MACHINE TOOLS & SHEET METAL MACHINERY
Lathes
Vertical turning lathe WMW DKZ 2000x1250B, 1970.,table dia. 1800mm., Maximum diameter of work piece – 2000 mm.,,max height 1250mm.,weight of machine 35 ton.
Vertical turning lathe TOS HULIN SKJ12A, 1991. plate diameter 1250,swing 1400 mm.,max height 1150mm.,weight of machine 13 ton.
Oil Country Lathe Ryazan 1N983,1970,max.working dia. 830mm.,max.length 800mm.,spindle hole dia. 310mm,weight 9,1 ton
Screw-cutter lathe 1M65(Ryazan), 1975. Work piece maximum diameter 1000 mm; Work piece maximum length 5000 mm. ,weight 15,5 ton.
Screw-cutter lathe 165(Ryazan), 1975. Work piece maximum diameter 1000 mm; Work piece maximum length 3000 mm. Weight 12,5 ton
Screw-cutter lathe 1A64(Ryazan), 1976. Work piece maximum diameter 800 mm; Work piece maximum length 2800 mm.weight 11,7ton
Screw-cutter lathe Ryazan 1M63(Russia), 1981. Work piece maximum diameter above bed 630 mm; Work piece maximum length 2800 mm.
Screw-cutter lathe Ryazan 1M63(Russia), 1975. Work piece maximum diameter above bed 630 mm; Work piece maximum length 1500 mm.
Screw-cutter lathe Stanko 16K20,1980,Work piece maximum diameter 400 mm; Work piece maximum length 1000 mm
Screw-cutter lathe Stanko 1K62,1975,Work piece maximum diameter 400 mm; Work piece maximum length 1000 mm.
Facing lathe 1693(Kramatorsk), 1966,faceplate dia.2500mm.,work piece maximum diameter 3200 mm; Work piece maximum length 1250 mm
Universal AJTB Lathe (loco C&W) Make Rafamat Poland type XAD 112, 1975
VERTICAL RAILWAY LATHE RAFAMET UBC 150 ,1987,Machine manual ,Max. processing diameter 700-1500 mm ,Distance between wheels 1435mm ,(can be regulated to 1524mm and 1676mm) ,Weight 59 200 kg,
Double-support lathe for wheel set turning Rafamet UBB 112 1975, Max processing diam. 700-1500mm, Distance between wheels 1435mm (can be regulated to 1524mm and 1676mm)
Horizontal six-spindle automatic bar lathe TORNOS AS 14, 1981,.pickup,threading,Capasity round 14mm.,hexagonal 12mm.,square 10mm.,max. feed length 75mm.,max.turning length 60mm.,spindle speed 600-6000 RPM,weight 2200 kg,.
Horizontal six-spindle automatic bar lathe GILDEMEISTER –POTISJE AS 32, 1984. Work piece diameter 32 mm.
Sliding Head Auto Lathe TORNOS R16.,
Deep Hole Drilling Machine Ryazan 163, 1975, Drilling depth:342—2200mm,. Max. ring drilling diameter:φ 250mm., Centers height over the slides 315mm.,Dimensions 4950 x 1780 x 1490 ,Weight 5,5 ton,
Boring machines
Boring Mills,Horizontal,Table Type IR1600MF4(Russia)CNC BOSH Micro 8,1984,spindle 160mm.,table 1800x1600mm.,X-2000mm.,Y-1600mm.,Z-1000mm.,max.working weight 8000 kg,,weight of machine 39ton.
Horizontal Boring Machine Stanko 2N637GF1,1988,spindle 160mm.,
,table 1250x1250mm ,X 2000mm.,Y 1600mm.,Z 1600mm.,longitudinal travel 1600mm.,weight 33,5 ton
Horizontal Boring Machine Stanko 2A636F1,1988,spindle 125mm.,table 1600x1800mm,with ball screw ,weight 36,8 ton.
Horizontal Boring Machine Stanko 2A635,1965,spindle dia. 125mm.,table 1250x1600mm., weight of machine 28,8 ton..
Horizontal Boring Machine Stanko 2B660F1,1975,spindle 220mm.,working area 5000x8100mm.,X-6000mm.,Y-3000mm..,weight 142 ton.,with rotary table 2000x2000mm.
