NILES ZSTZ 1000 GEAR GRINDING
Used Gear Grinding NILES ZSTZ 1000
Condition: still under power equipped with PLC automat, in very good condition.
Max. wheel diameter…………………………….1250 mm
Min./max. module………………….……………2 - 25
Table diameter……………………………...........1000 mm
Max helical angle………………………………….…45 °
Number of teeth……………………………………10 – 400
strokes…………………………………......….70 - 190 RAM
Diameter of grinding wheel……….............….....300/400 mm
Ref. 91256
UNION BFT 130/6 HORIZONTAL BORING MACHINE
UNION BFT 130/6 HORIZONTAL BORING MACHINE /TABLE TYPE BFT 130/6
Producer Union - Germany
Model BFT 130/6/ under power , digital quote reading system , ball screws
Construction year 1984
Specfication
Spindle diameter 130 mm
Sbindle taper ISO 50
X ( cross) 2200 mm
Y ( vertical) 2000 mm
Z 2240 mm
W 1000 mm
Table 1800 x 2000 mm
Table load 8000 kg
Machine weight 37.200 kg
Including facing chuck and tailstock.
Ref. 101281
PFAUTER P900, PFAUTER P1251, VERTICAL GEAR HOBBING MACHINE
Vertical gear hobbing machine Pfauter P1251 (2 pcs.)
and Vertical gear hobbing machine Pfauter P900 (1 pcs.)
Vertical gear hobbing machine Pfauter P1251 (2 pcs.)
Year: 1979
Tailstock, internal cutting device, change gears are available.
Tech data:
Maximum Workpiece Diameter w/center support....49.25”, 1251mm
Maximum Workpiece Diameter wo/center support...60.00”, 1524mm
Maximum Axial Travel...........................39.37”, 1000mm
Maximum DP / Module in Steel...................1.6 DP, 15.87 MOD
Minimum # of teeth (single-start index drive)..20 teeth
Center Distance Between Workpiece & Hob........2.36”, 60 mm min.
Center Distance Between Workpiece & Hob........31.5”, 800mm max.
Maximum Hob Diameter...........................10”, 254 mm
Maximum Hob Length.............................11”, 280mm
Maximum Hob Travel.............................9.85”, 250mm
Diameter of hob arbors.........................1”,1.25”,1.5”,2”
Taper for hob arbors...........................Morse # 5
Diameter of Work Table.........................47.24”, 1200mm
Table Weight Capacity..........................11000Lbs, 5,000 kg
Diameter of Work Table Bore....................12”, 305mm
Work Arbor Diameter............................2.5”, 63.5mm
Speeds & Feeds (infinitely variable):
- Hob Speeds...................................30 – 180 RPM
- Axial Feed...................................0.020 - 0.240 IPR, 0.5 – 6.000 mm/pr
- Radial Feed..................................0.007 - 0.084 IPR, 0.170 – 2.000 mm/pr
Tangential Feed................................0.008 - 0.096 IPR, 0.200 – 2.500 mm/pr
Electrical:
Volts..........................................240 VAC
Phase..........................................3 phase
Frequency......................................60 Hz
Load of Machine (approx.)......................32 kVA
Dimensions (including space required to remove):
Length.........................................291.80”, 7412mm
Width..........................................169.80”, 4313mm
Height.........................................137.75”, 3500mm
Weight (approx.)...............................50,700lbs, 23,000kg
Equipped With:
Full Pendant Control
Automatic Hob Shifting
Two Cut Work-cycle
Index & Differential Change Gears
Universal Hob Head
Coolant and Hydraulic Oil Coolers
Chip Conveyor
Tailstock and Hob Arbors
Vertical gear hobbing machine Pfauter P900
Year: 1980
Tech data:
Maximum module: 10 .
Maximum diameter of piece: mm. 900.
Maximum travel of axial slide: mm. 500.
DIMENSIONS
Diameter of piece-holder table: mm. 698.
Bore diameter of table: mm. 160.
Maximum dimension of milling cutter.
Maximum dimension of milling cutter.
- diameter: mm. 192.
- length: mm. 220.
Diameter of spindle mill-holder: mm. 32, 40.
Center distance between milling and piece
- max. centre distance: mm. 550.
- min. centre distance: mm. 50.
Cone morse: 5.
Max. movement of milling cutter: mm. 200.
Ref. 101289
STANKO 2B660F1 HEAVY HORIZONTAL BORING MACHINE
Heavy Horizontal Boring Machine Stanko 2B660F1,1975,spindle 220mm.,working area 5000x8100mm.,X-6000mm.,Y-3000mm..,weight 142 ton.,with rotary table 2000x2000mm.
Heavy Horizontal Boring Machine Stanko 2B660F1,1975,spindle 220mm.,(without rotary table),working area 5000x8100mm.,X-6000mm.,Y-3000mm..,weight 142 ton.
Ref. 11126
