in 2007
• complete new cable for the machine in 2007
• two bed system, grinding and work piece side are separately
• bed with grinding carriage, operators platform and CNC control unit
• automatic grinding wheel DIA compensation (compensation of speed)
• automatic reversing of z-axis when length (limit) of roll body will reached
• telescopic way covers for z axis
• 2 steady rest 200 – 500 mm
• 2 hydrostatic steady rest 755/780/860/890 mm
• 1 supporting steady, 2 quill design, 175 – 1.050 mm
• work piece measuring device
• belt grinding device
• 15 abrasive wheel centres
Ref. 11320
WAGNER DXL 1300X12000 MM DORTMUND HEAVY DUTY CENTRE LATHE
WAGNER DORTMUND Heavy Duty Centre Lathe
MODEL : Capacity DxL 1300x12000 mm
Controller :
conventional
Specification :
In working condition, complete.
max diam above bad frame - 1300 MM
max diam above carriage - LOWER/UPPER PART 1060/960 MM
no off linnets - 1 OFF CLOSED AND 2 OFF OPENED TYPE
max weight between admissible centers - NOT MENTIONED IN THE MANUAL
power of main motor - 30 HP
no and type of container needed - 2OFF 40'DV CONTAINERS
Year Of Manufacture 1965
Ref.11364
LAEPPLE ZEH 500 (UVV) 91 DOUBLE-COLUMN PRESSE
LAEPPLE / SE 500 (UVV) / 1976 / 91 Double-Column Presse
make: LAEPPLE
type: ZEH 500 (UVV)
year of make: 1985
description:
with oilhydr. drive, hydr. and electr. control according to the German Safety Regualtions for manual put-in ("UVV"),hydr. drawing cushion in table and ram, ram interlocking, two-hand operation, electrical cabinetour list price is to be understood WITHOUT putting into operation, as is where is, stored in PARTLY DISMANTLEDcondition
pressure appr. 0500 t
distance between columns appr. 2240 mm
stroke appr. 1180 mm
distance table/ram, max. stroke up, adjustment up appr. 1800 mm
table surface area appr. 2050 x 1800 mm
pressure of drawing cushion in table appr. 250 t
stroke of drawing cushion in table appr. 380 mm
drawing cushion surface in table appr. 1800 x 1200 mm
pressure of drawing cushion in ram appr. 122 t
stroke of drawing cushion in ram appr. 195 mm
drawing cushion area in ram appr. 1800 x 1200 mm
ram surface appr. 2215 x 1800 mm
table height over floor appr. 500 mm
speed down appr. 400 mm/s
speed up appr. 10 - 400 mm/s
working speed appr. 10 - 100 mm/s
oil volume appr. l
height over floor appr. 6,8 m
depth of the foundation appr. 3,0 m
power requirement appr. 120 + 75 + 64,5 kW
weight appr. 110,0 t
dimensions appr. 3,6 x 2,2 x 8,5 m
Ref.11366
LAEPPLE SE 500 (UVV) DOUBLE COLUMN DRAWING PRESS -HYDR
LAEPPLE / ZEH 500 (UVV) / 1985 Double Column Drawing Press -Hydr.
make: LAEPPLE
type: SE 500 (UVV)
year of make: 1976 / 91
description:
with oilhydr. drive, hydr. and electr. control according to the German Safety Regualtions for manual put-in ("UVV"),
hydr. drawing cushion in ram, cutting impact cushioning, ram interlocking, two-hand operation, electrical cabinet
our list price is to be understood WITHOUT putting into operation, as is where is, stored in PARTLY DISMANTLED
condition
machine-datasheet
pressure appr. 0500 t
distance between columns appr. 3200 mm
stroke appr. 1250 mm
distance table/ram, max. stroke up, adjustment up appr. 1810 mm
table surface area appr. 3000 x 1900 mm
pressure of drawing cushion in ram appr. 150 t
stroke of drawing cushion in ram appr. 200 mm
drawing cushion area in ram appr. 2400 x 1200 mm
ram surface appr. 3160 x 1900 mm
speed down appr. 400 mm/s
speed up appr. 250 mm/s
working speed appr. 18 - 58 mm/s
oil volume appr. l
height over floor appr. 6,5 m
power requirement appr. 90,0 + 36,5 kW
weight appr. 110,0 t
dimensions appr. m
Ref.11367
