MÜLLER ZE 500 - 28.1.2 (UVV) DOUBLE COLUMN DRAWING PRESS -HYDR
MÜLLER / ZE 500 - 28.1.2 (UVV) / 1971 / 90 Double Column Drawing Press -Hydr.
make: MÜLLER
type: ZE 500 - 28.1.2 (UVV)
year of make: 1971 / 90
description:
with oilhydr. drive, hydr. and electr. drive according to the German Safety Regulations for manual put-in ("UVV"),
pneum. drawing cushion in table and ram, depth stop
machine-datasheet
pressure appr. 0500 t
distance between columns appr. 2990 mm
stroke appr. 1070 mm
distance table/ram, max. stroke up, adjustment up appr. 1670 mm
table surface area appr. 2750 x 1500 mm
pressure of drawing cushion in table appr. 140 t
stroke of drawing cushion in table appr. 300 mm
drawing cushion surface in table appr. 2300 x 1000 mm
pressure of drawing cushion in ram appr. 46 t
stroke of drawing cushion in ram appr. 150 mm
drawing cushion area in ram appr. 1950 x 1030 mm
ram surface appr. 2750 x 1500 mm
table height over floor appr. 600 mm
height over floor appr. 6,89 m
height beneath floor appr. 1,21 m
depth of the foundation appr. 6,0 m
power requirement appr. 160,0 kW
weight appr. 120,0 t
dimensions appr. 4,64 x 3,15 x 8,1 m
Ref.11368
CRANK SHAFT LINE FOR TRACTORS, EXCAVATOR, AND SMALL MARINE MOTORS FROM 4 CYLINDER TILL 12 CYLINDER.
a crank shaft line for tractors, excavator, and small marine motors from 4 Cylinder
till 12 Cylinder.
Max. Crankshaft length: 1700mm
Max. Swing Diameter: 360mm
The line is doing the roughing process after forging.
Following Machines are included this line:
1. WERAG DZ 111-PW16-1600
Double Ending Forming Process
Made in 1991
CNC Control SIEMENS 820
2. GFM FKD - 20
Crankshafts Milling Machine for pivot
Made in 1978
Control INDRAMAT
3. BOEHRINGER KW1345E / CNC
Crankshafts Milling Machine for crankpin and pivot
Made in 1991
CNC Control SIEMENS 820
Ref. 2137
GURUPTZE A1000 HEAVY DUTY LATHE
GURUPTZE A1000 HEAVY DUTY LATHE - 1.38M X 5M CAPACITY WITH C AXIS AND MILLING HEAD (SIEMENS 840C)
Stock Reference No: 12614
Year: 2000
Controller: Siemens 840C,
BETWEEN CENTRES: 5000mm,
SWING OVER BED : 1380mm,
SWING OVER SLIDE: 1060mm,
With 3 steadies (one of which is a traveling steady),
Milling spindle : SA 40,
C-Axis,
Machine is in good working order, visible working in factory.
Ref. 2138
NILES ZSTZ10H GEAR GRINDER
Gear grinder make NILES model ZSTZ10H
The machine was purchased new by the factory in 1988.
Main technical data is:
Max. Working Dia. 1.250 Mm.
Min./Max. Working Module 2/25 Mm.
N. Of Teeth 5 - 400
Table Dia. 1.000 Mm.
Max. Weight On Table 4.000 Kg.
Face Width 430 Mm.
Max. Helix Angle 45°
ÆWheel 300 - 400 Mm.
Total Weight 28 Tons.
Ref.21315
