KOLOMNA VERTICAL LATHE 1532T, YEAR 1980
VERTICAL LATHE 1532T
Year 1980
Make Kolomna
Condition Dismantled, loaded into containers; ready for immediate delivery
Inspection Visual inspection at the terminal
Specifications:
Turning diameter : 3200 mm
Turning height : 2000 mm
Faceplate diameter : 3200 mm
Vertical tool slide stroke from the faceplate centre 1900 mm
Workpiece weight : 40 tons
Cutting force
- By right tool slide 6300
- By left tool slide 5000
Max. total cutting force : 10000
Faceplate speed range : 0,66-62,25 rpm
Vertical and horizontal feed range : 0,059-470 mm/min
Rapid traverse of rams and tool slides : 2540 mm/min
Crossrail travel : 430 mm/min
Main drive 63 kW
330-2200 rpm
Machine dimensions: height × width × length : 7150×9345×5120 mm
Machine weight : 90,4 tons
Ref. 11128
POREBA TPK 90-8000 LATHE
1] used POREBA TPK 90-8000 Lathe. NEW 1988 in Very Good Working Condition.
Swing over bed....920mm: Swing over saddle....650mm: Turning
length....8000mm:
Accessories inc: Chucks - Steadies - Taper Turning - Gap Bed
Ref. 111216
SKODA SIU 126/8M HEAVY DUTY LATHE
Heavy Duty Lathe Skoda SIU 126/8M
1.260 mm swing over bed
1.000 mm swing over carriage
8.000 mm turning length
30 Ton workpiece weight without steady rest
Offer :
Heavy Duty Lathe Skoda SIU 126
Manufacturer : SKODA
TYPE : SIU 126
Y.O.C. 1967
Machine Condition : Very Good
Technical Data
Good Condition
Swing diameter over the bed 1260 mm
Swing diameter over the cross slide 1000 mm
Turning length max. 8000 mm
Centre height 630 mm
Work piece weight max. 30000 kg
Feeds : X 0 – 1440 mm/ min
ZO – 3600 mm / min
Spindle drive motor 56 KW
Spindle speed 0.56 – 280 rpm
Chuck diameter : 1260 mm
EQUIPPED WITH
TAPPER TURNING ATTACHMENT
THREAD CUTTING
COOLANT UNIT
DIGITAL READ – OUT
3 PCS x STEADY RESTS
Ref. 111222
STANKO, ACIERA, DECKEL, TITAN - MILLING MACHINES
MILLING MACHINES
1. CNC Universal Tool room Milling machine, SHW, type UF31 NC, TNC 135 HEIDENHAIN
Tilting Table 900 x 700 mm, X/Y/Z – 1000/700/ 625 mm
2. Milling machine ACIERA F5 CNC
Control ELESTA CNC 3000, x/y/z/ 490/310/370 mm, Table 900×350 mm
3. Universal Milling machine DECKEL FP4MA
Control: Grundig CNC Contour 2E, X/Y/Z- 485x385x380 mm
4. Planer type Milling machine STANKO, type 6M616F11
Control NC, Capacity 1600 x 5000 mm
5. Planer type Milling machine STANKO, type 6M610F11-20
Control NC, Capacity 1000 x 3200 mm
6. Plano Milling machine, TITAN, type FLP 1600
Table 5930 mm x 1600 mm, Max. work surface of table 4250 mm x 1600 mm
7. Universal milling machine DECKEL FP4A
Control- Deckel CNC 2301, Tilting Table 430x700 mm, XYZ- 470x370x370 mm
8. Copy Milling machine STARRAG F-200
Twin spindles GF-200, UT-3, Table 2440 x 600 mm, Copy stroke 900 x 500 x 400 mm
9. Facing and Centering machine FXLZD 160/A, WMW Fritz Heckert
Max. drilling diameter : 20 mm, Max. length of workpiece : 800 mm, Max. diameter of workpiece : 160 mm,
Ref. 111232
