Aluminium-and-Other-Non-Fer.jpgCement-Plant.jpgCrawler-Cranes.jpgCrude-Oil-Refineries.jpgForging-Plant-and-Machinery.jpgForging-Plant.jpgHeavy-Machine-Tools.jpgHeavy-Material-Handling.jpgIron-&-Steel-Mills.jpgMachine-Tools.jpgPacking-Plants.jpgPaper-Plant-and-Machinery.jpgPort-Handling.jpgPower-Plant.jpgPrinting-Press-Plant.jpgSheet-Metal-Plant-and-Machi.jpgVertical-Turret-Lathes.jpg

FOR LATEST OFFERS PLEASE VISIT OUR NEW WEBSITE www.bpmbllp.com

LEE WILSON BELL ANNEALING FURNACES

(2) LEE WILSON BELL ANNEALING FURNACES
Gas Fired
108" (2793mm) Dia.
80" (2032mm) High
(2) Furnaces
(4) Bases
(4) Retorts
All Controls, Instrumentation
 

Ref.CGS101321

Bielloni 3 Layer Co-extrusion Line

Bielloni 3 Layer Co-extrusion Line
Details:- Type: Bielloni
- Materials to be processed: LLDPE/LDPE/LLD/other blends.
- Extruders: Extruders: 1x60 + 1x80 + 1x60 mm
- Head: 3-Layer blown film die head
- Die diameter 400 mm + 350 mm IBC
- Die Gap: 1.8 mm
- Output: Up to 350 kg/hour depending on material formulation
- Air ring: single flow air ring
- Take off: Take off 1600 mm wide

Rewind:
- Double winder, fully automatic back to back rewinder
- Reels diameter up to 600 mm
- Winding width 1.600 mm

Accessories:
- Calibrating basket
- Corona-treater
- Air shafts (2)
- Fabrication year: 1993

Ref.CGS101324

Eumuco Rw1 Rolling Mill

EUMUCO Rolling mill
Mod: RW1
Diameter of pistons to roll: mm. 370
Cylinder’s width: mm. 500
Max. length to roll: mm. 570
Cylinder’s rpm: g.p.m. 80
Max. material allowed: mm. 55
For forging press to drop-forge with push’s capacity of 2500-4000 kgm
For press to drop-forge with pressure of 2000 t.
Puissance: 20 CV
Engine’s speed: g.p.m. 1500
Weight of machine: kg. 5300

Ref.CGS101327

IHI Japan E.A F 30 Tons Meltshop

E.A F 30 tons  meltshop
Make IHI Japan
Year 1974
brief description
capacity upto 40 tons
 30 tons/heat(rated) 37 tons( actual)
 300,000 tons /year
revamped in year 2004, 2008 and 2012
CCM Sumitomo   REvamped in 2004 by Kobe steel        S( bow) type
No of stands: 4       
products : billet( 120 x 120 mm)        
dust collector Dongguk    year 2010        closed type
16,600 m3/min       
re bar mills  Kobelco    bar size : 10" and 13"       
 ( 350,000 tons/year)      Billet size : 120 mm x 3.5 meters       To be offered separately ,
Re heating furnace : 70 tons/HR       Delievered beginning of 2014
Pusher type ,22 x 4 meters, LNG gas       
Rolling mill : Pass No; 18, Speed :13.07M/Sec       
2 strands       
Cooling bed :Trough type , 60 X 9 meters       
AC furnace , Swing type
 60Hz
in year 2004 , followings are revamped
capacity upto 40 tons  by Nikko Japan
transformer newly installed, Elec control
panel( Toshiba) replaced
in yeaer 2008 Flare stack replaced
2012 carbon wire injection machine replaced
 

Ref. CGS101337

Copyright © 2013-14 Channels Global Sourcing LLP. All Rights Reserved
Powered By MSD Solutions