Horizontal Boring Machine Stanko 2B660F1,1975,spindle 220mm.,(without rotary table),working area 5000x8100mm.,X-6000mm.,Y-3000mm..,weight 142 ton.
Horizontal boring mill WMW Union BFT 90/3-1, 1983.,table 1000x1200mm.,spindle 90mm.
Horizontal borer Stanko 2622V, 1980.,1120x1250mm.,spindle 110mm.
Horizontal borer Stanko 2A620-2, 1985.,1250x1120mm.,spindle 90mm.
Horizontal borer Stanko 2620V, 1975.,1250x1120mm.,spindle 90mm.
Radial Drilling Machine Csepel RF 22/B, 1965, Diam. 50mm,length 1600 mm
Radial Drilling Machine Stanko 2A554, 1989, Diam. 50mm,length 1600 mm
Radial Drilling Machine Stanko 2M55, 1973, Diam. 50mm,length 1600 mm
Radial Drilling Machine Stanko 2K52 1973 Diam. 25mm,length 800 mm
Boring Stanko 2N150, 1980,.diam 50mm.
Special Precision Boring Machine POSALUX MULTIFOR 14 CNC(Switzerland)
(4-spindle and 6-spindle), 1985
Grinding machines
Crankshaft Grinding Machine Stanko HSh 3-35,1981,max. workpiece length 6000 mm.,swing 710mm., max.workpiece weight 5000 kg,,P motor 25 kW,weight of machine 32 ton.
End Face(angle) Grinding Machine HSh4-31, 1981,max.dia 1000mm., max. length 3100 mm,machine weight 23ton.
Cylindrical Grinding Machine Stanko 3M175,1984,max. workpiece length 2800 mm.,swing 400mm., weight of machine 13,8 ton.
Crankshaft grinding machine Stanko 3A423,1985,max. workpiece length 1600 mm., max.dia. 580mm.,weight 7,2ton.
Grinding machine Jones Shipman, model 1052, 250x1052mm., 1982.
Cylindrical grinding machine Stanko 3U10V, 1986.
Surface grinding machine Magerle(Switzerland)F10-V-R-S4.24, 1986.
Surface grinding machine Magerle(Switzerland)FRT-6-R, round table,1986.
Sharpening Machine Walter HELI-CENTER GC-6 CNC(6axis),1986,
x-620mm.,z-270mm.,y-300mm.
Surface grinding machine MATRIX, 1965,. 430 x 1200 mm.
Surface grinding machine 3L722F1(Russia), 1985,. 400 x 1250 mm.
Surface grinding machine 3G71M (Russia), 1975. 630 x 200 mm.
Worm grinding machine Stanko 3451,1978, Work piece maximum diameter 320 mm.,max. length 850mm.
Spline grinding machine Stanko 360M,1977
Tool – grinding machine 3B662VF2(Russia), 1987
Circular saw blade grinder Vollmer CHT, 1983
Line(grinding)WMW SIW 5/1E,WMW SIW 3/1E CAC,WMW AGL 50/4PC,WMW WEMA Berlin SI 4A for production of Bearings
(6 machines) ,1988
Milling machines
Plano Milling-Boring Machine Stanko 66K25F4(6625) CNC,YOM 2004,table 2500x8000mm,weight of machine 126 ton,
Plano Milling Machine UZTS Stanko UF 6625U(Special model-Two vertical+Two horizontal spindles),1983,table 2500x8000mm,distance between column 3060mm.,max.workpiece height 2500mm.,weight of machine 146 ton
Plano Milling Machine STANKO 6662,1970,table 1800x6000 mm.,max. workpiece weight 40 ton.,P motor 28 Kw.,weight of machine 76,7 ton.,
Plano miller Stanko 7212G,(with grinding head) 1985. table 4000x1150mm.,weight 40,2 ton.
Plano miller Stanko 6M610F11-203, 1991. table 1000х3150mm.,weight 38,5 ton.
Plano miller Stanko 6608 1985. table 800х3000mm.,weight 31 ton.
Vertical milling machine 65A60F1 11, 1986(Russia). 630 x 2000 mm.,weight 16 ton
Universal Milling Machine MIKRON WF2SA(Switzerland),1984,table 250x700mm,with Haidenhain 114
Vertical-milling knee-type machine FSS 400V/2,1985,table 400x1600mm.
