Technica Guss G.M.B.H 25" (635MM) Continuous Strip Caster
25" (635MM) Technica Guss Continuous Strip Caster
Manufacturer: Technica Guss G.M.B.H
Tg Line #2
Width: 25" (635MM) X .680" (17.272MM)
Previous Use: Brass & Copper Alloys/Hi Nickel Alloy
Line Consists Of:
Shaker Table
(2) Melting Furnace 5 Ton Capacity
(1) Holding Furnace 4 Ton Capacity
Caster
Withdrawal Unit
In Line Slab Milling
In Plasma Cutter
Upcoiler
Production Rate: 2100 Lbs. (950 Kg) Per Hour Max.
Casting Speed: 5 - 7 Ipm (127-178 MM/Min.)
Melting Furnaces: Ajax Magnathermic
Panel #5 S/N: Om63850a, Model E-40a-46-B
Input Power Rating, 460 Volts, 450 Kva, 980 Amps
1 Phase, 60 Hertz
Output Power Rating, 575 Volts,735 Kva, 1230 Amps
400 Kw, 1 Phase, 60 Hertz
Panel #6 **No Data Plate
Holding Furnace: Ajax Magnethremic,
Power Input Rating, 460 Volts, 160/3.5 Kva,
305/4.5 Amps, 1 Phase, 60 Hz
Power Rating Output, 460 Votls, 222 Kva, 427 Amps
140 Kw, 1 Phase, 60 Hertz
Width Drawal Unit: 15 Hp, 230/460 Volts, Fl Amps 37/18.5, 1765 Rpm
3 Phase, 60 Hertz, 16.6/8.3 Apms Mag Cur
In Line Slab Miller
Pinch Rolls: 5 Hp, Dc, 17.9 Arm Amps, 1750/2300 Rpm, 240 Volts
Cutter Drive Motor: Each Cutter - 25 Hp, 60 Hertz, 875 Rpm,
230/460 Volts, 78/39 Amps
In Line Slab Shear:
Upcoiler: 15 Hp, 1765 Rpm, 230/460 Volts,
Robertson ZR16-18 Sendzimir Reversing Mill
COPPER/BRASS PLANT FOR 400mm (15 3/4") STRIP
A Complete Plant for the melting, casting, milling, rolling, annealing and
finishing of copper, phosphor bronze and brass strip up to 400mm (15 3/4")
wide and down to 0.12mm (0.0047") thick.
Machines are for sale individually or as a complete plant:
MELTING, CASTING AND MILLING
Continuous Strip Casting Line for phosphor bronze, copper or brass strip,
420mm (16 1/2") maximum width x 15mm (0.60") maximum thickness, 0-150mm/min.
(0-6 IPM), 130 KW x 1.2 Ton Channel Melt Furnace, 130 KW x 1 Ton Holding
Furnace, Upcoiler for 2000 Kg (4,400 Lb.) coils
Continuous Strip Casting Line for phosphor bronze, copper or brass strip,
420mm (16 1/2") maximum width x 15mm (0.60") maximum thickness, 0-150mm/min.
(0-6 IPM), 350 KW x 1 Ton Coreless Melt Furnace, 130 KW x 1 Ton Holding
Furnace, Upcoiler for 2000 Kg (4,400 Lb.) Coils
Slab Milling Line, Double-Sided with Chip Removal System, 400mm (15 3/4")
maximum width, 10-15mm (0.40"- 0.60") thickness range, Pressure Rolls,
over/under Milling Machine, 15 HP, Upcoiler
ROLLING MILLS
Jones 2-HI Breakdown Mill, roll size 410mm (16") dia. x 520mm (20 1/2")
face,maximum input thickness (nonferrous) 10.5mm (0.40"), 300 KW Variable Speed
Drive, Power Screwdowns, Upcoiler
Hitachi 4-HI Reversing Mill, work roll 205mm (8") dia. x 550mm (22") face,
Backup Roll 500mm (19.7") Dia. x 510mm (20") face, thickness range 2.5mm
(0.10") in, 0.5mm (0.020") out, 0-100m/min. (0-328 FPM), 1200 Kg (2,645 Lb.)
