E A F 100 tons Daido Japan 2011
E A F 100 tons Daido Japan 2011 800,000 tons /year 2012 world's 9 classification society cert ( actual 135 tons) tap to tap time 50-55 min, ASME certifcation
70 min/charge ( consecutive basis)
LF 2 units Daido Type EBT, Toshiba Transforemer 70MVA AC 3 Electrode
100 tons , Toshiba Transfomer 18MVA
Ingot molds: 80 t / 60 t / 50 t / 32 t / 20 t / 15 t / 10 t / 8 t / 5 t, etc
VOD Daido Japan Boiler 25 tons x 2 sets
DCS Main 14,000m3 x 2, Bostor 4,000m3
Transformer Toshiba 18,000KVA , 60Hz
Cranes 3 units 300/250/110 tons
OHC scrap in 130 tons, Ladle 300tons ladle move 250 tons
CCM( optional) SMS Meer 2012 Never used , No of strands: 2 curved type
0.2-2.5 m/min , Tundishi 21 tons9 retangular) Round bar: Pie 800mm, pie 600mm,
W S U 9 molds, including M-Ems , strand heater Section size: 600x450mm, 390x250mm, 192x 250mm
presses(optional) Daeguyo 2012 3 presses( 6500, 4000 and 2000 tons)
Ring mill(optional) Kaltec Korea 2012 Hydraulic , 7000mm/ring , capa : 3500 tons
Ref. CGS101338
BMD FPE 100E Moulding line Year of construction: 1978
Moulding line BMD - 1100 x 700 x 300/300 mm
Brand: BMD, type: FPE 100E
Year of construction: 1978, weight: 235.771
Moulding line to visit in operation, free in 2014
Type Multi-piston
Pression +/- 13 kg/cm2
Dimensions moulding flasks 1100 x 700 x 300/300
Quantity of flask couples 110
80 couples of flasks/h
Output KUHN 50 flasks/h
Requirement of green sand +/- 60 m3/h
Building year 1978
Working tension 400 V 50 Hz without neutral conductor
Tension of electro valves 110 V 50 Hz
Tension of limit switch 24 V DC
Control SIEMENS automatic (new in 1995)
Control display 10’’ (new in 2007)
Hydraulic unit with oil tank 3000 lt
3 hydraulic pumps 45 kW each (renewed in 2011)
Movements of flasks electrified
Hydraulic moulding press and press out station
Pneumatic turn over and remould station
Flask transfer wagon full electric
This line will be free in 2014
3 samples of origin drawings for your disposition
Plant to visit in working
Total weight +/- 240 t
Requirement of place on the floor 37 x 11 m
Important lot of spare parts for your disposition
7 double support frames for the pattern plates (14 pcs)
Ref. CGS101391
Achenbach 4 Hi Non Reversing Cold Rolling Mill Year 1975
Achenbach 4 Hi Non Reversing Cold Rolling Mill Year 1975
Technical data:
Back-up roll diameter (max/min): 864 / 800 mm
Work roll diameter (max/min): 360 / 320 mm
Back-up roll barrel length: 1625 mm
Work roll barrel length: 1676 mm
Dimensions of sleeves: 296 / 250 x 1626 mm
Coil weight: 3000 kg max
Coil O.D.: 1020 mm max
Width of rolled strip (min/max): 850 / 1450 mm
Thickness of rolled strip: 0.065 / 1.6 mm
Max speed of mill: 800 m/min
Roll positioning - mechanical: P = 2 x 13 kW n = 725 RPM
Roll gap regulation: hydraulic DGC (differential gage control)
Bearings on rolls
back-up rolls: 4-row roller bearings
work rolls: 2-row roller bearings
Lubrication of bearings on rolls: oil mist
Roll counterbalance: fluid-operated
Max thickness of strip cut on guillotine shear: 2.0 mm
Main drive : DC motor
P = 1000 kW
N = 236 / 70.7 RPM
M = 41.3 – 13.8 kNm
Pay off:
Conical with mechanical movement parallel to roll axis
Motor power: 180 – 360 kW
Tension: 1250 – 15000 N, 3750 – 45000 N
Winder:
Motor power: 180 – 360 kW
Tension: 1000 – 12000 N, 3000 – 35000 N
Transfer of coils: circular under the mill stand
Transfer of sleeves: by gravity under the mill stand
Roll cooling installation
Capacity of system: 200 dcm3/min
Oil pressure: 10 atm
Tank capacity: 40 m3
Oil filtration: plate type
Drive lubrication
Capacity of system: 160 dcm3/min
Tank capacity: 1600 dcm3
Oil pressure: 6 atm
Low pressure hydraulic installation
Working pressure: 35 atm
Hydraulic installation of circular transportation
Working pressure: 100 atm
High pressure hydraulic installation
Working pressure: Roll bending: 160 atm
Roll counter balance: 150 atm
DGC: 200 atm
Ref. CGS101394
Sermas Aluminium Slab Saw New 2001
Sermas Aluminium Slab Saw New 2001
Machine:Band Saw
Manufacturer:Behringer
Year of Manifact.:2006
Description:
Saw drive:
Drive power: 30 kW
frequency controlled; cutting speed in
infinitely variable
- Cutting speed = 100 - 550 m/min
- Roller guides of saw blades
- saw blade dim.: 67 x 1,6 mm
- Slab length max. ca. 7000 mm
Equipment:
- Saw
- Entry and exit roller tables
- Length measuring device: 50 – 7000 mm
- Swarfs conveyor
- PLC control
- Behringer Computer control
- Micro-spray system
- Central lubrication
- Pusher
etc.
Miscellaneous:
shut down
Technical Data:
Type:HBP1300-2100
Material:Aluminium
Operating range:
Height:1300mm
Width:2100mm
Length:7000mm
Motor power:30kW
Ref. CGS1013103