Vertical-milling knee-type machine FQ 400,1985,table 400x1600mm.
Universal -milling knee-type machine with swivel head Heckert FW 400-V, 1982., 1600 x 400 mm.
Gear processing machinery
Gear-hobbing machine KOLOMNA 5342, 1960. Table diameter 1800 mm,max.working dia. 2000 mm., module 20.
Gear-hobbing machine Stanko 53A80N, 1980. Table diameter 800 mm, module 10.
Gear-hobbing machine Stanko EZS 098(analogue 53A80N), 1989. Table diameter 800 mm, module 10.
Gear-hobbing machine Stanko 53A50N, 1983. Table diameter 500 mm, module 8,weight 9850 kg.
Gear-hobbing machine Stanko 5K32A(Russia), 1975. Table diameter 800 mm, module 10.
Gear-hobbing machine Stanko 5E32(Russia), 1962. Table diameter 500 mm, module 6
Gear-hobbing machine 5K301P,1975,max.dia 125mm.,modul 2,5.
Semi-automatic spur gear-grinding machine 5M841(Russia), 1991. Work piece maximum
Thread grinding machine REISHAUER US ,grinding length: 450 mm,distance between centers: 870 mm,clamping length 1080mm, weight: 4850 kg,
Universal thread grinder Stanko 5K822V(Russia), 1991. Work piece diameter 200mm. Work piece maximum length 500 mm.
Semi-automatic spur gear-grinding machine 5A841(Russia), 1980. Work piece maximum diameter 320 mm; Module of a gears 8.
Semi-automatic spur gear-grinding machine 5A868 ,1984. Work piece diameter 800 mm, max module 12,
Gear –shaping Stanko 5140, 1979. max diameter 500 mm, max modul 8,
Gear –shaping Stanko 5M14, 1967. max diameter 500 mm, max modul 6,
Gear –shaping Stanko 5V12, 1974. max diameter 200 mm, max modul 4,
Semi-automatic gear planer Stanko 5A250P (Russia), 1979. max. dia 500mm.,max.module 10,
Semi-automatic gear milling Stanko 5S23P(Russia), 1991(new) max diameter 125mm, max. module – 2,5
Semiautomatic spline-milling machine Stanko 5350A. 1987 max diameter 500mm, Max length 1000mm.,
Machining centres
Machining centre vertical Bridgeport VMC 560 CNC Siemens,1999,x-580mms,y-410mms,z-480mms,
IR500PMF4 CNC Bosch 1988.
Planing machines
Planning machine Stanko 7A112,1986,table 1120x4000mm.,weight 32,8ton,
Planning machine Stanko 7212G,1975,(with milling head)table 1150x4000mm.,weight 32,2 ton,
Planning machine Stanko 7A210,1990,table 900x3000mm.,weight 25,5ton
Vertical Slotter Stanko 7M430. 1975.table dia.600mm.,stroke 350mm.,
Vertical Slotter Stanko 7A420. 1975
Broaching Machine Stanko 7A520,1980, 63 tonnes, stroke 2000 mm
Presses
Knuckle joint coining press K0032(Barnaul),1971, capacity 160ton.,stroke160mm,
Single crank Trimming Press Voronez K2538,1970,capacity 630 ton,stroke 320 mm.,Shut height 800 mm.,weight 51,2 ton.,
Trimming press KV2536, 1988. Capacity (tons) – 400, stroke - 250 mm, table 1000 X 1000 mm. .weight 31,4 ton,
Trimming press KV2534, 1979. Capacity (tons) – 250, stroke - 200 mm, table 800 X 800 mm. .weight 23,2 ton
Mechanical Press Barnaul KA264,1966,capacity 250 ton., stroke 200mm.,shut height 560mm
Mechanical Press RAVNE KES 250A,1982,capacity 250 ton.,table 1400x950mm., stroke 610mm.,speed 55-60 1/min
Sheet-stamping high speed press (automatic) Schuler A2-200/360,1984,capacity (tons) - 200, 100 - 350 s.p.m., table 1350 X 1100 mm., stroke 30 mm
Automatic upstroke sheet stamping press А6126V(Barnaul), 1983. Capacity (tons) – 40, ,shut height 400mm.,weight 15,8 ton,
Sheet-stamping press(automatic) AG6230, 1990. Capacity (tons) 100.