maximum coil weight, 200 KW Main Drive, 100 KW Winder Drives, Variable Speed
Hitachi 4-HI Reversing Mill, work roll 105mm (4") dia. x 375mm (14 3/4")
face,Backup Roll 400mm (15 3/4") dia. x 330mm (13") face, 280mm (11") maximum
strip width, 0.12mm (0.005") finish thickness, Vollmer Thickness Gauges, 75 HP
Main Drive, 37 KW Winder Drives (12546)
Robertson ZR16-18 Sendzimir Reversing Mill, 12-HI, 457mm (18") maximum strip
width, 1.2mm (0.047") entry thickness, 0.2mm (0.008") exit thickness, 0-
120m/min. (0-400 FPM) Line Speed, 120 HP Main Drive, 50 HP Winder Drives,
1500 KG (3,300 Lb.) coil weight (12562)
ANNEALING AND CLEANING LINES
Bell Annealing Furnaces for Strip, 4 Sets, Nitrogen Atmosphere, Electric
from 100-136 KW, Temps from 440 Deg. C - 900 Deg. C, Coil O.D. from 900-1200mm,
maximum load from 3-8 Ton
Coil to Coil Annealing Furnace for 400mm (15.7") maximum strip width,
1-0.18mm (0.040"- .007") thickness, 180 KW Electric, Nitrogen Atmosphere, 1200 Kg
(2,645 Lb.) maximum coil weight
Coil to Coil Strip Pickling and Cleaning Line for nonferrous metal, 400mm
(15 3/4") maximum strip width, 2-0.3mm (0.080"- 0.012") thickness range, 0-
200mm/min. (0-65 FPM) Line Speed, sulphuric acid bath, water rinse
Ref. CGS41633
E W Bliss Co 16-1/2" X 34 X 34 Bliss 4 High Non Reversing Mill
16-1/2" X 34 X 34 Bliss 4 High Non Reversing Mill
Manufacturer: E W Bliss Co
Type Mill: 4 High Non Reversing Rolling Mill
Work Roll Size: 16-1/2" (419.1mm) X 34" (863.6mm)
Work Roll Bearings: Roller Bearings
Back Up Roll Size: 34" (863.6mm) X 34" (863.6mm)
Back Up Roll Bearings;
Mill Direction: Left To Right
Mill Stand Cross Section: 26" (660.4mm) X 17" (431.8mm)
Mill Stand Window Width: 36" (914.4mm)
Screwdowns: Electro Mechanical
Spindles And Couplings: Universal
Combination Pinion Stand & Reducer
Gear Ratio Reducer: 7.08 To 1
Mill Speed: 150/450 Fpm (47/140 Meters Per Minute)
Mill Drive Motor: 1000 Hp, 250/750 Rpm, 600 V, 1340 Amps, Dc
Upcoiler
Type: 3 Bending Roll Upcoiler
Bending Rolls: 7" (177.8mm) X 34" (863.6mm)
Drive Motor: 125 Hp, Dc, 175/210 Amps, 400/1200 Rpm, 600 V.
Ref. CGS41631
Horizontal Continuous Strip Casting Line
16 1/2" (420mm) Horizontal Continuous Strip Caster
Specifications:
Type: Horizontal Continuous Strip Casting Line
Metal: Phosphor Bronze
(Suitable For Other Non Ferrous Alloys)
Maximum Width Of Strip: 420mm (16 1/2")
Maximum Thickness: 15mm (0.60")
Melting Furnace:
Type: Channel
Power Capacity: 130 Kw
Weight Capacity: 1.2 Ton
No. Of Furnaces On Line: 1
No. Of Spare Furnaces: 1
Holding Furnace:
Quantity: 1
Power Capacity: 130 Kw
Weight Capacity: 1 Ton
Casting Speed: 0-150mm/Min. (0.5.9" Ipm)
Maximum Coil Weight: 2000 Kg (4400 Lbs.)
Ref. CGS41632