Heavy stamping Transfer Press WMW ERFURT PAUST 100/3,1986, capacity 100ton,stroke 260mm, 10-station,transfer displacement 220mm.,stroke per minute 18-90,weight 32 ton,dimensions 6500x3200x4200,
Sheet-stamping Transfer Press WMW ERFURT PAUST 63/1,1985, capacity 63ton, 12-station,weight 19 ton,dimensions 4550x1800x4300mm,
Sheet-stamping Transfer Press WMW ERFURT PAUST 40/1,1976, capacity 40ton, 12-station,weight 13 ton,dimensions 3400x1400x3400 ,stroke 224mm., transfer displacement 140mm
Double-crank single-action close-frame press Voronez KV3539,1986,capacity 800 ton.,stroke 320mm.,shut height 950mm.,table 1600x2500mm.,weight 97,6 ton,
Double-crank single-action close-frame press Voronez K3537,1968,capacity 500 ton.,stroke 250mm.,table 1400x2500mm.
Double-crank press Voronez K3735A, 1974. Capacity 315 tons, stroke – 500 mm, table – 2500 x 1250 mm, 18 s.p.m.,weight 44,2 ton
Single-crank press KV2132, 1991. Capacity (tons) – 160,table 670x1000mm.,stroke 160mm,shut height 480mm.,weight 14,2 ton.
Single-crank press KD2126, 1989. Capacity (tons) – 40
Double-action mechanical press Erfurt PKnT-315, 1986. Capacity (tons) – 315, 1400 X 1400 mm.
Single crank-Double-action mechanical press Voronez KA 5530, 1986. Capacity (tons) – 100+63,
Screw press Stanko F1734A,1983,capacity 250 ton.,weight 17,6 ton
Screw press Stanko F1732,1980,capacity 160 ton.,weight 9,5 ton
Wheel Mounting Press-Fitting Hydraulic presses P 6736,1985, capacity 400 ton.
Hydraulic cold stamping press P0443(Odessa), 1970. Capacity -2000 tons. Table – 1000 x 1000 mm. Stroke 500 mm
Multislide stamping press(automatic)Bihler,1984, capasity 5 ton,
Forging-stamping hammer Voronez K05.501,1983,capacity 1,6 ton.,weight 41 ton.,
Air forging hammer Voronez M 4136,1971, Max mass of drom parts – 400kg.,weight 13 ton
Air forging hammer BECHE L8-275,1955, Max mass of drom parts – 275kg.,weight 12,8 ton
Air forging hammer Stanko MA 4132. Max mass of drop parts 160kg.
Air forging hammer Voronez MB 412. Max mass of drop parts 150kg.
Air forging hammer Stanko MA 4129A. Max mass of drop parts 80kg.
Air forging hammer Stanko MA 4127. Max mass of drop parts 50kg.
4 Rolls Plate Bending Machine Ryazan I 2426,1974,max. ticknes 40mm,max.width 3150mm.,max. pre-bending ticknes 30 mm.,roll dia. 600mm.,weight 58 ton
Three Rolls Plate Bending Machine STROJARNE PIESOK XZMP 3150/10,1989,max. ticknes 14mm,max.width 3150mm.,max. pre-bending ticknes 10 mm.,roll dia. 360mm.,weight 22 ton,
Three Rolls Plate Bending Machine Stanko,1975,16x2500mm.,
Shear Ermak CNC HVR 3100x16,2006,
Turret Punch Press TRUMPF TRUMATIC 240 CNC,1987,table1000x2000mm.,
Billet shears Erfurt ScK 315,1985,capacity 315 ton
Joist Shear NB 1431,capacity 100ton,weight 5,4 ton
Ironworkers NB 5222,1985,weight 2,7 ton,
Ironworkers NB 5221,1985,weight 1,5 ton,
Alligator Shears(Russia) ,capacity 315 ton.,
Others
IMG CNC plasma cutting line for profiles,YOM 2004
Manufacturer: IMG Ingenieurtechnik und Maschinenbau GmbH
TECHNICAL DETAILS
Flat profiles, mm 60 x 70…500 x 36
Bulb profiles, mm HP 60 x 5…HP 430 x 17
Angular profiles (equilateral), mm 50 x 50 x 5…200 x 200 x 25
Angular profiles (inequilateral), mm 75 x 50 x 6…350 x 150 x 15
Max. work piece length, mm 170000
Min. work piece length, mm 12000
Price 185000 EUR
ESAB plasma cutting machine TELEREX TXB 7000,2007,table 4000x34000mm, price 45000 EUR
ESAB plasma cutting machine TELEREX TXB 6500 LH,2004,table 4000x34000mm,
Honing machine Nagel HHM 90, 1980. Range Ø 1,9 - 100mm.
Buffing machine LAPMASTER, 1984. 0,03/ 235 mm.
Bolt making machine Stanko AB 1218,1980,max.dia.6 mm,max.length 60mm,weight 4,2 ton,
Spring coiling machine TOS TAU 10A, 1978. Wire diameter 0,4 – 1,0 mm; Spring outer dia.5- 22 mm.
Spring coiling machine A5214A(Russia), 1988. Wire diameter 0,8 – 2,5 mm; Spring outer dia.5- 22 mm.
Thread-rolling machine BAD DUBEN WMW UPW-12,5.1 ,1980, min/max diam workpiece rolling 3/70 mm.
Die Casting Machine BUHLER A-40-D,1971,capacity 40 ton,table 450x410mm.,weight 2,9 ton.
Ref. 12124
GEAR HOBBING MACHINE FD3600
Main technical data is:
Max machining diameter: 3500 mm
Min machining diameter: 550 mm
Max load on the table: 25000 kg
Max module 30/40 mm
Machined teeth number: 30 – 540
Hob max size: Ǿ 350x400 mm
Installed power: 48 kW
Total weight 40000 kg
Accessories:
- gear shaping device;
- tool clamping(fixing) device;
- change gears
Ref. 12127
ROLL GRINDER MOD.3417V
ROLL GRINDER MOD.3417V
1500 x 6000 mm
Make: Kharkov the Ukraine
YOM 1974
Technical specification:
Max length of work piece – 6000 mm
Centers height above bed plate – 820 mm
Max weight of work piece – 40 t
Max D of work piece – 1500 mm
Max camber/concavity of worked surface – 1 mm
Max length of taper – 500 mm
Hole taper of front spindle hole – metric
Hole taper of rear spindle hole – metric
Front faceplate D – 985 mm
Max travel of grinding head – 550 mm
Feed per one flywheel turnover – 0,5 mm
Feed per one gear (impact) – 0,005 mm
OD of grinding wheel – 450 – 900 mm
Machine dimensions:
- length – 14 700 mm
- width – 5 000 mm
- height – 2 500 mm
Machine weight – 99 100 kg.
Ref. 121213
SKODA - DAINICHI - BETTS - STANKO – NILES - LEBLOND ENGINE LATHE / SHIBUARA, GIDDINGS & LEWIS BORING MILL HORIZONTAL FLOOR
LIST OF MACHINE TOOL EQUIPMENTS
150" X 600" SKODA HEAVY DUTY ENGINE LATHE
SKODA (1993)
Lathe - Engine
Year: 1993
Bed 5 WAY
Working Diameter 120"
Working Length 600"
92" X 20' BETTS BRIDGEFORD ENGINE LATHE
BETTS
Lathe - Engine
Swing Over Ways 92"
Swing Over Carriage 66"
Distance Between Centers 20'
Spindle Speeds 1 TO 80 ROPM
Threads 1/2 TO 56 TPI
Feeds .006 TO .700 IPR
Diameter Of Spindle Hole 2-7/8"
Diameter Of Face Plate Chuck 72"
Number Of Sliding Jaws On Chuck 4
Length Of Jaws 14"
Adjustment Of Jaws On Chuck 32"
Diameter Of Spindle Quill 14"
Hard Ways YES
Main Motor 125 HORSEPOWER
84" X 40' DUAL CARRIAGE STANKO ENGINE LATHE
STANKO (1980)
Lathe - Engine
Serial 179
Model 1A670
Year 1980
Swing Over Ways 84"
Swing Over Carriage 64"
Distance Between Centers 40'
Diameter Of Face Plate Type Chuck 78" WITH 4 20" SLIDING JAWS
Spindle Speeds 1 TO 114 RPM (VARIABLE)
Spindle Hole 3"
Power Compound YES
Threads English 3/8 TO 12 TPI
Thread Metric 2 TO 96 MM
Number Of Carriages 2
Diameter Of Tailstock 17"
Tailstock Spindle Travel 16" POWER
2 Roller Type Steady Rests 28" AND 39" (HEAVY DUTY)
1 Belly Type Steady Rest 63" WIDE 2 POSITIONS
Weight Capacity Between Centers 130,000 LBS
Power Tailstock Travel And Lock YES
Tailstock With 50 Ton Load Meter YES
Full Length Metric Threading YES
4 Bed Way Machine YES (88" ACROSS WAYS)
Rapid Traverse YES
Digital Readout To 1st Carriage YES (3 AXIS)
Complete Updated Electrical YES (ALLEN BRADLEY)
Operator Station On First Carriage YES
Off Set Tailstock YES
Main Motor 100 HORSEPOWER
MACHINE DIMENSIONS: 70”LONG X 21”; WIDE X 95" HT.
WEIGHT: 260,000 LBS
84" X 28' DAINICHI ENGINE LATHE
DAINICHI
Lathe - Engine
Serial 16386
Model TYPE H 200 X 900
Year New 1979
Swing Over Ways 84"
Swing Over Carriage 68"
Distance Between Centers 28'
Spindle Speeds 9.5 TO 200 RPM
Spindle Hole 4"
Steady Rest 33.5 ROLLER TYPE
Bottom Steady Rest 44" ROLLER TYPE
Capacity Between Centers 32,000#
60" 4 Jaw Chuck YES
Power Tailstock Quill YES
Power Tailstock Travel YES
66" X 312" NILES ENGINE LATHE
NILES
Lathe - Engine
Serial AP42H M-333
Model 48
Swing Over Ways 66"
Swing Over Cross Slide 44"
Distance Between Centers 26'
Spindle Speeds (variable) 1 TO 290 RPM
Chuck 4 JAW FACE PLATE TYPE
Rapid Traverse YES
Feeds .008 TO .423 IPR
Steady Rest 19" & 30"
Motor 100 HORSEPOWER
64"/50" x 41' STANKO DOUBLE CARRIAGE ENGINE LATHE
STANKO
Lathe - Engine
Serial 175
Model A-665
Year 1976
Swing Over Ways 64"
Swing Over Carriage 49.21"
Max Rated Turning Diameter 62.99"
Rapid Traverse Of Carriage 94.48 IPM
Distance Between Centers 492.12" (41')
Spindle Speeds 1.26-160 RPM
Inch Threading 20 TO .375 TPI
Metric Threading 1 TO 96 TPI
Number Of Carriages 2 WITH POWER COMPOUND
Tailstock Quill Feed 143.96"
Rapid Traverse Of Tailstock 167.7 IPM
Max Cross Displacement Of Tailstock 0.669"
3 Bed Way Machine YES
Equipped:
Digital Readout System
Login-jaw Face Plate Type Chuck
Inch/metric Threading Type Chuck
Taper Turning Power Compound
Geared Type Taper Cutting Full Length
32 " Diameter Roller Type Steady Rest
50" Diameter Roller Type Steady Rest
Power Rapid Traverse To Carriages
Power Rapid Traverse Tailstock
Tailstock Pneumatic Clamp In
Cross Displacement Of Tailstock
3-way Bed Construction
Carriages To Pass Steady Rests & Tailstock
150 Hp Main Drive
FLOOR SPACE: 110" X 746"
MAX WORK WEIGHT CAPACITY: 88,000 LBS
OVERALL HEIGHT: 91"
MACHINE WEIGHT: 154,000 LBS.
56" X 18' NILES ENGINE LATHE
NILES
Lathe - Engine
Swing Over Ways 56"
Distance Between Centers 18'
Swing Over Cross Slide 44"
Spindle Speeds VARIABLE
Chuck 52" 4 JAW FACE PLATE TYPE
Threads 1 TO 14 TPI
Width Of Ways 8-1/2"
Rapid Traverse YES
Steady Rest (3) 17",29" & 40" 5 POINT
Pendant Control YES
OVERALL DIMENSIONS: 28'8" X 80" X 102" HIGH
WEIGHT - 37,000 LBS.
52" NILES RAILROAD CAR WHEEL LATHE
NILES
Lathe - Engine
Diameter Of Wheels 52"
Dual Sliding Headstocks YES
2 Carriages With Tracers YES
45" X 26' LEBLOND ENGINE LATHE
LEBLOND
Lathe - Engine
Serial NK807
Swing Over Ways 42"
Swing Over Cross Slide 28"
Distance Between Centers 26'
Spindle Speeds 4 TO 255 RPM
Spindle Hole 2-5/16"
Rapid Traverse YES
Hard Ways YES
6" SHIBUARA HORIZONTAL FLOOR TYPE BORING MILL
SHIBAURA
Boring Mill - Floor
Serial 510407
Model BF-16A
Year New 1983
Diameter Of Spindle 6"
Horizontal Travel Of Column 24'
Vertical Travel Of Head 120"
Spindle Travel 36"
Spindle Speeds 3 TO 1200 RPM
Taper In Spindle 50 NS
Power Draw Bar YES
Pendant Control YES
Digital Readouts YES
Horizontal Way Covers YES
Hard Ways YES
Amp Meter YES
Includes:
78" X 98" Shibaura Power Rotary Table #59051
10' X 10' X 14" T Slot Floor Plate #59052
Set Of 24" X 60" X 30" T Slot Angle Plates #59053
Set Of 24" X 51" X 30" T Slot Angle Plates #59054
8" GIDDINGS & LEWIS HORIZONTAL FLOOR TYPE BORING MILL W/ALL
GIDDINGS & LEWIS
Boring Mill - Horizontal
8" Giddings & Lewis Boring Mill: Stock #57306
Serial 270-21-71
Model 70-N8-UF
Includes Also:
102" X 96" Giddings & Lewis Table: Stock #57307
96" X 96" Giddings & Lewis Rotary Air Lift Table: Stock #57309
Giddings & Lewis Milling Head: Stock #57310
Giddings & Lewis Milling Head: Stock #57311
5" SHIBURA HORIZONTAL BORING MILL
SHIBAURA (1974)
Boring Mill
Serial 2671
Model BFT 13C
Diameter Of Spindle 5"
Spindle Speeds 9 TO 1200 RPM
Feeds .00015 TO 1.76
Area Of Table 48" X 96"
Cross Travel Of Table 96"
Saddle Travel 72"
Vertical Travel 96"
Spindle Travel 36"
Taper In Spindle #50 NS
Power Draw Bar YES
Pendant Control YES
Digital Read Outs YES
4 Way Bed YES
OVERALL DIMENSIONS: 11'6" HIGH OFF BASE, 13' 6" ON BASE, BASE IS 10'6" WIDE WITH TABLE REMOVED.
36" X 48" X 96" THOMPSON HYDRAULIC SURFACE GRINDER
THOMPSON (1990)
Grinder - Surface Horizontal
Serial Number 8CX545240
Rebuilt By Thompson 1990
Grinding Capacity 48" X 96"
Under Wheel 48"
(2) Magnetic Chucks 36" X 48"
Wheel Diameter 20" X 6" X 12"
Incremental Downfeed YES
Barnes Coolant Filter YES
Wheel Dresser YES
Horsepower 30
Rpm 1200
ESTIMATED WEIGHT: 75,000 LBS.
12' X 26" CARLTON RADIAL DRILL
CARLTON
Drill - Radial
Serial 5A-5502
Spindle Speeds (36) 10 TO 1000 RPM
Feeds (18) .004 TO .125 IPR
Spindle Travel 24"
Diameter Of Spindle 4"
Taper In Spindle #6 MORSE TAPER
Distance Spindle To Bed 49" MIN, 97" MAX
Vertical Travel Of Arm On Column 56"
Power Clamping YES
Power Arm Elevation YES
Power Head Traverse On Arm YES
Motor 50 HORSEPOWER
Ref. 1139
